Tailoring the reactivity of bio-surfactants as a tool for montmorillonite exfoliation in epoxy thermosets
Source abstract
Abstract
Abstract It is well established that the chemical structure of surfactants used to promote the dispersion of clay minerals in polymers plays a major role in clay polymer nanocomposites preparation. However, much less explored is the incorporation of reactive surfactants capable of covalently grafting to monomers and polymer chains. In this work, the effect of the reactivity degree of bio-based surfactants onto the exfoliation of montmorillonite in epoxy is evidenced. For this purpose, 3 surfactants were prepared from a derivative of Cardanol, incorporating reactive groups: N(CH 3 ) 2 , NH 2 or two NH 2 functions. In each case, the organomodification of the clay mineral results in a similar interlayer space increase. Combined chemical derivatization and MALDI-TOF/MS was used to evidence the differences of the residual reactivity of the intercalated surfactants. Finally each organomodified clay mineral was used for the preparation of epoxy nanocomposites. Interestingly, for the most reactive surfactant, X-ray diffraction analysis evidenced a fully exfoliated structure while semi-exfoliation or intercalated structure was found for the less reactive surfactants.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials10.1016/S0927-796X(00)00012-7 ↗
2. Recent advances in cardanol chemistry in a nutshell: from a nut to nanomaterials10.1039/C2CS35344J ↗
3. Study of interlayer spacing collapse during polymer/clay nanocomposite melt intercalation10.1166/jnn.2008.020 ↗
4. Bergaya · 2011 · 45
5. Chapter 13.0 — introduction to Clay–Polymer Nanocomposites (CPN)10.1016/B978-0-08-098258-8.00020-1 ↗
6. Effect of melt processing conditions on the extent of exfoliation in organoclay-based nanocomposites10.1016/S0032-3861(01)00473-6 ↗
7. Polymer layered silicate nanocomposites10.1002/adma.19960080104 ↗
8. Thermal analysis of montmorillonites modified with quaternary phosphonium and ammonium surfactants10.1016/j.clay.2006.09.005 ↗
9. Chapter 13.1 — smectite–polymer nanocomposites10.1016/B978-0-08-098258-8.00021-3 ↗
10. Mechanism of clay tactoid exfoliation in epoxy–clay nanocomposites10.1021/cm00059a023 ↗
11. A pitfall of using 2-[(2E)-3-(4-tert-butylphenyl)-2-methylprop-2-enylidene]malononitrile as a matrix in MALDI TOF MS: chemical adduction of matrix to analyte amino groups10.1002/jms.1814 ↗
12. Synthesis and characterization of layered silicate–epoxy nanocomposites10.1021/cm00046a026 ↗
13. Physical, mechanical, and thermal properties of polyurethanes based on hydroxyalkylated cardanol–formaldehyde resins10.1002/app.22016 ↗
14. Polymer/layered silicate nanocomposites: a review from preparation to processing10.1016/j.progpolymsci.2003.08.002 ↗
15. Long-chain phenols: IV. Quantitative determination of the olefinic composition of the component phenols in cashew nut-shell liquid10.1016/S0021-9673(00)99275-6 ↗
16. Organomodification of sepiolite clay using bio-sourced surfactants: compatibilization and dispersion into epoxy thermosets for properties enhancement10.1016/j.compscitech.2013.02.019 ↗
17. Functionalization of cardanol: towards biobased polymers and additives10.1039/C3PY01194A ↗
18. Hybrid organic–inorganic nanocomposites: exfoliation of magadiite nanolayers in an elastomeric epoxy polymer10.1021/cm970784o ↗