journal article·2011-06

Ceramic behaviour of some kaolins from Cauquenes Province (VII Region of Maule, Chile)

S. Meseguer, F. Pardo, M.M. Jordan, T. Sanfeliu, I. González

Applied Clay Science· Volume 52· Issue 4
Publisher page

Abstract

Abstract This study was focused on the properties of ceramic clays from Chile, a country with an important local ceramic industry. Four deposits with industrial applications were studied. The kaolins come from Cauquenes Province in the VII Region of Chile. The chemical and mineralogical composition of clays was determined by X-ray fluorescence (XRD) and X-ray diffraction (XRD). Also, the plasticity index (PI) was measured for each sample. Test samples were prepared by pressing and firing at 800–1150 °C. Linear contraction (LC), water absorption capacity (WAC) and thermodilatometric analysis (TDA) were done to characterize the fired clays. The clays deposits studied were highly plastic kaolins with very high contents of unaltered kaolinite. A considerable decrease in the WAC coinciding with the beginning of vitrification was observed between 1050 and 1100 °C. At 1150 °C, the porosity of the tile bodies decreased significantly. The studied clays seem to be easily adaptable to a correct dry pressing ceramic process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation · Glass properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Permeabilidad al aire de soportes cocidos de pavimento cerámico
2. Geología de yacimientos de arcillas plásticas para la elaboración de cerámica blanca y refractarios en las regiones VI y VII, Chile
3. The influence of shaping and firing technology on ceramic properties of calcareous and non-calcareous illitic-chloritic clays10.1016/S0169-1317(01)00076-X ↗
4. Influence of mineralogy and firing temperature on the porosity of bricks10.1016/S0955-2219(03)00249-8 ↗
5. Sintering studies on plastic clays10.1016/0272-8842(92)90066-M ↗
6. Sensibilità all'essiccamento e caratteristiche porosimetriche delle argille italiane per laterizi
7. Dondi · Chemical, mineralogical and ceramic properties of kaolinitic materials from the Tresnuraghes mining district (Western Sardinia, Italy) · 2001
8. Technological behaviour of some Tunisian clays prepared by dry ceramic processing10.1180/claymin.2008.043.3.01 ↗
9. Firing transformations of cretaceous clays used in the manufacturing of ceramic tiles10.1016/S0169-1317(98)00052-0 ↗
10. Firing transformations of Tertiary clays used in the manufacturing of ceramic tile bodies10.1016/S0169-1317(00)00044-2 ↗
11. Influence of firing temperature and mineralogical composition on bending strength and porosity of ceramic tile bodies10.1016/j.clay.2008.01.005 ↗
12. Mineralogy and firing transformations of Permo-Triassic clays used in the manufacturing of ceramic tile bodies10.1016/j.clay.2009.01.018 ↗
13. Plasticità delle argille italiane per laterizi e previsione del loro comportamento in foggiatura
14. Use of mine spoils from Teruel coal mining district10.1007/s00254-007-1185-9 ↗
15. Classification and statistical analysis of mine spoils chemical composition from Oliete Basin (Teruel. NE Spain)10.1007/s00254-008-1241-0 ↗
16. X-ray diffraction and the identification and analysis of clay minerals
17. An accelerated method for the determination of drying sensitivity
18. Bigot's curves: a practical and efficacious method to characterize unfired compacts obtained by casting