Experimental and Numerical Analysis of Inserts in Sandwich Structures

In aeronautics, sandwich structures are widely used for secondary structures like flaps or landing gear doors. In the case of landing gear doors, the junction is made by a local reinforcement called an insert. This insert is made by a resin molded in the Nomex™ sandwich core. Such structures are still designed mainly using test results and the lack of an efficient numerical model remains a problem. The purpose of this study is on the one hand to perform experiments in order to be able to identify the failure modes and on the other hand to propose an efficient numerical model. Pull-out tests with cycling were conducted and 3D displacement measured by optical methods. The potential failure modes are numerous (delamination, local fiber breaking, skin/core debonding, core crushing, core shear buckling, potting failure, etc.). Experiments demonstrated that, for the lower loads, the non-linearity and the hysteresis are mainly due to core shear buckling. From this observation, the nonlinear behavior of the core is identified by a 3 point-bending test. The shear-modulus damage law is then implemented on a non-linear finite element model and an acceptable correlation of the tests is achieved. As a consequence, some improvements of the technology will be proposed, manufactured and tested.