Entire Life Time Monitoring of Filament Wound Composite Cylinders Using Bragg Grating Sensors: II. Process Monitoring
Source abstract
Abstract
This article is the second of a series of three papers concerning monitoring of filament wound cylinders using Bragg gratings. In this second part, the tooling presented in Part I is used to embed gratings and thermocouples in filament wound glass reinforced epoxy composite cylinders during fabrication. Bragg grating strain was obtained from wavelength and temperature response, by a calibration technique described here. Results from tests on five cylinders show the Bragg grating’s capability to monitor strain evolution during fabrication, and the capacity to detect several phenomena occurring during cure is established, in addition to quantifying the initial material condition of the cylinder before it enters service.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Fiber Optic Sensors · Advanced MEMS and NEMS Technologies · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Messager, T., Pyrz, M., Gineste, B., Chauchot, P.: Optimal laminations of thin underwater composite cylindrical vessels. Compos. Struct. 58(4), 529–537 (2002/12).10.1016/S0263-8223(02)00162-9 ↗
2. Stringer, L.G., Hayman, R.J., Hinton, M.J., Badcock, R.A., Wisnom, M.R.: Curing stresses in thick polymer composite components Part II: Management of residual stresses. Proceedings of the 12th ICCM, Paris (France), July 5th–9th, 1999. Ref. CD-ROM paper 861, p. 1–10.
3. Mulle, M., Zitoune, R., Collombet, F., Olivier, P., Grunevald, Y.-H.: Thermal expansion of carbon–epoxy laminates measured with embedded FBGS—Comparison with other experimental techniques and numerical simulation. Compos., Part A Appl. Sci. Manuf. 38(5), 1414–1424 (2007/05).10.1016/j.compositesa.2006.08.008 ↗
4. Sorensen, L., Botsis, J., Gmür, T., Cugnoni, J.: Delamination detection and characterisation of bridging tractions using long FBG optical sensors. Compos., Part A Appl. Sci. Manuf. 38(10), 2087–2096 (2007/10)10.1016/j.compositesa.2007.07.009 ↗
5. Herzberg, I., Li, H.C.H., Dharmawan, F., Mouritz, A.P., Nguyen, M., Bayandor, J.: Damage assessment and monitoring of composite ship joins. Compos. Struct. 67(2), 205–216 (2005/2).10.1016/j.compstruct.2004.09.017 ↗
6. Ramos, C.A., de Oliveira, R., Marques, A.T.: Design of an optical fibre sensor patch for longitudinal strain measurement in structures. Mater. Des. 30(7), 2323–2331 (2008). doi: 10.1016/j.matdes.2008.11.008 .10.1016/j.matdes.2008.11.008 ↗
7. Degrieck, J., De Waele, W., Verleysen, P.: Monitoring of fibre reinforced composites with embedded optical fibre Bragg sensors, with application to filament wound pressure vessels. NDTE Int. 34(4), 289–296 (2001).10.1016/S0963-8695(00)00069-4 ↗
8. Kang, H.K., Park, J.S., Kang, D.H., Kim, C.U., Hong, C.S., Kim, C.G.: Strain monitoring of a filament wound composite tank using fiber Bragg grating sensors. Smart Mater Struct. 11(6), 848–853 (2002).10.1088/0964-1726/11/6/304 ↗
9. Brower, D.V.: Structural properties measurements in deepwater oil and gas fields using an advanced fiber optic sensor monitoring system. SAMPE J. 41(5), 6–9 (2005).
10. Lee, D.H., Kim, S.K., Lee, W.I., Ha, S.K., Tsai, S.W.: Smart cure of thick composite filament wound structures to minimize the development of residual stresses. Comp. Part A. 37(4), 530–537 (2006).10.1016/j.compositesa.2005.05.017 ↗
11. Hernández-Moreno, H., Douchin, B., Collombet, F., Choqueuse, D., Davies, P.: Influence of winding pattern on the mechanical behavior of filament wound composite cylinders under external pressure. Compos. Sci. Technol. 68(3–4), 1015–1024 (2008/03).10.1016/j.compscitech.2007.07.020 ↗
12. Hernández-Moreno, H., Douchin, B., Collombet, F., Davies, P.: Precise positioning of unit cells and embedded instrumentation for fabrication and pressure testing of filament wound tubes. 11th ECCM, Rhodes (Greece), May 31–June 3, 2004, CD ROM.
13. Hernandez-Moreno, H.: Monitoring de la fabrication de tubes composites réalisés par enroulement filamentaire et comportement mécanique sous pression externe. PhD Thesis (in French). Paul Sabatier University (2006), p. 1–238.
14. Frazão, O., Ferreira, L.A., Araujo, F.M., Santos, J.L.: Simultaneous measurement of strain and temperature using fibre Bragg gratings in a twisted configuration. J. Opt. A: Pure Appl. Opt. 7(8), 427–430 (2005).10.1088/1464-4258/7/8/014 ↗
15. Caucheteur, C., Lhomme, F., Chah, K., Blondel, M., Mégret, P.: Simultaneous strain and temperature sensor based on the numerical reconstruction of polarization maintaining fiber Bragg gratings. Opt. Lasers Eng. 44(5), 411–422 (2006).10.1016/j.optlaseng.2005.06.002 ↗
16. Ioualalen, K.: Contribution à l’étude et au développement d’un nouveau matériau de remplissage structural constitué de sphères creuses à paroi polymère. PhD Thesis (in French). Paul Sabatier University (1996).
17. Casari, P., Jacquemin, F., Davies, P.: Characterisation of residual stresses in wound composite tubes. Comp. Part A 37(2), 337–343 (2006).10.1016/j.compositesa.2005.03.026 ↗