Application of Interlaminar Tests to Marine Composites. A Literature Review
Source abstract
Abstract
This paper gives an overview of the characterization of the interlaminar properties of composites used for marine structures. Composites to be used in marine applications have particular requirements due to their environment, their large dimensions, mechanical loading and cost constraints. Under certain loading conditions (insert loading, impact) there is a risk of delamination as interlaminar strength of these materials is limited. This paper presents an overview of the tests available to measure delamination resistance. The parameters which influence this property, including the constituents (fibre, matrix, interface), specimen geometry, fabrication route and the resulting defects, and aging are reviewed here.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Material Properties and Processing · Structural Analysis of Composite Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Smith, C. S., Design of Marine Structures in Composite Materials, Elsevier Applied Science, London, 1990.
2. Heinz, D., Ritcher, B. and Weber, S., ‘Application of Advanced Materials for Ship Construction. Experience and Problems’, Materials and Corrosion 51, 2000, 40–412.10.1002/1521-4176(200006)51:6<407::AID-MACO407>3.0.CO;2-S ↗
3. Mouritz, A. P., Gellert, E., Burchill, P. and Challis, K., ‘Review of Advanced Composite Structures for Naval Ships and Submarines’, Composite Structures 53, 2001, 2–41.10.1016/S0263-8223(00)00175-6 ↗
4. Davies, P. and Petton, D., ‘An Experimental Study of Scale Effects in Marine Composites’, Composites Part A 30, 1999, 26–275.10.1016/S1359-835X(98)00156-0 ↗
5. Hellbratt, S. E., ‘Experiences from Design and Production of the 72m CFRP Sandwich Corvette Visby’, in Proc. 6th Int. Conf. on Sandwich Structures, March 2003, CRC Press, pp. 1–24.
6. Favre, J. P. and Vidal, G., ‘Effet de l’humidité sur la fatigue en cisaillement des composites unidirectionnels. Tentatives d'interprétation et bilan’, Comptes rendus des troisièmes journées Nationales sur les Composites. JNC 3, Paris, 2–23 sept. 1982, 6–75.
7. Mouritz, A. P., Leong, K. M. and Herszberg, I., ‘A Review of the Effect of Stitching on the In-Plane Mechanical Properties of Fibre-Reinforced Polymer Composites’, Composites Part A 28, 1997, 97–991.10.1016/S1359-835X(97)00057-2 ↗
8. Kim, W. C. and Dharan, C. K. H., ‘Analysis of Five-Point Bending for Determination of the Interlaminar Shear Strength of Unidirectional Composite Materials’, Composite Structures 30, 1995, 24–251.10.1016/0263-8223(94)00015-8 ↗
9. Kim, J. K. and Sham, M. L., ‘Impact and Delamination Failure of Woven-Fabric Composites’, Composites Science and Technology 60, 2000, 74–761.10.1016/S0266-3538(99)00166-9 ↗
10. Asp, L. E., ‘The Effects of Moisture and Temperature on the Interlaminar Delamination Toughness of a Carbon/Epoxy Composite’, Composites Science and Technology 58, 1998, 96–977.10.1016/S0266-3538(97)00222-4 ↗
11. Sellars, F. H., ‘Water Impact Loads’, Marine Technology 13(1), 1976, 4–58.
12. Parga-Landa, B., Vlegels, S., Hernadez-Olivare, F. and Clark, S. D., ‘Analytical Simulation of Stress Wave Propagation in Composite Materials’, Composite Structures 45, 1999, 12–129.10.1016/S0263-8223(99)00015-X ↗
13. Hildebrand, M., ‘Improving the Strength of Boat Laminates’, in Nautical Construction with Composite Materials, Ifremer, Paris –9 December 1992, Conference Proceedings no 15, pp. 21–223.
14. Kessler, A. and Bledzki, A., ‘Correlation between Interphase-Relevant Tests and the Impact-Damage Resistance of Glass/Epoxy Laminates with Different Fibre Surface Treatments’, Composites Science and Technology 60, 2000, 12–130.10.1016/S0266-3538(99)00105-0 ↗
15. Sjögren, B. A. and Berglund, L. A., ‘The Effects of Matrix and Interface on Damage in GRP Cross-Ply Laminates’, Composites Science and Technology 60, 2000, –21.10.1016/S0266-3538(99)00096-2 ↗
16. Parga-Landa, B., Vlegels, S., Hernadez-Olivare, F. and Clark, S. D., ‘An Analytical Study of the Effect of Slamming Pressures on the Interlaminar Behaviour of Composite Panels’, Composite Structures 46, 1999, 35–365.10.1016/S0263-8223(99)00100-2 ↗
17. Chang, F. K., Tang, J. M. and Peterson, D. G., ‘The Effect of Testing Methods on the Shear Strength Distribution in Laminated Composites’, Journal of Reinforced Plastics and Composites 6, 1987, 30–318.10.1177/073168448700600401 ↗
18. Deng, S. and Ye, L., ‘Influence of Fiber-Matrix Adhesion on Mechanical Properties of Graphite/Epoxy Composites: II Interlaminar Fracture and Inplane Shear Behavior’, Journal of Reinforced Plastics and Composites 18(11), 1999, 104–1057.10.1177/073168449901801106 ↗
19. Mouritz, A. P., Gallagher, J. and Goodwin, A. A., ‘Flexural Strength and Interlaminar Shear Strength of Stitched GRP Laminates Following Repeated Impact’, Composites Science and Technology 87, 1997, 50–522.10.1016/S0266-3538(96)00164-9 ↗
20. Iosipescu, N., ‘New Accurate Procedure for Single Shear Testing of Metals’, Journal of Materials 2(3), 1967, 53–566.
21. Roudet, F., ‘Comportement en flexion trois points avec cisaillement préponderant de composites verre/epoxyde unidirectionnels: sous chargement monotone et cyclique’, Thèse de doctorat, Université des Sciences et Technologies de Lille, France, 1998.
22. Pierron, F. and Vautrin, A., ‘The 10° Off-Axis Tensile Test: A Critical Approach’, Composites Science and Technology 56(4), 1996, 48–488.10.1016/0266-3538(96)00004-8 ↗
23. Pierron, F. and Vautrin, A., ‘Measurement of the In-Plane Shear Strengths of Unidirectional Composites with the Iosipescu Test’, Composites Science and Technology 57(12), 165–1660.10.1016/S0266-3538(97)00099-7 ↗
24. Hassaïni, D., ‘Etude numérique et expérimentale du comportement monotone et cyclique en cisaillement inter-et intralaminaire du composite unidirectionnel verre/epoxy’, Thèse École Centrale de Lille, France, 7 juillet 1998.
25. Roselli, F. and Santare, M. H., ‘Comparison of the Short Beam Shear (SBS) and Interlaminar Shear Device (ISD) Tests’, Composites Part A 28, 1997, 58–594.10.1016/S1359-835X(97)00009-2 ↗
26. Williams, J. C., Yurgartis, S.W. and Moosbrugger, J. C., ‘Interlaminar Shear Fatigue Damage Evolution of 2-D Carbon-Carbon Composites’, Journal of Composite Materials 30(7), 1996, 78–799.10.1177/002199839603000702 ↗
27. Hoecker, F., Friedrich, K., Blumberg, H. and Karger-Kocsis, J., ‘Effects of Fiber/Matrix Adhesion on Off-Axis Mechanical Reponse in Carbon-Fiber/Epoxy-Resin Composites’, Composites Science and Technology 54, 1995, 31–327.10.1016/0266-3538(95)00058-5 ↗
28. Herrera-Franco, P., Wu, W. L., Madhukar, M. and Drazl, L. T., ‘Contemporary Methods for Measurement of Fiber-Matrix Interfacial Shear Strength’, 46th Annual Conference, Composite Institute, The Society of the Plastics Industry, Inc., February 1–21, 1991, Session 14B/1-6.
29. Bagueri, M., ‘The Three-Point Bending Test, a Critical Review’, in Proceeding of the 8th Japan-US Conference on Composite Materials (Baltimore), Ed. Technomic Publ., 1998, pp. 68–692.
30. Short, S. R., ‘Characterization of Interlaminar Shear Failure of Graphite/Epoxy Composite Materials’, Composites 26, 1995, 43–449.10.1016/0010-4361(95)90916-N ↗
31. Davies, P., Pomiès, F. and Carlsson, L. A., ‘Influence of Water and Accelerated Ageing on the Shear Fracture Properties of Glass/Epoxy Composite’, Applied Composite Materials 3, 1996, 7–87.10.1007/BF00158994 ↗
32. Bouette, B., Cazeneuve, C. and Oytana, C., ‘Effect of Strain Rate on Interlaminar Shear Properties of Carbon/Epoxy Composites’, Composites Science and Technology 45, 1992, 31–321.10.1016/0266-3538(92)90046-6 ↗
33. Wisnom, M. R., Petrossian, Z. J. and Jones, M. I., ‘Interlaminar Failure of Unidirectional Glass/Epoxy Due to Combined Through Thickness Shear and Tension’, Composites Part A 27, 1996, 92–929.10.1016/1359-835X(96)00038-3 ↗
34. Martin, R. H., ‘Delamination Failure in a Unidirectional Curved Composite LaminateL-Specimen’, in Composite Materials: Testing and Design (Tenth volume), ASTM STP 1120, 1992, pp. 36–383.10.1520/STP20170S ↗
35. Davies, P., Blackman, B. R. K. and Brunner, A. J., ‘Standard Test Methods for Delamination Resistance of Composite Materials: Current Status’, Applied Camposite Materials 5, 1998, 34–364.10.1023/A:1008869811626 ↗
36. Moore, D. R., Pavan, A. and Williams, J. G., Fracture Mechanics Testing Methods for Polymers, Adhesives and Composites, ESIS Publication 28, Elsevier, 2001.
37. Davies, P., Sims, G. D. et al., ‘Comparison of Test Configurations for Determination of Mode II Interlaminar Fracture Toughness, Results from International Collaborative Test Programme’, Plastics, Rubber & Composites 28(9), 1999, 43–437.10.1179/146580199101540600 ↗
38. Lee, S. M., ‘An Edge Crack Torsion Method for Mode III Delamination Fracture Testing’, Journal of Composite Technology Research 15, 1993, 19–201.10.1520/CTR10369J ↗
39. Griffith, A. A., ‘The Phenomenon of Rupture and Flow in Solids’, Philosophical Transactions of the Royal Society of London 221a, 1920, 16–198.
40. Wisnom, M. R., ‘Size Effects in Tensile, Compressive and Interlaminar Failure of Unidirectional Composites’, Proceedings of ASME Aerospace Division AD-Vol. 55, 1997, 6–77.
41. Wisnom, M. R., ‘Size Effects in the Testing of Fibre-Composite Materials’, Composites Science and Technology 59, 1999, 193–1957.10.1016/S0266-3538(99)00053-6 ↗
42. Cui, W. and Wisnom, R., ‘Size Effects in Interlaminar Shear Failure for Different Specimen Geometries’, in 2nd International Conference on Deformation and Fracture of Composite, Institute of Materials, 1993, pp. 9/–10.
43. Sutherland, L. S., Shenoi, R. A. and Lewis, S. M., ‘Size and Scale Effects in Composites: I. Literature Review’, Composites Science and Technology 59(2), 1999, 20–220.10.1016/S0266-3538(98)00065-7 ↗
44. Brelant, S. and Pekter, I., ‘Fabrication and Environmental Interaction of Filament - Wound Composites’, in Mechanics of Composites Materials, F. W. Wendt, H. Liebowitz and Perrone (eds), Pergamon Press, Oxford, 1970, pp. 79–812.10.1016/B978-0-08-006421-5.50043-5 ↗
45. Tucker, R., Compston, P. and Jar, P. Y. B., ‘The Effect of Post-Cure Duration on the Mode I Interlaminar Fracture Toughness of Glass-Fibre Reinforced Vinylester’, Composites Part A 32, 2001, 12–134.10.1016/S1359-835X(00)00116-0 ↗
46. Skrifvard, M., Berglund, L. and Ericson, M., ‘Microscopy of the Morphology in Low Stryrene Emission Glass Fiber/Unsaturated Polyester Laminates’, Journal of Applied Polymer Science 71, 1999, 155–1562.10.1002/(SICI)1097-4628(19990307)71:10<1555::AID-APP3>3.0.CO;2-C ↗
47. Gutierrez, J., Le Lay, F. and Hoarau, P. A., ‘A Study of the Aging of Glass Fibre-Resin Composites in a Marine Environment’, in Nautical Construction with Composite Materials, Ifremer, Paris, –9 December 1992, Conference Proceedings no15, pp. 33–346.
48. Spinger, G. S., Sanders, B. A. and Tung, R., ‘Environmental Effects on Glass Fiber Reinforced Polyester and Vinylester Composites’, Journal of Composite Materials 80(14), 1980, 21– 232.10.1177/002199838001400304 ↗
49. Young, R. E., ‘Vinyl Ester Resins’, in Unsaturated Polyester Technology, P. K. Mallich (ed.), Marcel Dekker Inc., New York, 1997, pp. 31–420.
50. Compston, P. and Jar, P. Y. B., ‘The Influence of Fibre Volume Fraction on the Mode I Interlaminar Fracture Toughness of a Glass-Fibre/Vinylester Composite’, Applied Composite Materials 6, 1999, 35–368.10.1023/A:1008973211347 ↗
51. St John, N. A. and Brown, J. R., ‘Flexural and Interlaminar Shear Properties of Glass-Reinforced Phenolic Composites’, Composites Part A 29, 1998, 93–946.10.1016/S1359-835X(98)00019-0 ↗
52. Falconnet, D., Bourban, P. E., Pandita, S., Manson, J. A. E. and Verpoest, I., ‘Fracture Toughness of Weft-Knitted Fabric Composites’, Composites Part A 33, 2002, 57–588.10.1016/S1359-8368(02)00053-7 ↗
53. Verpoest, I., Gommers, B., Huysmans, G., Ivens, J., Luo, Y., Pandita, S. and Philips, D., ‘The Potential of Knitted Fabrics as a Reinforcement for Composites’, Proceedings ICCM-11, 1– 18 July 1997, 1-10–33.
54. Martin, R. H., ‘Delamination Characterisation of Woven Glass/Polyester Composites’, Journal Composite Technology Research 19(1), 1997, 2–28.10.1520/CTR10010J ↗
55. Alif, N., Carlsson, L. A. and Gillespie, J., ‘Mode I, Mode II and Mixed Mode Interlaminar Fracture of Woven Fabric Carbon/Epoxy’, ASTM STP 1997, 1242: 82.
56. Suppakul, P. and Bandyopadhyay, S., ‘The Effect of Weave Pattern on theMode I Interlaminar Fracture Energy of E Glass/Vinylester Composites’, Composites Science and Technology 62, 2002, 70–717.10.1016/S0266-3538(01)00220-2 ↗
57. Alif, N., Carlsson, L. A. and Boogh, L., ‘The Effect of Weave Pattern and Crack Propagation Direction on Mode I Delamination Resistance of Woven Glass and Carbon Composites’, Composites Part B 29(5), 1998, 60–611.10.1016/S1359-8368(98)00014-6 ↗
58. Guess, T. R. and Reedy, E. D., ‘Comparison of Interlocked Fabric and Laminated Fabric Kevlar 49/Epoxy Composites’, Journal Composite Technology Research 1(4), 1985, 136.
59. Cartié, D. D. R and Partridge, I. K., ‘Delamination Behaviour of Z-Pinned Laminates’, in Proceedings ESIS Conference on Fracture of Polymers, Composites and Adhesives, ESIS Publication
60. J. G. Williams and A. Pavan (eds), Elsevier, Oxford, 2000, pp. 2–36, Proceedings of 2nd ESIS TC4 Conference (Les Diablerets, Switzerland, 1–15 September 1999).
61. Keusch, S. and Haessler, R., ‘Influence of Surface Treatment of Glass Fibres on the Dynamic Mechanical Properties of Resin Composites’, Composites Part A 30, 1999, 99–1002.10.1016/S1359-835X(99)00007-X ↗
62. Keusch, S., Queck, H. and Gliesche, K., ‘Influence of Glass Fibre/Epoxy Resin Interface on Static Mechanical Properties of Unidirectional Composites and on Fatigue Performance of Cross Ply Composites’, Composites Part A 29, 1998, 70–705.10.1016/S1359-835X(97)00106-1 ↗
63. Piggott, M. R., ‘Why Interface Testing by Single-Fibre Methods Can Be Misleading’, Composite Science and Technology 57, 1997, 96–974.10.1016/S0266-3538(97)00036-5 ↗
64. Ramanathan, T., Bismarck, A., Schultz, E. and Subramanian, K., ‘Investigation of the Influence of Acidic and Basic Surface Groups on Carbon Fibres on the Interfacial Shear Strength in an Epoxy Matrix by Means of Single-Fibre Pull-Out Test’, Composite Science and Technology 61, 2001, 59–605.10.1016/S0266-3538(00)00239-6 ↗
65. Drzal, L. T., Sugiura, N. and Hook, D., ‘The Role of Chemical Bonding and Surface Topography in Adhesion between Carbon Fibers and Epoxy Matrices’, Composite Interfaces 4, 1997, 33–354.10.1163/156855497X00073 ↗
66. Jacobasch, H. J., Grundke, K., Uhlmann, P., Simon, F. and Mäder, E., ‘Comparison of Surface-Chemical Methods for Characterizing Fiber-Epoxy Resin Composites’, Composite Interfaces 3, 1996, 29–320.10.1163/156855495X00093 ↗
67. Liu, F. P., Wolcott, M. P., Gardner, D. J. and Rials, T. G., ‘Characterization of the Interface between Cellulosic Fibers and a Thermoplastic Matrix’, Composite Interfaces 2, 1994, 41– 432.10.1163/156855494X00319 ↗
68. Wagner, H. D., Gallis, H. E. and Wiesel, E., ‘Study of the Interface in Kevlar 49-Epoxy Composites by Means of Microbond and Fragmentation Tests: Effects of Materials and Testing Variables’, Journal of Materials Science 28, 1993, 223–2244.10.1007/BF00367590 ↗
69. Nardin, M., Asloun, E. M. and Schultz, J., ‘Physico-Chemical Interactions between Carbon Fibers and PEEK’, in Controlled Interfaces in Composite Materials, H. Ishida (ed.), Elsevier, New York, 1990, pp. 28–293.
70. Nardin, M. and Schultz, J., ‘Relationship between Fibre-Matrix Adhesion and the Interfacial Shear Strength in Polymer-Based Composites’, Composite Interfaces 1, 1993, 17–192.10.1163/156855493X00068 ↗
71. Nardin, M. and Schultz J., ‘Relations between Work of Adhesion and Equilibrium Interatomic Distance at the Interface’, Langmuir 12, 1996, 423–4242.10.1021/la9602168 ↗
72. Pisanova, E., and Mader, E., ‘Acid-Base Interactions and Covalent Bonding at a Fiber-Matrix Interface: Contribution to the Work of Adhesion and Measured Adhesion Strength’, Journal of Adhesion Science Technol. 14(3), 2000, 41–436.10.1163/156856100742681 ↗
73. Shen, W. and Parker, I. H., ‘Surface Composition and Surface Energetics of Various Eucalypt Pulps’, Cellulose 6, 1999, 4–55.10.1023/A:1009268102404 ↗
74. Rield, B. and Kamdem, P. O., ‘Estimation of the Dispersive Component of Surface Energy of Polymer-Grafted Lignocellulosic Fibers with Inverse Gas Chromatography’, Journal of Adhesion Science Technol. 6(9), 1992, 105–1067.10.1163/156856192X00935 ↗
75. Harkins, W. D., ‘Surface Energy and the Orientation of Molecules in Surfaces as Revealed by Surface Energy Relations’, Z. Phys. Chem. 139, 1928, 64–691.10.1515/zpch-1928-13941 ↗
76. Mäder, E., Grundke, K., Jacobash, H. J. and Wachinger, G., ‘Surface, Interphase and Composite Property Relations in Fibre-Reinforced Polymers’, Composites 25(7), 1994, 73–744.10.1016/0010-4361(94)90209-7 ↗
77. Bismarck, A., Richter, D., Wuertz, C. and Springer, J., ‘Basic and Acidic Surface Oxides on Carbon Fiber and Their Influence on the Expected Adhesion to Polyamide’, Colloids Surfaces A 159, 1999, 34–350.10.1016/S0927-7757(99)00262-9 ↗
78. Park, S. J. and Kim, T. J., ‘Studies on Surface Energetics of Glass Fabrics in a Unsaturated Polyester Matrix System: Effect of Sizing Treatment on Glass Fabrics’, Journal of Applied Polymer Science 80, 2001, 143–1445.10.1002/app.1234 ↗
79. Wlodarski, J. F. and Robertson, L. E., ‘Effect of Fabrication Processes on Composite Material Properties’, American Institute of Aeronautics and Astronautics AIAA 97-1325, 1997, 115– 1165.
80. Abraham, D., Matthews, S. and Mcllhagger, R., ‘A Comparison of Physical Properties of Glass Fibre Epoxy Composites Produced by Wet Lay-Up with Autoclave Consolidation and Resin Transfer Moulding’, Composites Part A 29, 1998, 79–801.10.1016/S1359-835X(98)00055-4 ↗
81. Olivier, P., Cottu, J. P. and Ferret, B., ‘Effects of Cure Cycle Pressure and Voids on Some Mechanical Properties of Carbon/Epoxy Laminates’, Composites 26, 1995, 50–515.10.1016/0010-4361(95)96808-J ↗
82. Kang, M. K., Lee, W. I. and Hahn, H. T., ‘Analysis of Vacuum Bag Resin Transfer Molding Process’, Composites Part A 32, 2001, 155–1560.10.1016/S1359-835X(01)00012-4 ↗
83. Sevostianov, I. B., Verijenko, V. E., Von Klemperer, C. J. and Chevallereau, B., ‘Mathematical Model of Stress Formation During Vacuum Resin Infusion Process’, Composites Part B 30, 1999, 51–521.10.1016/S1359-8368(99)00012-8 ↗
84. Pearce, N. R. L., Guild, F. J. and Summerscalesn, J., ‘An Investigation into the Effects of Fabric Architecture on the Processing and Properties of Fibre Reinforced Composites Produced by Resin Transfer Moulding’, Composites Part A 29, 1998, 1–27.10.1016/S1359-835X(97)00028-6 ↗
85. Labat, L., Bréard, J., Pillut-Lesavre, S. and Bouquet, G., ‘Void Fraction Prevision in LCM Parts’, European Physical Journal - Applied Physics 16(2), 2001, 26–279.10.1051/epjap:2001104 ↗
86. Lee, C. L. and Wei, K. H., ‘Effect of Material and Process Variables on the Performance of Resin-Transfer-Molded Epoxy Fabric Composites’, Journal of Applied Polymer Science 77, 2000, 214–2155.10.1002/1097-4628(20000906)77:10<2149::AID-APP7>3.0.CO;2-J ↗
87. Luo, Y., Verpoest, I., Hoes, K., Vanheule, M., Sol, H. and Cardon, A., ‘Permeability Measurement of Textile Reinforcements with Several Test Fluids’, Composites Part A 32(10), 2001, 149–1504.10.1016/S1359-835X(01)00049-5 ↗
88. Lekakou, C. and Bader, M. G., ‘Mathematical Modelling of Macro-and Micro-Infiltration in Resin Transfer Moulding (RTM)’, Composites Part A 29, 1998, 2–37.10.1016/S1359-835X(97)00030-4 ↗
89. Amico, S. and Lekakou, C., ‘An Experimental Study of the Permeability and Capillary Pressure in Resin-Transfer Moulding’, Composites Science and Technology 61, 2001, 194–1959.10.1016/S0266-3538(01)00104-X ↗
90. Bradley, W. L. and Grant, T. S., ‘The Effect of the Moisture Absorption on the Interfacial Strength of Polymeric Matrix Composites’, Journal of Materials Science 30, 1995, 553– 5542.10.1007/BF00351570 ↗
91. Bowles, K. J. and Frimpong, S., ‘Void Effects on the Interlaminar Shear Strength of Unidirectional Graphite-Fiber-Reinforced Composites’, Journal of Composite Materials 26(10), 1991, 148–1509.10.1177/002199839202601006 ↗
92. Kaw, K., Mechanics of Composite Materials, CRC Press, New York, 1997.
93. Greszczuk, L. B., ‘Effect of Voids on Strength Properties of Filamentary Composites’, Paper presented at 22nd Annual Meeting of the Reinforced Plastics Division, Society of the Plastics Industry, Washington DC, 1967, 20A1–20A10.
94. Costa, M. L., D'Almeida, S. F. M. and Rezende, M. C., ‘The Influence of Porosity on the Interlaminar Shear Strength of Carbon/Epoxy and Carbon/Bismaleimide Fabric Laminates’, Composites Science and Technology 61, 2001, 210–2108.10.1016/S0266-3538(01)00157-9 ↗
95. Wisnom, M. R., Reynolds, T. and Gwilliam, N., ‘Reduction in Interlaminar Shear Strength by Discrete and Distibuted Voids’, Composites Science and Technology 56, 1996, 9–101.10.1016/0266-3538(95)00128-X ↗
96. Wu, Y., Shivpuri, R. and Lee, L. J., ‘Effects of Macro and Micro Voids on Elastic Properties of Polymer Composites’, Journal of Reinforced Plastics and Composites 17(15), 1998, 139– 1402.10.1177/073168449801701507 ↗
97. Hancox, N. L., ‘The Effects of Flaws and Voids on the Shear Properties of CFRP’, Journal of Materials Science 12, 1977, 88–892.10.1007/BF00540969 ↗
98. Ghiorse, S. R., ‘Effect of Void Content on the Mechanical Properties of Carbon/Epoxy Laminates’, SAMPE Quarterly, Jan. 1993, 5–59.
99. Krawczak, P. and Pabiot, J., ‘La mesure des porosités dans les composites industriels et leur incidence sur les propriétés mécaniques’, Composites 3, 1991, 29–295.
100. Yoshida, H., Ogasa, T. and Hayashi, R., ‘Statistical Approach to the Relationship between ILSS and Void Content of CFRP’, Composites Science and Technology 25, 1986, –16.10.1016/0266-3538(86)90018-7 ↗