journal article·2000-05

A Study on Polymer Composite Strengthening Systems for Concrete Columns

Shi Zhang, Lin Ye, Yiu-Wing Mai

Applied Composite Materials· Volume 7· Issue 2-3
Publisher page

Abstract

An experimental study was conducted to investigate the effects of various composite wrapping systems with different fibres (E-glass and carbon), resins (vinyl-ester and epoxy) and architectures on the strengthening efficiency for wrapped concrete columns. Raw material costs were evaluated to identify the cost-efficiency of each individual system. The results indicated that the use of E-glass fibres with vinyl-ester resin to reinforce concrete columns externally is effective with a low cost of raw materials. The epoxy resin-based system does not show much improvement in the load carrying capacity. The small R/T ratio (thickness of wrap/radius of concrete column) may cause a low strengthening efficiency. Glass fibre mats were hybridised with carbon fibre layers to obtain better mechanical properties and an increased thickness of the composite wraps. Reinforcing efficiency is also highly dependent on the composite architecture. The fibre reinforcement in the hoop direction gives a high confining efficiency to the concrete columns. However, a certain amount of fibres in the axial direction are still needed in designing composite wraps, especially for long, slender columns.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Masonry and Concrete Structural Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Schie, I. P., 'Repair Strategies for Concrete Structures Damaged by Steel Corrosion', in Rehabilitation of Concrete Structures, Proceeding of the International RILEM/CSIRO/ACRA Conference, Melbourne, September, 1992, pp. 1–22.
2. Karbhari, V. M. and Eckel, D. A., 'Strengthening of Concrete Column Stubs through Resin Infused Composite Wraps', J. Thermoplastic Composite Materials 6, 1993, 93–107.10.1177/089270579300600201 ↗
3. Ballinger, A. C. and Craig, P. E., 'Infrastructure Repair and Retrofit Strengthening with External FRP Systems', Composites Fabrication 10, 1997, 18–22.
4. Furlong, R.W., 'Strength of Steel-Encased Concrete Beam Columns', ASCE J. Structural Eng. 93, 1967, 113–124.
5. Knowles, R. B. and Park, R., 'Strength of Concrete Filled Steel Tubular Columns,' ASCE J. Structural Eng. 95, 1969, 2565–2587.
6. Cooper, J. D., 'Advanced Composite-Backbone for a New Area in Bridge Engineering Research', in Advanced Composites Materials in Civil Engineering Structures, Proc. ASCE Specialty Conference, Las Vegas, 1991, pp. 22–30.
7. McKenna, J. K. and Erki, M. A., 'Strengthening of Reinforced Concrete Members Using Externally Applied Steel Plates and Fibre Composite Sheets-a Survey', Can. J. Civ. Eng. 21, 1994, 16–24.10.1139/l94-002 ↗
8. Triantafillou, T. C., Deskovic, N., and Deuring, M., 'Strengthening of Concrete Strucures with Prestressed Fibre Reinforced Plastic Sheets', ACI Structural J. 89, 1992, 235–244.
9. Priestley, M. J., Fyfe, E., and Seibl, F., 'Column Retrofitting Using Fibreglass/Epoxy Jackets', in 1st Annual Seismic Workshop, CalTrans, Sacramento, 1991, pp. 271–225.
10. Triantafillou, T. C. and Plevris, N., 'Post-strengthening of R/C Beams with Epoxy Bonded Fibre Composite Materials', in Adv. Composite Materials in Civil Eng. Structures, Proc.ASCE, Specialty Conf., Las Vegas, 1991, pp. 245–256.
11. Tanake, T. and Yagi, K., 'Retrofit Method with Carbon Fibre for Reinforced Concrete Structures', Adv. Composite Materials 4, 1994, 183–195.10.1163/156855194X00303 ↗
12. Hexcel, F., 'Composite Wrapped Bridger Columns Survive California Earthquake', High-Performance Composites, March/April, 1994, 7–8.
13. Katsumata, H., Kobatake, Y., and Takeda, T., 'A Study on Strengthening with Carbon Fibre for Earthquake-Resistant Capacity of Existing Reinforced Columns', in Proceedings of the 9th World Conference on Earthquake Engineering, Vol. 7, Tokyo-Kyoto, 1988, pp. 517–522.
14. Tanaka, T., Yagi, K., Kojima, N., Kimura, K., and Katsumata, H., 'RetrofitMethod with Carbon Fibre for Reinforced Concrete Structures', Adv. Composite Materials 4, 1994, 183–195.10.1163/156855194X00303 ↗
15. Jin, L., Saadatmanesh, H., and Ehsani, M. R., 'Seismic Retrofit of Existing Reinforced Concrete Columns by Glass-Fibre Composites', in Infrastructure Repair Methods-Infrastructure: New Materials and Methods of Repair, Proceedings of the Materials Engineering Conference, ASCE, New York, NY, 1994, pp. 758–764.
16. Howie I., Vistasp, M. and Karbhari, V. M., 'Effect of Tow Sheet Composite Wrap Architecture on Strengthening of Concrete Due to Confinement: I-Experimental Studies', J. Reinforced Plastics and Composites 14, 1995, 1008–1030.10.1177/073168449501400906 ↗
17. Breen, J. E. and Ferguson, P. M., 'The Restrained Long Concrete Column as a Part of a Rectangular Frame, Long Reinforced Concrete Columns', in A Collection of Papers Selected by the Reinforced Concrete Research Council, Published by the American Society of Civil Engineers, New York, 1981, pp. 1–50.
18. Strong, B. A., 'Wrapping a Concrete Bridge with Pre-preg Tow-Photo Courtesy of Thiokol', Composite Fabrication,March, 1997, 15.