journal article·2012-11Open access

Two-dimensional discrete element modelling of bender element tests on an idealised granular material

J. O’Donovan, C. O’Sullivan, G. Marketos

Granular Matter· Volume 14· Issue 6

Abstract

The small-strain (elastic) shear stiffness of soil is an important parameter in geotechnics. It is required as an input parameter to predict deformations and to carry out site response analysis to predict levels of shaking during earthquakes. Bender element testing is often used in experimental soil mechanics to determine the shear (S-) wave velocity in a given soil and hence the shear stiffness. In a bender element test a small perturbation is input at a point source and the propagation of the perturbation through the system is measured at a single measurement point. The mechanics and dynamics of the system response are non-trivial, complicating interpretation of the measured signal. This paper presents the results of a series of discrete element method (DEM) simulations of bender element tests on a simple, idealised granular material. DEM simulations provide the opportunity to study the mechanics of this testing approach in detail. The DEM model is shown to be capable of capturing features of the system response that had previously been identified in continuum-type analyses of the system. The propagation of the wave through the sample can be monitored at the particle-scale in the DEM simulation. In particular, the particle velocity data indicated the migration of a central S-wave accompanied by P-waves moving along the sides of the sample. The elastic stiffness of the system was compared with the stiffness calculated using different approaches to interpreting bender element test data. An approach based upon direct decomposition of the signal using a fast-Fourier transform yielded the most accurate results.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Geotechnical Engineering and Soil Mechanics · Geotechnical Engineering and Underground Structures · Landslides and related hazards

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Shirley, D.J., Hampton, L.D.: Shear-wave measurements in laboratory sediments. J. Acoust. Soc. Am. 63(2), 607–613 (1978)10.1121/1.381760 ↗
2. Alvarado, G.: Influence of late cementation on the behaviour of reservoir sands. PhD thesis, Imperial College London (2007)
3. Sadek, T.: The multiaxial behaviour and elastic stiffness of Hostun sand. PhD thesis, University of Bristol (2006)
4. Kuwano, R., Jardine, R.J.: On the applicability of cross-anisotropic elasticity to granular materials at very small strains. Géotechnique 52(10), 727–749 (2002)10.1680/geot.2002.52.10.727 ↗
5. Blewett, J., Blewett, I., Woodward, P.: Phase and amplitude responses associated with the measurement of shear-wave velocity in sand by bender elements. Can. Geotech. J. 37, 1348–1357 (2000)10.1139/t00-047 ↗
6. Japanese Domestic Committee for TC-29: International Parallel Test on the Measurement of $$\text{ G}_{\rm {max}}$$ Using Bender Elements Organized by TC-29 (2005)
7. Arroyo, M., Muir-Wood, D., Greening, P.D., Medina, L., Rio, J.F.: Effects of sample size on bender-based axial $$\text{ G}0$$ measurements. Géotechnique 56(1), 39–52 (2006)10.1680/geot.2006.56.1.39 ↗
8. Rio, J.: Advances in laboratory geophysics using bender elements. PhD thesis, University College London, London (2006)
9. Thornton, C.: Numerical simulations of deviatoric shear deformation of granular media. Geotechnique 50(1), 43–53 (2000)10.1680/geot.2000.50.1.43 ↗
10. Cui, L., O’Sullivan, C., O’Neill, S.: An analysis of the triaxial apparatus using a mixed boundary three-dimensional discrete element model. Géotechnique 57(10), 831–844 (2007)10.1680/geot.2007.57.10.831 ↗
11. Hazzard, J.F., Maxwell, S.C., Young, R.P.: Micromechanical modelling of acoustic emissions. In Society of Petroleum Engineers, pp. 519–526 (1998)10.2118/47320-MS ↗
12. Li, L., Holt, R.M.: Particle scale reservoir mechanics. Oil Gas Sci. Technol. 57(5), 525–538 (2002)10.2516/ogst:2002035 ↗
13. Mouraille, O., Herbst, O., Luding, S.: Sound propagation in isotropically and uni-axially compressed cohesive, frictional granular solids. Eng. Fract. Mech. 76, 786–791 (2009)10.1016/j.engfracmech.2008.09.001 ↗
14. Marketos, G.: Simulating P-wave propagation in DEM. In: Munjiza, A. (ed.) Proceedings of the 5th International Conference on Discrete Element Methods, London, pp. 458–463 (2010)
15. Carter, K.: Simulation of bender element tests in the cubical cell apparatus using the distinct element method. MSc dissertation, Imperial College London (2010)
16. Clement, S.: Simulating bender element tests using the distinct element method. MSc dissertation, Imperial College London (2006)
17. Itasca, $$\text{ PFC}2D$$ Version 3.0 User Manual, Itasca Consulting Group, Minneapolis (2004)
18. Rowe, P.W.: The stress dilatancy relation for static equilibrium of an assembly of particles in contact. Proc. R. Soc. 269(1339), 500–527 (1962)10.1098/rspa.1962.0193 ↗
19. O’Sullivan, C., Bray, J.D., Riemer, M.F.: Influence of particle shape and surface friction variability on response of rod-shaped particulate media. J. Eng. Mech. 128(11), 1182–1192 (2002)10.1061/(ASCE)0733-9399(2002)128:11(1182) ↗
20. Velicky, B., Caroli, C.: Pressure dependence of the sound velocity in a two-dimensional lattice of Hertz-Mindlin balls: mean-field description. Phys. Rev. E 65, 021307 (2002)10.1103/PhysRevE.65.021307 ↗
21. Thornton, C.: The conditions for failure of a face-centred cubic array of uniform rigid spheres. Géotechnique 29(4), 441–459 (1979)10.1680/geot.1979.29.4.441 ↗
22. Jia, X., Caroli, C., Velicky, B.: Ultrasound propagation in externally stressed granular media. Phys. Rev. Lett. 82(9), 1863–1866 (1999)10.1103/PhysRevLett.82.1863 ↗
23. Liu, C.-H., Nagel, S.R.: Sound in a granular material: disorder and nonlinearity. Phys. Rev. B 48(21), 15646–15650 (1993)10.1103/PhysRevB.48.15646 ↗
24. Liu, C.-H.: Spatial patterns of sound propagation in sand. Phys. Rev. B 50(2), 782–794 (1994)10.1103/PhysRevB.50.782 ↗
25. Makse, H.A., Gland, N., Johnson, D.L., Schwartz, L.: Granular packings: nonlinear elasticity, sound propagation and collective relaxation dynamics. Phys. Rev. E 70, 061302 (2004)10.1103/PhysRevE.70.061302 ↗
26. Santamarina, C., Cascante, G.: Stress anisotropy and wave propagation: a micromechanical view. Can. Geotech. J. 33(5), 770–782 (1996)10.1139/t96-102-323 ↗
27. O’Sullivan, C.: Particulate Discrete Element Modelling: A Geomechanics Perspective. Taylor and Francis, London (2011)10.1201/9781482266498 ↗
28. Oda, M., Nemat-Nasser, S., Konishi, J.: Stress-induced anisotropy in granular masses. Soils Found. 25(3), 85–97 (1985)10.3208/sandf1972.25.3_85 ↗
29. Kuhn, M.R.: Structured deformation in granular materials. Mech. Mater. 31, 407–429 (1999)10.1016/S0167-6636(99)00010-1 ↗
30. Rothenburg, L., Bathurst, R.J.: Analytical study of induced anisotropy in idealized granular materials. Géotechnique 39(4), 601–614 (1989)10.1680/geot.1989.39.4.601 ↗
31. Cheung, G., O’Sullivan, C.: Effective simulation of flexible lateral boundaries in two- and three-dimensional DEM simulations. Particuology 6, 483–500 (2008)10.1016/j.partic.2008.07.018 ↗
32. Lee, J.-S., Santamarina, J.C.: Bender elements: performance and signal interpretation. J. Geotech. Geoenviron. Eng. 131(9), 1063–1070 (2005)10.1061/(ASCE)1090-0241(2005)131:9(1063) ↗
33. Jovičić, V., Coop, M.R., Simić, M.: Objective criteria for determining $$\text{ G}max$$ from bender element tests. Géotechnique 46(2), 357–362 (1996)10.1680/geot.1996.46.2.357 ↗
34. Potyondy, D.O., Cundall, P.A.: A bonded-particle model for rock. Int. J. Rock Mech. Min. Sci. 41, 1329–1364 (2004)10.1016/j.ijrmms.2004.09.011 ↗
35. García, X., Medina, E.: Acoustic response of cemented granular sedimentary rocks: molecular dynamics modeling. Phys. Rev. E 75, 1–12 (2007)10.1103/PhysRevE.75.061308 ↗
36. Viggiani, G., Atkinson, J.: Interpretation of bender element tests. Géotechnique 45(1), 149–154 (1995)10.1680/geot.1995.45.1.149 ↗
37. Jovičić, V., Coop, M.R.: Stiffness of coarse-grained soils at small strains. Géotechnique 47(3), 545–561 (1997)10.1680/geot.1997.47.3.545 ↗
38. Arulnathan, R., Boulanger, R., Riemer, M.F.: Analysis of bender element tests. Geotech. Test. J. 21(2), 120–131 (1998)10.1520/GTJ10750J ↗
39. Leong, E., Cahyadi, J., Rahardjo, H.: Measuring shear wave velocity using bender elements. Geotech. Test. J. 28(5), 1–11 (2005)10.1520/GTJ12196 ↗
40. Hardy, S.: The implementation and application of dynamic finite element analysis to geotechnical problems. PhD thesis, Imperial College London, London (2003)
41. Greening, P.D., Nash, D.F.T., Benahemd, N., Ferreira, C., da Fonseca, A.V.: Comparison of shear wave measurements in different materials using time and frequency domain techniques. In: Di. Benedetto, H., et al. (eds.) Proceedings of Deformation Characteristics of Geomaterials, Swets and Zeitlinger, Lisse (2003)
42. Sadd, M.H., Tai, Q., Shukla, A.: Contact law effects on wave propagation in particulate materials using distinct element modelling. Int. J. Non-Linear Mech. 28(2), 251–265 (1993)10.1016/0020-7462(93)90061-O ↗