Development and characterization of organo fluorohectorite polyethersulfone nanocomposites for high performance applications
Source abstract
Abstract
Abstract Organo modified fluorohectorite (OFH) polyethersulfone (PES) nanocomposites were successfully developed by OFH dispersion in PES matrix. The dispersion of OFH in PES was investigated using different techniques such as attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffraction (XRD), atomic force microscopy (AFM) and transmission electron microscopy (TEM). The results of thermal, mechanical and contact angle measurements of OFH PES nanocomposites were found to be enhanced significantly by the incorporation of OFH into the PES matrix. The corrosion resistant properties of clay polymer nanocomposite (CPN) coatings were characterized by electrochemical impedance spectroscopy (EIS), open circuit potential measurements (OCP) and water adsorption test. These experimental results showed that the corrosion protection effect of OFH PES nanocomposite coatings were superior to that of pure PES.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Polymer Nanocomposite Synthesis and Irradiation · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Impact of chemical cleaning on properties and functioning of polyethersulfone membranes10.1016/j.memsci.2007.08.007 ↗
2. Nanofilled polyethersulfone as matrix for continuous glass fibers composites: mechanical properties and solvent resistance10.1002/adv.20187 ↗
3. Surface characterization by FTIR-ATR spectroscopy of polyethersulfone membranes-unmodified, modified and protein fouled10.1016/S0376-7388(00)00316-1 ↗
4. Clay minerals properties responsible for clay-based polymer nanocomposite (CPN) performance
5. Brady · 2003
6. Charge homogeneity in synthetic fluorohectorite10.1021/cm011014m ↗
7. Pervaporation behavior of asymmetric sulfonated polysulfones and sulfonated polyethersulfone membranes10.1002/(SICI)1097-4628(20000509)76:6<787::AID-APP4>3.0.CO;2-1 ↗
8. Natural rubber-clay nanocomposites: mechanical and structural properties10.1016/j.polymer.2010.06.026 ↗
9. Effect of clay on the corrosion protection efficiency of PMMA/Na+-MMT clay nanocomposite coatings evaluated by electrochemical measurements10.1016/j.eurpolymj.2007.10.011 ↗
10. Morphology and properties of nanocomposites formed from ethylene-vinyl acetate copolymers and organoclays10.1016/j.polymer.2007.08.040 ↗
11. A new model for estimation of water uptake of an organic coating by EIS: the tortuosity pore model10.1016/j.porgcoat.2008.11.007 ↗
12. Preparation of non-chromium polymer films on zinc for corrosion protection due to a compound effect between silane and cerium salt10.1108/00035590910969356 ↗
13. Enhancement of char formation of polymer nanocomposites using a catalyst10.1016/j.polymdegradstab.2009.07.014 ↗
14. Morphological study of fluorinated asymmetric polyetherimide ultrafiltration membranes by surface modifying macromolecules10.1016/S0376-7388(02)00523-9 ↗
15. High performance epoxy-layered silicate nanocomposites10.1002/pen.11074 ↗
16. Physical, mechanical, and conductivity properties of poly (3-hexylthiophene)-montmorillonite clay nanocomposites produced by the solvent casting method10.1021/ma0490496 ↗
17. Contact angle interpretation in terms of solid surface tension10.1016/S0927-7757(99)00323-4 ↗
18. Assessment of corrosion resistance of surface coated galvanized steel by analysis of the A.C. impedance spectra measured on the salt spray tested specimen10.1007/s10008-006-0229-5 ↗
19. Some comments on the modes of action of nanocomposites in the flame retardancy of polymers10.1002/fam.813 ↗
20. Corrosion protection of mild steel by electroactive polyaniline coatings10.1016/S0379-6779(97)03860-5 ↗
21. High-resolution thermogravimetry of polyethersulfone chips in four atmospheres10.1002/app.13091 ↗
22. Chromium (III) and chromium (VI) surface treated galvanized steel for outdoor constructions. Environmental aspects10.1021/es1003022 ↗
23. Hydrophilic modification of polyethersulfone used TiO2 nanoparticles by a sol–gel process10.1016/j.jmatprotec.2005.11.004 ↗
24. Application of thermal analysis methods for characterization of polymer montmorillonite nanocomposites10.1007/s10973-008-9128-6 ↗
25. Gas barrier of polystyrene montmorillonite clay nanocomposites: effect of mineral layer aggregation10.1002/polb.21181 ↗
26. Simple theory of stress–strain properties of filled polymers10.1002/app.1966.070100107 ↗
27. Polymer nanotechnology: nanocomposites10.1016/j.polymer.2008.04.017 ↗
28. A review on polymer-layered silicate nanocomposites10.1016/j.progpolymsci.2008.07.008 ↗
29. Barrier properties of nylon 6- montmorillonite nanocomposite membranes prepared by melt blending: Influence of the clay content and dispersion state: consequences on modeling10.1016/j.memsci.2007.01.030 ↗
30. Preparation and properties of ethylene vinyl acetate-clay hybrids10.1023/A:1011627107381 ↗
31. EVA/clay nanocomposite by solution blending: effect of aluminosilicate layers on mechanical and thermal properties10.1007/BF03218362 ↗
32. Preparation of polymer–clay nanocomposites and their properties10.1002/adv.20079 ↗
33. Polyethersulfone-expanded graphite nanocomposites: charge transport and impedance characteristics10.1016/j.compscitech.2010.08.008 ↗
34. Structure–property relationships of irradiation grafted nano-inorganic particle filled polypropylene composites10.1016/S0032-3861(00)00325-6 ↗
35. Alternative to chromium: characteristics and wear behavior of HVOF coatings for gas turbine shafts repair (heavy-duty)10.1016/j.jmatprotec.2004.02.061 ↗
36. Development of nano CeO2 incorporated high performance hot-dip zinc coating10.1016/j.surfcoat.2008.04.090 ↗
37. CeO2–TiO2 mixed oxide incorporated high performance hot dip zinc coating10.1016/j.surfcoat.2010.10.067 ↗
38. Development of nano TiO2-incorporated phosphate coatings on hot dip zinc surface for good paintability and corrosion resistance10.1016/j.apsusc.2010.10.125 ↗
39. Montmorillonite polyaniline nanocomposites: preparation, characterization and investigation of mechanical properties10.1016/j.matchemphys.2008.08.055 ↗
40. Effect of exfoliation on poly(styrene-co-acrylonitrile)/montmorillonite nanocomposite flammability10.1002/pat.564 ↗
41. Polystyrene/calcium phosphate nanocomposites: dynamic mechanical and differential scanning calorimetric studies10.1016/j.compscitech.2008.08.008 ↗
42. Mechanical, atomic force microscopy and focused ion beam studies of isotactic polystyrene/titanium dioxide composites10.1016/j.compositesa.2008.10.005 ↗
43. Poly (ethylene-co-vinyl acetate)/calcium phosphate nanocomposites: thermo mechanical and gas permeability measurements10.1002/pc.20887 ↗
44. Poly(ethylene-co-vinyl acetate)/calcium phosphate nanocomposites: mechanical, gas permeability, and molecular transport properties10.1002/app.33238 ↗
45. The effect of nano-sized silicate layers from montmorillonite on glass transition, dynamic mechanical and thermal degradation properties of segmented polyurethane10.1002/app.11086 ↗
46. Structural and mechanical properties of polymer nanocomposites10.1016/j.mser.2006.06.001 ↗
47. BaTiO3-polyethersulfone nanocomposites with high dielectric constant and excellent thermal stability10.1016/j.compositesb.2010.08.006 ↗
48. Resistance of solid surfaces to wetting by water10.1021/ie50320a024 ↗
49. Polymer/layered silicate nanocomposite anticorrosive coatings10.1016/j.jiec.2008.01.011 ↗
50. Effect of organoclay on the thermal stability, mechanical strength, and surface wettability of injection-molded ABS-clay nanocomposite materials prepared by melt intercalation10.1002/app.22329 ↗
51. Structure, properties and corrosion resistivity of polymeric nanocomposite coatings based on layered silicates10.1007/s11998-007-9065-5 ↗
52. Synthesis and thermal behaviour of layered silicate-EVA nanocomposites10.1016/S0032-3861(00)00775-8 ↗
53. Clay-based polymer nanocomposites: research and commercial development10.1166/jnn.2005.411 ↗
54. Fire properties of polystyrene-clay nanocomposites10.1021/cm000984r ↗