journal article·2010-06

Experimental Investigation of Dynamically Loaded Bolted Joints in Carbon Fibre Composite Structures

Garth M. Pearce, Alastair F. Johnson, Rodney S. Thomson, Donald W. Kelly

Applied Composite Materials· Volume 17· Issue 3
Publisher page

Abstract

This paper presents quasi-static and dynamic modelling of bolted composite structures using the explicit finite element code PAM-CRASH. User controlled point link (PLINK) elements were investigated for modelling the bolted composite joints used in the structures. Simulation results were compared with quasi-static and dynamic structural testing reported previously. Two loading configurations were considered. It was shown that the PLINK element modelling approach agreed well with the experimental results for both loading configurations and for one case offered significant improvements over other simplified bolt modelling methods. A stacked shell modelling approach was used to model the interlaminar delamination damage present in the ball-loaded impact mode. The overall response of the structure was significantly improved by the addition of these energy absorbing interfaces.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Load-Bearing Analysis · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Badders, D.: Dreamliner 101: All about the Boeing 787. 2007 [cited 2008 May 23rd]; Available from: http://seattlepi.nwsource.com/boeing/787/787primer.asp
2. McCarthy, M.: BOJCAS: bolted joints in composite aircraft structures. Air Space Eur. 3(3–4), 139–142 (2001)10.1016/S1290-0958(01)90077-2 ↗
3. Khashaba, U.A., Sallam, H.E.M., Al-Shorbagy, A.E., Seif, M.A.: Effect of washer size and tightening torque on the performance of bolted joints in composite structures. Compos. Struct. 73(3), 310–317 (2006)10.1016/j.compstruct.2005.02.004 ↗
4. McCarthy, M.A., Lawlor, V.P., Stanley, W.F., McCarthy, C.T.: Bolt-Hole clearance effects and strength criteria in single-bolt, single-lap, composite bolted joints. Compos. Sci. Tech. 62, 1415–1431 (2002)10.1016/S0266-3538(02)00088-X ↗
5. Lawlor, V.P., McCarthy, M.A., Stanley, W.F.: Experimental study on effects of clearance on single bolt, single shear, composite bolted joints. Plast. Rubber Compos. 31, 405–411 (2002)10.1179/146580102225006521 ↗
6. Lawlor, V.P., McCarthy, M.A., Stanley, W.F.: An experimental study of bolt-hole clearance effects in double-lap, multi-bolt composite joints. Compos. Struct. 71(2), 176–190 (2005)10.1016/j.compstruct.2004.09.025 ↗
7. Park, H.-J.: Effects of stacking sequence and clamping force on the bearing strengths of mechanically fastened joints in composite laminates. Compos. Struct. 53(2), 213–221 (2001)10.1016/S0263-8223(01)00005-8 ↗
8. Kelly, G.: Quasi-static strength and fatigue life of hybrid (bonded/bolted) composite single-lap joints. Compos. Struct. 72(1), 119–129 (2006)10.1016/j.compstruct.2004.11.002 ↗
9. Icten, B.M., Karakuzu, R.: Progressive failure analysis of pin-loaded carbon-epoxy woven composite plates. Compos. Sci. Tech. 62(9), 1259–1271 (2002)10.1016/S0266-3538(02)00071-4 ↗
10. Icten, B.M., Karakuzu, R., Toygar, M.E.: Failure analysis of woven kevlar fiber reinforced epoxy composites pinned joints. Compos. Struct. 73(4), 443–450 (2006)10.1016/j.compstruct.2005.02.016 ↗
11. Kelly, G., Hallström, S.: Bearing strength of carbon fibre/epoxy laminates: effects of bolt-hole clearance. Compos. B Eng. 35(4), 331–343 (2004)10.1016/j.compositesb.2003.11.001 ↗
12. Okutan, B.: The effects of geometric parameters on the failure strength for pin-loaded multi-directional fiber-glass reinforced epoxy laminate. Compos. B Eng. 33(8), 567–578 (2002)10.1016/S1359-8368(02)00054-9 ↗
13. Okutan, B., Karakuzu, R.: The strength of pinned joints in laminated composites. Compos. Sci. Tech. 63(6), 893–905 (2003)10.1016/S0266-3538(02)00313-5 ↗
14. Camanho, P.P., Matthews, F.L.: A progressive damage model for mechanically fastened joints in composite laminates. J. Compos. Mater. 33(24), 2248–2280 (1999)10.1177/002199839903302402 ↗
15. Wu, T.J., Hahn, H.T.: The bearing strength of e-glass/vinyl-ester composites fabricated by vartm. Compos. Sci. Tech. 58(9), 1519–1529 (1998)10.1016/S0266-3538(97)00180-2 ↗
16. Dano, M.-L., Gendron, G., Picard, A.: Stress and failure analysis of mechanically fastened joints in composite laminates. Compos. Struct. 50(3), 287–296 (2000)10.1016/S0263-8223(00)00119-7 ↗
17. Dano, M.-L., Kamal, E., Gendron, G.: Analysis of bolted joints in composite laminates: Strains and bearing stiffness predictions. Compos. Struct. 79(4), 562–570 (2007)10.1016/j.compstruct.2006.02.024 ↗
18. Echavarría, C., Haller, P., Salenikovich, A.: Analytical study of a pin-loaded hole in elastic orthotropic plates. Compos. Struct. 79(1), 107–112 (2007)10.1016/j.compstruct.2005.11.038 ↗
19. Karakuzu, R., Gulem, T., Icten, B.M.: Failure analysis of woven laminated glass-vinylester composites with pin-loaded hole. Compos. Struct. 72(1), 27–32 (2006)10.1016/j.compstruct.2004.10.009 ↗
20. Kradinov, V., Madenci, E., Ambur, D.R.: Application of genetic algorithm for optimum design of bolted composite lap joints. Compos. Struct. 77(2), 148–159 (2007)10.1016/j.compstruct.2005.06.009 ↗
21. Kradinov, V., Madenci, E., Ambur, D.R.: Combined in-plane and through-the-thickness analysis for failure prediction of bolted composite joints. Compos. Struct. 77(2), 127–147 (2007)10.1016/j.compstruct.2005.06.008 ↗
22. McCarthy, M.A., McCarthy, C.T.: Finite element analysis of effects of clearance on single shear composite bolted joints. Plast Rubber Compos 32, 65–70 (2003)10.1179/146580103225001390 ↗
23. McCarthy, M.A., McCarthy, C.T., Lawlor, V.P., Stanley, W.F.: Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: part I–model development and validation. Compos. Struct. 71(2), 140–158 (2005)10.1016/j.compstruct.2004.09.024 ↗
24. McCarthy, C.T., McCarthy, M.A.: Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: Part II–effects of bolt-hole clearance. Compos. Struct. 71(2), 159–175 (2005)10.1016/j.compstruct.2004.09.023 ↗
25. Tserpes, K.I., Labeas, G., Papanikos, P., Kermanidis, T.: Strength prediction of bolted joints in graphite/epoxy composite laminates. Compos. B Eng. 33(7), 521–529 (2002)10.1016/S1359-8368(02)00033-1 ↗
26. Ger, G.S., Kawata, K., Itabashi, M.: Dynamic tensile strength of composite laminate joints fastened mechanically. Theor. Appl. Fract. Mech. 24(2), 147–155 (1996)10.1016/0167-8442(95)00038-0 ↗
27. Li, Q.M., Mines, R.A.W., Birch, R.S.: Static and dynamic behaviour of composite riveted joints in tension. Int. J. Mech. Sci. 43(7), 1591–1610 (2001)10.1016/S0020-7403(00)00099-0 ↗
28. Gunnion, A., Koerber, H., Elder, D., Thomson, R.: Development of Fastener Models for Impact Simulation of Composite Structures, in 25th Congress of the International Council of Aeronautical Sciences ICAS. Hamburg, Germany (2006)
29. Bornschlegel, T.: DLR, Private Communication—Experimentelle Untersuchung von Nieten in Verbundstrukturen unter Hochgeschwindigkeitsbelastungen (2007)
30. Koerber, H.: Pull-out and shear failure of bolted single lap joints in composite laminates, in Institut fur Flugzeugbau. Stuttgart University: Stuttgart, Germany (2006)
31. ASTM International, ASTM D 5961 / D 5961 M - 05—Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates (2005)
32. Pearce, G.M., Johnson, A.F., Thomson, R.S., Kelly, D.W.: High strain-rate response of fastened carbon fibre composite joints in composite structures, in ECCOMAS Thematic Conference on Mechanical Response of Composites. Porto, Portugal (2007)
33. Bornschegel, T.: In preparation—Experimentelle Untersuchung von Nieten in Verbundstrukturen unter Hochgeschwindigkeitsbelastungen (2007)
34. Crews, J.H. Jr.: Bolt-bearing fatigue of a carbon/epoxy laminate. In: Kedward, K.T. (ed.) Joining of Composite Materials, p. 131–144. American Society for Testing and Materials (1981)10.1520/STP33478S ↗
35. Collins, T.A.: The strength of bolted joints in multidirectional CFRP laminates. Composites 8, 43–55 (1977)10.1016/0010-4361(77)90027-1 ↗
36. Zhou, Y., Jiang, D., Xia, Y.: Tensile mechanical behavior of T300 and M40J fiber bundles at different strain rate. J. Mater. Sci. 36(4), 919–922 (2001)10.1023/A:1004803202658 ↗
37. Elder, D., Dorsamy, Y., Rheinfurth, M.: Failure of composite bonded joints at elevated strain rates, in Thirteenth Australian Aeronautical Conference. Melbourne (2009)
38. Sun, C., Thouless, M.D., Waas, A.M., Schroeder, J.A., Zavattieri, P.D.: Ductile-brittle transitions in the fracture of plastically-deforming, adhesively-bonded structures. Part I: experimental studies. Int. J. Solids Struct. 45(10), 3059–3073 (2008)10.1016/j.ijsolstr.2008.01.011 ↗
39. Sun, C.T., Han, C.: A method for testing interlaminar dynamic fracture toughness of polymeric composites. Compos. B Eng. 35(6–8), 647–655 (2004)10.1016/j.compositesb.2004.04.006 ↗
40. Huang, Y., Wang, W., Liu, C., Rosakis, A.J.: Analysis of intersonic crack growth in unidirectional fiber-reinforced composites. J. Mech. Phys. Solid 47(9), 1893–1916 (1999)10.1016/S0022-5096(98)00124-0 ↗
41. Dwivedi, S.K., Espinosa, H.D.: Modeling dynamic crack propagation in fiber reinforced composites including frictional effects. Mech. Mater. 35(3–6), 481–509 (2003)10.1016/S0167-6636(02)00266-1 ↗