The Effect of Composite Patches on the Failure of Adhesively-Bonded Joints Under Bending Moment
Source abstract
Abstract
In this study, it was aimed to compare mechanical behavior of double-strap joints with aluminum (AA2024-T3) or 16-ply laminate of carbon/epoxy composite (T300/934) patches of different orientation angles at their overlap area subjected to bending moment. For this purpose, AA2024-T3 aluminum was used as adherend, while the adhesive was a two-part paste (DP 460). Six different types of joint samples were subjected to bending moment. The effect of patch material on failure load and stress distribution was examined experimentally and numerically. In the numerical analysis, the composite patches were assumed to behave linearly elastic, while adherend and adhesive layers were assumed to be nonlinear. It was found that the data obtained from 3-D finite element analysis were coherent with experimental results. Meanwhile, experiments showed that fiber orientation angles of the patches markedly affected the failure load of joints, failure mode and stress distributions appeared in adhesive and composite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Mechanical Behavior of Composites · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. İçten, B.M., Karakuzu, R.: Progressive failure analysis of pin-loaded carbon-epoxy woven composite plates. Compos. Sci. Technol. 62, 1259–1271 (2002)10.1016/S0266-3538(02)00071-4 ↗
2. Akpinar, S.: Effects of laminate carbon/epoxy composite patches on the strength of double-strap adhesive joints: experimental and numerical analysis. Mater. Des. 51, 501–512 (2013)10.1016/j.matdes.2013.04.037 ↗
3. Mortensen, F., Thomsen, O.T.: Coupling effects in adhesive bonded joints. Compos. Struct. 56, 165–174 (2002)10.1016/S0263-8223(02)00002-8 ↗
4. Oplinger, D.W.: Effects of adherend deflectıons in single lap joints. Int. J. Solids Struct. 3, 2565–2587 (1994)10.1016/0020-7683(94)90037-X ↗
5. Adams, R.D., Peppiatt, N.A.: Effect of poisson’s ratio strains in adherends on stresses of an ıdealized lap joint. J. Strain. Anal. 8, 134–139 (1973)10.1243/03093247V082134 ↗
6. Adams, R.D., Peppiatt, N.A.: Stress analysis of adhesive-bonded lap joints. J. Strain. Anal. 9, 185–196 (1974)10.1243/03093247V093185 ↗
7. Chen, D., Cheng, S.: An analysis of adhesive-bonded single-lap joints. J. Appl. Mech. Trans. ASME 50, 109–115 (1983)10.1115/1.3166976 ↗
8. Costa Mattas, H.S., Monteiro, A.H., Palazzetti, R.: Failure analysis of adhesively bonded joints in composite materials. Mater. Des. 33, 242–247 (2012)10.1016/j.matdes.2011.07.031 ↗
9. Sayman, O., Ozen, M., Korkmaz, B.: Elasto-plastic stress distributions in adhesively bonded double lap joints. Mater. Des. 45, 31–35 (2013)10.1016/j.matdes.2012.09.005 ↗
10. Mortensen, F., Thomsen, O.T.: Analysis of adhesive bonded joints: a unified approach. Compos. Sci. Technol. 62, 1011–1031 (2002)10.1016/S0266-3538(02)00030-1 ↗
11. Harris, J.A., Adams, R.D.: Strength prediction of bonded single lap joints by nonlinear finite element methods. Int. J. Adhes. Adhes. 4, 65–78 (1984)10.1016/0143-7496(84)90103-9 ↗
12. Panigrahi, S.K., Pradhan, B.: Delamination damage analyses of FRP composite spar wingskin joints with modified elliptical adhesive load coupler profile. Appl. Compos. Mater. 15, 189–205 (2008)10.1007/s10443-008-9067-1 ↗
13. Richardson, G., Crocombe, A.D., Smith, P.A.: A comparison of two- and three-dimensional finite element analyses of adhesive joints. Int. J. Adhes. Adhes. 13, 193–200 (1993)10.1016/0143-7496(93)90042-8 ↗
14. Khalili, S.M.R., Ghaznavi, A.: Behavior and failure modes of sandwich T-joint using cohesive zone material model and contact elements. Appl. Compos. Mater. 20, 41–54 (2013)10.1007/s10443-012-9248-9 ↗
15. Gonçalves, J.P.M., de Moura, M.F.S.F., de Castro, P.M.S.T.: A three-dimensional finite element model for stress analysis of adhesive joints. Int. J. Adhes. Adhes. 22, 357–365 (2002)10.1016/S0143-7496(02)00015-5 ↗
16. Panigrahi, S.K.: Damage analyses of adhesively bonded single lap joints due to delaminated FRP composite adherends. Appl. Compos. Mater. 16, 211–223 (2009)10.1007/s10443-009-9087-5 ↗
17. Aydin, M.D., Özel, A., Temiz, Ş.: Non-linear stress and failure analyses of adhesively-bonded joints subjected to a bending moment. J. Adhes. Sci. Technol. 18, 1589–1602 (2004)10.1163/1568561042411286 ↗
18. Magalhaes, A.G., de Moura, M.F.S.F., Gonçalves, J.P.M.: Evaluation of stress concentration effects in single-lap bonded joints of laminate composite materials. Int. J. Adhes. Adhes. 25, 313–319 (2005)10.1016/j.ijadhadh.2004.10.002 ↗
19. Wang, C.H., Rose, L.R.F.: Determination of triaxial stresses in bonded joints. Int. J. Adhes. Adhes. 17, 17–25 (1997)10.1016/S0143-7496(96)00028-0 ↗
20. Tsai, M.Y., Morton, J., Matthews, F.L.: Experimental and numerical studies of a laminated composite single-lap adhesive joint. J. Compos. Mater. 29, 1254–1275 (1995)10.1177/002199839502900906 ↗
21. Baker, A.A.: A proposed approach for certification of bonded composite repairs to flight-critical airframe structure. Appl. Compos. Mater. 18, 337–369 (2011)10.1007/s10443-010-9161-z ↗
22. Baker, A.A., Rajic, N., Davis, C.: Towards a practical structural health monitoring technology for patched cracks in aircraft structure. Compos. B 40, 1340–1352 (2009)10.1016/j.compositesa.2008.09.015 ↗
23. Adams, R.D., Davies, R.: Strength of joints ınvolving composites. J. Adhes. 59, 171–182 (1996)10.1080/00218469608011086 ↗
24. Bogdanovich, A.E., Kizhakkethara, I.: Three-dimensional finite element analysis of double-lap composite adhesive bonded joint using submodeling approach. Compos. B 30, 537–551 (1999)10.1016/S1359-8368(99)00026-8 ↗
25. Kaye, R., Heler, M.: Finite element-based three-dimensional stress analysis of composite bonded repairs to metallic aircraft structure. Int. J. Adhes. Adhes. 26, 261–273 (2006)10.1016/j.ijadhadh.2005.03.016 ↗
26. Mokhtari, M., Madani, K., Belhouari, M., Touzain, S., Feaugas, X., Ratwani, M.: Effects of composite adherend properties on stresses in double lap bonded joints. Mater. Des. 44, 633–639 (2013)10.1016/j.matdes.2012.08.001 ↗
27. da Silva, L.F.M., Adams, R.D.: Techniques to reduce the peel stresses in adhesive joints with composites. Int. J. Adhes. Adhes. 27, 227–235 (2007)10.1016/j.ijadhadh.2006.04.001 ↗
28. Panigrahi, S.K., Pradhan, B.: Three dimensional failure analysis and damage propagation behavior of adhesively bonded single lap joints in laminated. J. Reinf. Plast. Compos. 26, 183–201 (2007)10.1177/0731684407070026 ↗
29. Galliot, C., Rousseau, J., Verchery, G.: Drop weight tensile ımpact testing of adhesively bonded carbon/epoxy laminate joints. Int. J. Adhes. Adhes. 35, 68–75 (2012)10.1016/j.ijadhadh.2012.02.002 ↗
30. Khalili, S.M.R., Shokuhfar, A., Hoseini, S.D., Bidkhori, M., Khalili, S., Mittal, R.K.: Experimental study of the ınfluence of adhesive reinforcement in lap joints for composite structures subjected to mechanical loads. Int. J. Adhes. Adhes. 28, 436–444 (2008)10.1016/j.ijadhadh.2008.04.009 ↗
31. Nguyen, K.-H., Kweon, J.-H., Choi, J.-H.: Failure load prediction by damage zone method for single-lap bonded joints of carbon composite and aluminum. J. Compos. Mater. 43, 3031–3056 (2009)10.1177/0021998309345295 ↗
32. Reis, P.N.B., Ferreira, J.M., Richardson, M.O.W.: Effect of the surface preparation on pp reinforced glass fiber adhesive lap joints strength. J. Thermoplast. Compos. Mater. 25, 3–13 (2012)10.1177/0892705711408161 ↗
33. ISO 15166-2. Adhesives-methods of preparing bulk specimens. Part 2: Elevated temperature curing one-part systems (2000)
34. ISO 527-2. Plastics— Determination of tensile properties. Part 2: Test conditions for moulding and extrusion of plastics (1993)
35. Akpinar, S., Temiz, S., Aydın, M.D., Ozel, A.: Effect of protrusion at the ends of bondline in single lap joints under tension and bending. J. Adhes. Sci. Technol. 26, 2591–2602 (2012)10.1080/01694243.2012.691002 ↗
36. Goetschel, D.B., Radford, D.W.: Analytical development of through-thickness properties of composite laminates. J. Adv. Mater. Covina. 28, 37–46 (1997)
37. ANSYS®. The General Purpose Finite Element Software (Version 14.0), Swanson Analysis Systems, Inc., Houston, Texas
38. Zhao, X.L., Zhang, L.: State-of-the-art review on FRP strengthened steel structures. Eng. Struct. 29, 1808–1823 (2007)10.1016/j.engstruct.2006.10.006 ↗
39. ISO 10365. Adhesives- Designation of main failure patterns 1992(E)