Wear Behavior of Basalt Filled Low Density Polyethylene Composites
Source abstract
Abstract
The friction and wear performance of pure LDPE and 10%, 30%, 50% and 70% basalt filled (by wt) LDPE composite were comparatively evaluated under dry sliding conditions. Wear tests were carried out at room temperature under 5, 10 and 20N loads and at 0.5, 1.0 and 1.5 m/s sliding speeds. The coefficients of friction of the composites were significantly influenced with increase in basalt content. Friction coefficient of the LDPE was getting decreased from 0.51 to 0.13 with increase in basalt content, depending on applied loads and sliding speeds. The results show that the wear rates for pure LDPE and basalt filled composites increase with increasing loads and sliding speeds. The wear rates of the basalt filled composites were significantly affected from the basalt content. Wear rates of the LDPE was decreased from 2.596 × 10−3 to 6.8 × 10−5 mm3/m with increase in basalt content, depending on applied loads and sliding speeds.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Natural Fiber Reinforced Composites · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Bekhet, N.E.: Tribological behavior of drawn polypropylene. Wear. 236, 55–61 (1999)10.1016/S0043-1648(99)00262-8 ↗
2. Unal, H., Mimaroglu, A., Serdar, V.: Dry sliding performance of thermoplastics against reinforced unsaturated polyester (BMC): In use in electrical contact breakers components. Wear. 261, 841–847 (2006)10.1016/j.wear.2006.01.021 ↗
3. Guiot, O., Tighzert, L., Coqueret, X.: Electron beam cross linking of extrusion-blown LDPE Films: 1. Mechanical properties. Eur. Polym. J. 35, 565–570 (1999)10.1016/S0014-3057(98)00176-1 ↗
4. Taekx, P., Taex, J.C.: Chain architecture of LDPE as a function of molar mass using size exclusion chromatography and multi-angle laser light scattering. Polymer. 39, 3109–3113 (1998)10.1016/S0032-3861(97)10098-2 ↗
5. Zhiyonga, Y., Mielczarski, E., Mielczarski, J., Laub, D., Buffat, P., Klehm, U., Albers, P., Lee, K., Kulik, A., Minsker, L.K., Renken, A., Kiwi, J.: Preparation, stabilization and characterization of TiO2 on thin polyethylene films (LDPE): Photocatalytic applications. Water Res. 41, 862–874 (2007)10.1016/j.watres.2006.11.020 ↗
6. Sanchis, M.R., Blanes, V., Blanes, M., Garcia, D., Balart, R.: Surface modification of low density polyethylene (LDPE) film by low pressure O2 plasma treatment. Eur. Polym. J. 42, 1558–1568 (2006)10.1016/j.eurpolymj.2006.02.001 ↗
7. Sanchis, R., Fenollar, O., Garci, D., Sanchez, L., Balart, R.: Improved adhesion of LDPE films to polyolefin foams for automotive industry using low-pressure plasma. Int. J. Adhes. Adhes. 28, 445–451 (2008)10.1016/j.ijadhadh.2008.04.002 ↗
8. Rosato, D.V., Schott, N.R., Rosato, M.G.: Plastics Engineering, Manufacturing and Data Handbook. Plastics Institute of America, Springer. (2006)
9. Weidenfeller, B.: Internal friction studies of particulate filled polypropylene. Mat. Sci. Eng. A-Struct. 442, 371–374 (2006). http://www.sciencedirect.com/science/article/pii/S092150930601132410.1016/j.msea.2005.12.086 ↗
10. Unal, H., Sen, U., Mimaroglu, A.: Abrasive wear behavior of polymeric materials. Mater. Des. 26, 705–710 (2005)10.1016/j.matdes.2004.09.004 ↗
11. Bijwe, J., Indumathi, J., Rajesh, J.J., Fahim, M.: Friction and wear behavior of polyetherimide composites in various wear modes. Wear. 249, 715–726 (2001)10.1016/S0043-1648(01)00696-2 ↗
12. Indumathi, J., Bijwe, J., Ghosh, A.K., Fahim, M., Krishnaraj, N.: Wear of cryo-treated engineering polymers and composites. Wear. 225, 343–353 (1999)10.1016/S0043-1648(99)00063-0 ↗
13. Beall, G.H., Rittler, H.L.: Basalt glass-ceramics. Am. Ceram. Soc. Bull. 55, 579–582 (1976)
14. Yilmaz, S., Ozkan, O.T., Gunay, V.: Crystallization kinetics of basalt glass. Ceram. Int. 22, 477–481 (1996)10.1016/0272-8842(95)00118-2 ↗
15. Znidarsic, V., Kolar, D.: The crystallization of diabase glass. J. Mater. Sci. 26, 2490–2494 (1991)10.1007/BF01130200 ↗
16. Karamanov, A., Arrizza, L., Ergul, S.: Sintered material from alkaline basaltic tuffs. J. Eur. Ceram Soc. 29, 595–601 (2009)10.1016/j.jeurceramsoc.2008.07.002 ↗
17. Unal, H., Sen, U., Mimaroglu, A.: Dry sliding wear characteristics of some industrial polymers against steel counter face. Tribol. Int. 37, 727–732 (2004)10.1016/j.triboint.2004.03.002 ↗
18. Wang, Y.Q., Lee, J.: Sliding wear behavior and mechanism of ultra-high molecular weight polyethylene. Mat. Sci. Eng. A-Struct. 266, 155–160 (1999). http://www.sciencedirect.com/science/article/pii/S092150939900040410.1016/S0921-5093(99)00040-4 ↗
19. Myshkin, N.K., Petrokovets, M.I., Kovalev, A.V.: Tribology of polymers: Adhesion, friction, wear, and mass-transfer. Tribol. Int. 38, 910–921 (2005)10.1016/j.triboint.2005.07.016 ↗
20. Yang, J.M., Chen, H.S., Hsu, Y.G., Lin, F.H., Chang, Y.H.: Organic-inorganic hybrid sol-gel materials, 2 Application for dental composites. Angew Makromol. Chem. 251, 61–72 (1997)10.1002/apmc.1997.052510106 ↗
21. Vina, J., Garcia, M.A., Castrillo, M.A., Vina, I., Arguelles, A.: Wear behavior of a glass fiber-reinforced PEI composite. J. Thermoplast. Compos. 21, 279–286 (2008)10.1177/0892705708089481 ↗