Microwaves Sensor for Wind Turbine Blade Inspection
Source abstract
Abstract
The structural integrity of wind turbine blades can be adversely affected by their structural dynamics, temperature extremes, lightning strikes, ultraviolet radiation from sunlight and airborne particulate matter such as hailstones and sand. If subsurface delamination occurs and is undetected then this can lead to fibre breakage and catastrophic failures in composite blades. In this paper we introduce a microwave scanning technique that detects such delamination in practical blade assemblies. Using an open-ended waveguide sensor, the electromagnetic signal reflected from the composite is found to have a phase profile that can detect changes in the composite cross section. Glass fibre T-joints are scanned and the results used to detect thickness variations (e.g., the presence of the web) and delamination. Results are compared across the 18–20 GHz frequency band. The dielectric permittivity of the composite system is measured and is used to estimate the stand-off distance and operating frequency of the sensor. This is critical to the system’s ability to detect damage. When the sensor is close to the surface of the structure (standoff distance ≈ 5 mm), delamination down to 0.2 mm in width could be detected.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Icing and De-icing Technologies · Structural Health Monitoring Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Al-Khudairi, O., Ghasemnejad, H.: To improve failure resistance in joint design of composite wind turbine blade materials. Renew. Energy 81, 936–951 (2015)10.1016/j.renene.2015.04.015 ↗
2. Blanco, M.I.: The economics of wind energy. Renew. Sustain. Energy Rev. 13, 1372–1382 (2009)10.1016/j.rser.2008.09.004 ↗
3. Mandell, J.F., Samborsky, D.D., Agastra, P.: Composite materials fatigue issues in wind turbine blade construction. In: Society for the Advancement of Material and Process Engineering., Long Beach, CA (2008)
4. Brøndsted, P., Lilholt, H., Lystrup, A.: Composite materials for wind power turbine blades. Annu. Rev. Mater. Res. 35, 505–538 (2005)10.1146/annurev.matsci.35.100303.110641 ↗
5. Chou, J.-S., Tu, W.-T.: Failure analysis and risk management of a collapsed large wind turbine tower. Eng. Fail. Anal. 18, 295–313 (2011)10.1016/j.engfailanal.2010.09.008 ↗
6. Li, D., Ho, S.-C.M., Song, G., Ren, L., Li, H.: A review of damage detection methods for wind turbine blades. Smart Mater. Struct. 24, 33001 (2015)10.1088/0964-1726/24/3/033001 ↗
7. Kabir, M.J., Oo, A.M.T., Rabbani, M.: A brief review on offshore wind turbine fault detection and recent development in condition monitoring based maintenance system. In: 2015 Australasian Universities Power Engineering Conference (AUPEC). pp. 1–7. IEEE (2015)10.1109/AUPEC.2015.7324871 ↗
8. Yang, R., He, Y., Zhang, H.: Progress and trends in nondestructive testing and evaluation for wind turbine composite blade. Renew. Sustain. Energy Rev. 60, 1225–1250 (2016)10.1016/j.rser.2016.02.026 ↗
9. Wymore, M.L., Van Dam, J.E., Ceylan, H., Qiao, D.: A survey of health monitoring systems for wind turbines. Renew. Sustain. Energy Rev. 52, 976–990 (2015)10.1016/j.rser.2015.07.110 ↗
10. Rumsey, M.A., Paquette, J.A.: Structural health monitoring of wind turbine blades. In: Ecke, W., Peters, K.J., Meyendorf, N.G. (eds.) Smart sensor phenomena, technology, networks, and systems, p. 69330E. International Society for Optics and Photonics, San Diego, California (2008)10.1117/12.778324 ↗
11. Li, Z., Haigh, A., Soutis, C., Gibson, A., Sloan, R., Karimian, N.: Delamination detection in composite T-joints of wind turbine blades using microwaves. Adv. Compos. Lett. 25, 83–86 (2016)
12. Li, Z., Haigh, A., Soutis, C., Gibson, A., Sloan, R., Karimian, N.: Microwave imaging for delamination detection in T-joints of wind turbine composite blades. In: The 46th European Microwave Conference (EuMC) (2016).10.1109/EuMC.2016.7824573 ↗
13. Moll, J., Krozer, V., Arnold, P., Dürr, M., Zimmermann, R., Salman, R., Hübsch, D., Pozdniakov, D., Friedmann, H., Nuber, A., Scholz, M., Kraemer, P.: Radar-based structural health monitoring of wind turbine blades. In: 19th World Conference on Non-Destructive Testing., Munich, Germany (2016)
14. Zoughi, R., Ganchev, S.: Microwave nondestructive evaluation: state-of-the-art review., Austin, Texas (1995)10.21236/ADA294388 ↗
15. Kharkovsky, S., Zoughi, R.: Microwave and millimeter wave nondestructive testing and evaluation - Overview and recent advances. IEEE Instrum. Meas. Mag. 10, 26–38 (2007)10.1109/MIM.2007.364985 ↗
16. Hosoi, A., Yamaguchi, Y., Ju, Y., Sato, Y., Kitayama, T.: Detection and quantitative evaluation of defects in glass fiber reinforced plastic laminates by microwaves. Compos. Struct. 128, 134–144 (2015)10.1016/j.compstruct.2015.03.050 ↗
17. Carriveau, G.W.: Benchmarking of the state-of-the-art in nondestructive testing/evaluation for applicability in the composite armored vehicle (CAV) advanced technology demonstrator (ATD) program., San Antonio (1993)
18. Hosoi, A., Ju, Y.: Nondestructive detection of defects in GFRP laminates by microwaves. J. Solid Mech. Mater. Eng. 4, 1711–1721 (2010)10.1299/jmmp.4.1711 ↗
19. Green, G., Campbell, P., Zoughi, R.: An investigation into the potential of microwave NDE for maritime application. In: 16th World Conference of Non-Destructive Testing. pp. 30–37., Montreal, Canada (2004)
20. Wang, Y., Soutis, C., Hajdaei, A., Hogg, P.J.: Finite element analysis of composite T-joints used in wind turbine blades. Plast. Rubber Compos. 44, 87–97 (2015)10.1179/1743289814Y.0000000113 ↗
21. Ciang, C.C., Lee, J.-R., Bang, H.-J.: Structural health monitoring for a wind turbine system: a review of damage detection methods. Meas. Sci. Technol. 19, 122001 (2008)10.1088/0957-0233/19/12/122001 ↗
22. Hajdaei, A.: Extending the fatigue life of a t-joint in a composite wind turbine blade, (2013)
23. Qaddoumi, N., Ganchev, S., Zoughi, R.: Microwave diagnosis of low-density fiberglass composites with resin binder. Res. Nondestruct. Eval. 8, 177–188 (1996)10.1080/09349849609409597 ↗
24. Li, Z., Haigh, A., Soutis, C., Gibson, A.: Simulation for the impact damage detection in composites by using the near-field microwave waveguide imaging. In: The 53rd Annual Conference of The British Institute of Non-Destructive Testing., Manchester, UK (2014)
25. Haigh, A.D., Thompson, F., Gibson, A.A.P., Campbell, G.M., Fang, C.: Complex permittivity of liquid and granular materials using waveguide cells. Subsurf. Sens. Technol. Appl. 2, 425–434 (2001)10.1023/A:1013273102533 ↗
26. Haupt, R.: Using MATLAB to control commercial computational electromagnetics software. ACES 23, 98–103 (2008)