Properties of Wood Fibre-Polypropylene Composites: Effect of Wood Fibre Source
Source abstract
Abstract
This study examined the effect of type of wood fibre source on the physical and mechanical properties of wood fibre-polypropylene composites. Wood flour, fibres of heat-treated wood and pellets were used as sources of wood fibres in the manufacturing process. All studied wood fibre-polypropylene composites were made from 75% wood, 22% recycled polypropylene (PP) and 3% maleated polypropylene (MAPP). Wood fibre-polypropylene composites were compounded in a conical twin-screw extruder. Water absorption and thickness swelling were studied. Mechanical properties of the composites were characterised by tensile, flexural, and impact testing. Micromechanical deformation processes were investigated using scanning electron microscopy done on the fractured surfaces of broken samples. The durability of composites exposed to three accelerated cycles of water immersion, freezing and thawing was examined. The results showed that the density of the composites was a key factor governing water absorption and thickness swelling. A significant improvement in tensile strength, flexural strength, and Charpy impact strength was observed for composites reinforced with heat-treated fibre compared to composites reinforced with pellets and especially to wood flour reinforced composites. The flexural strength and dimensional stability performance reduced after exposure to freeze-thaw cycling for all composites, but the degree of these changes was dependent on the wood fibre source.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Wood Treatment and Properties · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Bledzki, A.K., Faruk, O.: Wood fibre reinforced polypropylene composites: effect of fibre geometry and coupling agent on physico-mechanical properties. Appl. Comp. Mat. 10, 365–379 (2003)10.1023/A:1025741100628 ↗
2. Klyosov, A.A.: Wood–plastic composites, p. 698. Wiley, New Jersey (2007)10.1002/9780470165935 ↗
3. Li, T.G., Wolcott, M.P.: Rheology of wood plastics melt. Part 2: effects of lubricating systems in HDPE/maple composites. Polym. Eng. Sci. 46, 464–473 (2006)10.1002/pen.20505 ↗
4. Wu, J., Yu, D., Chan, C.-M., Kim, J., Mai, Y.-W.: Effect of fiber pretreatment condition on the interfacial strength and mechanical properties of wood fiber/PP composites. J. Appl. Polym. Sci. 76, 1000–1010 (2000)10.1002/(SICI)1097-4628(20000516)76:7<1000::AID-APP3>3.0.CO;2-X ↗
5. Sombatsompop, N., Chaochanchaikul, K.: Effect of moisture content on mechanical properties, thermal and structural stability and extrudate texture of poly(vinyl chloride)/wood sawdust composites. Polym. Int. 53, 1210–1218 (2004)10.1002/pi.1535 ↗
6. Oksman, K., Clemons, C.: Mechanical properties and morphology of impact modified polypropylene-wood flour composites. J. Appl. Polym. Sci. 67, 1503–1513 (1998)10.1002/(SICI)1097-4628(19980228)67:9<1503::AID-APP1>3.0.CO;2-H ↗
7. Danyadi, L., Janecska, T., Szabo, Z., Nagy, G., Moczo, J., Pukanszky, B.: Wood flour filled PP composites: compatibilization and adhesion. Compos. Sci. Technol. 67, 2838–2846 (2007)10.1016/j.compscitech.2007.01.024 ↗
8. Bledzki, A.K., Letman, M., Viksne, A., Rence, L.: A comparison of compounding process and wood type of wood fibre –PP composites. Composites Part A 36, 789–797 (2005)10.1016/j.compositesa.2004.10.029 ↗
9. Selke, S.E., Wichman, I.: Wood fibre/polyolefin composites. Composites Part A 35, 321–326 (2004)10.1016/j.compositesa.2003.09.010 ↗
10. Ichazo, M.N., Albano, C., Gonzalez, G., Perera, R., Candal, M.V.: Polypropylene/wood flour composites: treatments and properties. Compos. Struct. 54, 207–214 (2001)10.1016/S0263-8223(01)00089-7 ↗
11. Korkut, D.S., Korkut, S., Bekar, I., Budakçi, M., Dilik, T., Çakicier, N.: The effects of heat treatment on the physical properties and surface roughness of Turkish hazel (Corylus colurna L.) wood. Int. J. Mol. Sci. 9, 1772–1783 (2008)10.3390/ijms9091772 ↗
12. ThermoWood Handbook, Finnish ThermoWood Association, Helsinki (2003)
13. Stamboulis, A., Baillie, C.A., Garkhail, S.K., van Melick, H.G.H., Peijs, T.: Environmental durability of flax fibres and their composites based on polypropylene matrix. Appl. Comp. Mat. 7, 273–294 (2000)10.1023/A:1026581922221 ↗
14. Shi, S.Q., Gardner, D.J.: Hydroscopic thickness swelling rate of compression moulded wood fibreboard and wood fibre/polymer composites. Composites Part A 37, 1276–1285 (2006)10.1016/j.compositesa.2005.08.015 ↗
15. Rowell, R.M., Ibach, R.E., McSweeny, J., Nilsson, T.: Understanding decay resistance, dimensional stability and strength changes in heat treated and acetylated wood. In: Proceedings of the European Conference on Wood Modification, pp. 489–502. Stockholm, Sweden, (2009)
16. Nielsen, L.E.: Mechanical properties of polymers and composites, 2nd Vol., p. 556. Marcel Dekker, New York (1974)
17. Hristov, V.N., Krumova, M., Vasileva, St, Michler, G.H.: Modified polypropylene wood flour composites. Fracture, deformation and mechanical properties. J. Appl. Polym. Sci. 92, 1286–1292 (2004)10.1002/app.20081 ↗
18. Nygård, P., Tanem, B.S., Karlsen, T., Brachet, P., Leinsvang, B.: Extrusion-based wood fibre-PP composites: wood powder and pelletized wood fibres—a comparative study. Compos. Sci. Technol. 68, 3418–3424 (2008)10.1016/j.compscitech.2008.09.029 ↗
19. Migneault, S., Koubaa, A., Erchiqui, F., Chaala, A., Englund, K., Krause, C., Wolcott, M.: Effect of fibre length on processing and properties of extruded wood-fibre/HDPE composite. J. Appl. Polym. Sci. 110, 1085–1092 (2008)10.1002/app.28720 ↗