An Experimental Study of the Influence of in-Plane Fiber Waviness on Unidirectional Laminates Tensile Properties
Source abstract
Abstract
As one of the most common process induced defects of automated fiber placement, in-plane fiber waviness and its influences on mechanical properties of fiber reinforced composite lack experimental studies. In this paper, a new approach to prepare the test specimen with in-plane fiber waviness is proposed in consideration of the mismatch between the current test standard and actual fiber trajectory. Based on the generation mechanism of in-plane fiber waviness during automated fiber placement, the magnitude of in-plane fiber waviness is characterized by axial compressive strain of prepreg tow. The elastic constants and tensile strength of unidirectional laminates with in-plane fiber waviness are calculated by off-axis and maximum stress theory. Experimental results show that the tensile properties infade dramatically with increasing magnitude of the waviness, in good agreement with theoretical analyses. When prepreg tow compressive strain reaches 1.2%, the longitudinal tensile modulus and strength of unidirectional laminate decreased by 25.5% and 57.7%, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Epoxy Resin Curing Processes · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Lukaszewicz, A.J.H.J.A., Carwyn, W., Potter, K.D.: The engineering aspects of automated prepreg layup: history, present and future. Compos. Pt. B. 43, 997–1009 (2012)10.1016/j.compositesb.2011.12.003 ↗
2. Tosh, M.W., Kelly, D.W.: On the design, manufacture and testing of trajectorial fibre steering for carbon fibre composite laminates compos. Pt. A. 31, 1047–1060 (2000)10.1016/S1359-835X(00)00063-4 ↗
3. Shirinzadeh, B., Alici, G., Foong, C.W., et al.: Fabrication process of open surfaces by robotic fibre placement. Robt. Com-Int. Manuf. 20, 17–28 (2004)10.1016/S0736-5845(03)00050-4 ↗
4. Aized, T., Shirinzadeh, B.: Robotic fiber placement process analysis and optimization using response surface method. Int. J. Adv. Manuf. Technol. 55, 393–404 (2011)10.1007/s00170-010-3028-1 ↗
5. Sonmez, F.O., Akbulut, M.: Process optimization of tape placement for thermoplastic composites. Compos. Pt. A. 38, 2013–2023 (2007)10.1016/j.compositesa.2007.05.003 ↗
6. Shirinzadeh, B., Cassidy, G., Oetomo, D., et al.: Trajectory generation for open-contoured structures in robotic fibre placement. Robt. Com-Int. Manuf. 23, 380–394 (2007)10.1016/j.rcim.2006.04.006 ↗
7. Heider, D., Piovoso, M.J., Gillespie, J.W.: A neural network model-based open-loop optimization for the automated thermoplastic composite tow-placement system. Compos. Pt. A. 34, 791–799 (2003)10.1016/S1359-835X(03)00120-9 ↗
8. Tierney, J., Gillespie, J.: Modeling of in situ strength development for the thermoplastic composite tow placement process. J. Compos. Mater. 40, 1487–1506 (2006)10.1177/0021998306060162 ↗
9. Lukaszewicz, H.J.A.: Through-thickness compression response of uncured prepreg during manufacture by automated layup. Proc. Inst. Mech. Eng. Pt. B. 226, 193–202 (2011)10.1177/0954405411411817 ↗
10. Kim, B.C., Weaver, P.M., Potter, K., et al.: Limitations of fibre placement techniques for variable angle tow composites and their process-induced defects. Paper presented at the 18th International Conference on Composite Materials, Jeju Island, Korea
11. Harper, L., Turner, T., Warrior, N., et al.: Characterisation of random carbon fibre composites from a directed fibre preforming process: the effect of tow filamentisation. Compos. Pt. A. 38, 755–770 (2007)10.1016/j.compositesa.2006.09.008 ↗
12. Croft, K., Lessard, L., Pasini, D., et al.: Experimental study of the effect of automated fiber placement induced defects on performance of composite laminates. Compos. Pt. A. 42, 484–491 (2011)10.1016/j.compositesa.2011.01.007 ↗
13. Fayazbakhsh, K., Nik, M.A., Pasini, D., et al.: Defect layer method to capture effect of gaps and overlaps in variable stiffness laminates made by automated fiber placement. Compos. Struct. 97, 245–251 (2013)10.1016/j.compstruct.2012.10.031 ↗
14. Schuerch, H.: Prediction of compressive strength in uniaxial boron fiber-metal matrix composite materials. AIAA J. 4, 102–106 (1966)10.2514/3.3391 ↗
15. Rosen, B.W.: Fiber Composite Materials. American Society for Metals, Metels Park (1965)
16. Davis J., G.: Compressive strength of fiber-reinforced composite materials. Acta Mech. 580, 364–377 (1975).10.1520/STP32320S ↗
17. Greszczuk, L.B.: Microbuckling failure of circular fiber-reinforced composites. AIAA J. 13, 1311–1318 (1975)10.2514/3.60544 ↗
18. Mrse, A.M., Piggott, M.R.: Compressive properties of unidirectional carbon fibre laminates: II. The effects of unintentional and intentional fibre misalignments. Compos. Sci. Technol. 46, 219–227 (1993)
19. Van Dreumel, W.H.M., Kamp, J.L.M.: Non Hookean behaviour in the fibre direction of carbon-fibre composites and the influence of fibre waviness on the tensile properties. J. Compos. Mater. 11, 461–469 (1977)10.1177/002199837701100408 ↗
20. Allison, B.D., Evans, J.L.: Effect of fiber waviness on the bending behavior of S-glass/epoxy composites. Mater. Design. 36, 316–322 (2012)10.1016/j.matdes.2011.11.012 ↗
21. Piggott, M.R., Lam, P.W.K.: Fatigue failure processes in aligned carbon-epoxy laminates. Paper presented at the Composite Materials, Fatigue and Fracture, Lake Buena Vista, Florida (1991)
22. Lightfoot, J.S., Wisnom, M.R., Potter, K.: A new mechanism for the formation of ply wrinkles due to shear between plies. Compos. Pt. A. 49, 139–147 (2013)10.1016/j.compositesa.2013.03.002 ↗
23. Potter, K., Khan, B., Wisnom, M., et al.: Variability, fibre waviness and misalignment in the determination of the properties of composite materials and structures. Compos. Pt. A. 39, 1343–1354 (2008)10.1016/j.compositesa.2008.04.016 ↗
24. Liu, H.W.: Material Mechanics. Higer Education Press, Beijing (2004)
25. Li, S.L.: Introducion of Composites Materials Mechanics. Shanghai Jiao Tong Uinversity Press, Shanghai (1986)
26. Wang, K.R.: Numerical Analysis. Science Press, Beijing (2014)
27. Hsiao, H.M., Daniel, I.M.: Elastic properties of composites with fiber waviness. Compos. Pt. A. 27, 931–941 (1996)10.1016/1359-835X(96)00034-6 ↗
28. Xiong, W.L.: Research on fiber placement trajectory design algorithm on meshed surface. Nanjing University of Aeronautics and Astronautics (2012)
29. Joyce, P.J., Kugler, D., Moon, T.J.: A technique for characterizing process-induced fiber waviness in unidirectional composite laminates-using optical microscopy. J. Compos. Mater. 31, 1694–1727 (1997)10.1177/002199839703101702 ↗
30. Wang, S.G., Zhang, Z.Z., Cheng, W.H.: Probability and Statistics, 2nd edn. Science Press, Beijing (2004)