Design, Manufacture, and Cryogenic Testing of a Linerless Composite Tank for Liquid Hydrogen
Source abstract
Abstract
Abstract This paper describes design, manufacture, and testing of a linerless composite vessel for liquid hydrogen, having 0.3 m diameter and 0.9 m length. The vessel consists of a composite cylinder manufactured by wet filament winding of thin-ply composite bands, bonded to titanium end caps produced by additive manufacturing. The aim was to demonstrate the linerless design concept with a thin-ply composite for the cylinder. The investigation is limited to the internal pressure vessel, while real cryogenic tanks also involve an outer vessel containing vacuum for thermal insulation. Thermal stresses dominate during normal operation (4 bar) and the layup was selected for equal hoop strains in the composite cylinder and end caps during filling with liquid hydrogen. Two vessels were tested in 20 cycles, by filling and emptying with liquid nitrogen to 4 bar, without signs of damage or leakage. Subsequently, one vessel was tested until burst at almost 30 bar.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Spacecraft and Cryogenic Technologies · Nuclear and radioactivity studies · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Sloop, J.L: Liquid hydrogen as a propulsion fuel, 1945–1959. NASA SP-4404. NASA, Washington DC (1978). https://ntrs.nasa.gov/api/citations/19980019295/downloads/19980019295.pdf
2. Air, A., Shamsuddoha, M., Prusty, B.G.: A review of Type V composite pressure vessels and automated fibre placement based manufacturing. Compos. B 253, 1110573 (2023). https://doi.org/10.1016/j.compositesb.2023.11057310.1016/j.compositesb.2023.110573 ↗
3. Zheng, H., Zeng, H., Zhang, J., Sun, H.: The application of carbon fiber composites in cryotank. In: Ares, A.E. (ed.) Ch. 5 in solidification. IntechOpen (2018). https://doi.org/10.5772/intechopen.73127. https://www.intechopen.com/chapters/5897010.5772/intechopen.73127 ↗
4. Liu, N., Ma, B., Liu, F., Huang, W., Xu, B., Qu, L., Yang, Y.: Progress in research on composite cryogenic propellant tank for large aerospace vehicles. Compos. A 143, 106297 (2021). https://doi.org/10.1016/j.compositesa.2021.10629710.1016/j.compositesa.2021.106297 ↗
5. McCarville, D.A., Guzman, J.C., Dillon, A.K., Jackson, J.R., Birkland, J.O.: Design, manufacture and test of cryotank components. In: Comprehensive composite materials II, 2nd edn. Elsevier, Amsterdam Netherlands (2018). https://doi.org/10.1016/B978-0-12-803581-8.09958-610.1016/B978-0-12-803581-8.09958-6 ↗
6. Morimoto, T., Ishikawa, T., Yokozeki, T., Hayashi, Y., Shimoda, T., Morino, Y.: Pressurization test on CFRP liner-less tanks at liquefied nitrogen temperature. Adv. Compos. Mater. 13, 81–88 (2004). https://doi.org/10.1163/156855104171806210.1163/1568551041718062 ↗
7. Dvorak, G.J., Laws, N.: Analysis of progressive cracking in composite laminates II. First ply failure. J Compos Mater. 21, 309–329 (1987). https://doi.org/10.1177/00219983870210040210.1177/002199838702100402 ↗
8. Camanho, P.P., Dávila, C.G., Pinho, S.T., Iannucci, L., Robinson, P.: Prediction of in situ strengths and matrix cracking in composites under transverse tension and in-plane shear. Compos. A 37, 165–176 (2006). https://doi.org/10.1016/j.compositesa.2005.04.02310.1016/j.compositesa.2005.04.023 ↗
9. Olsson, R.: In-situ strength of composite plies – theory and experiments. TR12-001. Swerea SICOMP AB, Mölndal (2012). https://www.researchgate.net/publication/349694177_In-situ_strength_of_composite_plies_-_theory_and_experiments
10. Amacher, R., Cugnoni, J., Botsis, J., Sorensen, L., Smith, W., Dransfeld, C.: Thin ply composites: experimental characterization and modeling of size-effects. Compos. Sci. Technol. 101, 121–132 (2014). https://doi.org/10.1016/j.compscitech.2014.06.02710.1016/j.compscitech.2014.06.027 ↗
11. Cugnoni, J., Amacher, R., Kohler, S., Brunner, J., Kramer, E., Dransfeld, C., Smith, W., Scobbie, K., Sorensen, L., Botsis, J.: Towards aerospace thin-ply composites: effect of ply thickness, fibre, matrix and interlayer toughening on strength and damage tolerance. Compos. Sci. Technol. 168, 467–477 (2018). https://doi.org/10.1016/j.compscitech.2018.08.03710.1016/j.compscitech.2018.08.037 ↗
12. Marklund, E., Asp, L.E., Olsson, R., Ohlsson, F., Varna, J.: Experimental investigation and modeling of thin band woven composites. TexComp-11. Leuven, 2013. “Asp TexComp 11 paper.pdf”. https://www.mtm.kuleuven.be/english/research/scalint/cmg/events/CompositesWeek/program/papers/19-20-09-thursday-friday-texcomp-11.zip
13. Sippel, M., Kopp, A., Mattsson, D., Freund, J., Tapeinos, I., Koussios, S.: Final results of advanced cryo-tanks research project CHATT. 6th European Conf. for Aeronautics and Space Sciences (EUCASS) (2015). https://core.ac.uk/download/pdf/31022252.pdf
14. Katsivalis, I., Singorini, V., Ohlsson, F., Langhammer, C., Minelli, C., Asp, L.E.: Hydrogen permeability of thin-ply composites after mechanical loading. Compos. A 176, 107867 (2024). https://doi.org/10.1016/j.compositesa.2023.10786710.1016/j.compositesa.2023.107867 ↗
15. Merzkirch, M., Marklund, E., Olsson, R., Ramantani, D.: Mechanical characterization at room and cryogenic temperature of thin-ply CFRP laminates manufactured by filament winding. Submitted for publication. (2023)
16. 3M.: Scotch-Weld™ Epoxy Adhesive 2216 B/A. Technical data 2018. 3M Industrial Adhesives and Tapes Division, St Paul MN, USA (2018). https://multimedia.3m.com/mws/media/153955O/3mtm-scotch-weldtm-epoxy-adhesive-2216-b-a.pdf
17. Marquardt, E.D., Le, J.P., Radebaugh, R.: Cryogenic material properties database. Proc of the 11th International Cryocooler Conference, June 20–22, 2000, Keystone, CO. https://trc.nist.gov/cryogenics/Papers/Material_Properties/2000-Cryogenic_Material_Properties_Database.pdf
18. Sápi, Z., Butler, R.: Properties of cryogenic and low temperature composite materials – a review. Cryogenics 111, 103190 (2020). https://doi.org/10.1016/j.cryogenics.2020.10319010.1016/j.cryogenics.2020.103190 ↗
19. Hohe, J., Neubrand, A., Fliegener, S., Beckmann, C., Schober, M., Weiss, W.P., Appel, S.: Performance of fiber reinforced materials under cryogenic conditions - a review. Compos. A 141, 106226 (2021). https://doi.org/10.1016/j.compositesa.2020.10622610.1016/j.compositesa.2020.106226 ↗