Formation and crystallization of Mg2+–Fe3+–SO42−–CO32−-type anionic clays

Abstract Hydrotalcite-like layered double hydroxides (LDHs) is usually produced in the laboratory via co-precipitation. However, the effect of synthesis parameters in contact with the atmosphere on LDH formation and crystallinity has not been studied in detail. The present study evaluated the role of aqueous pH, temperature, and divalent (M2 +) to trivalent (M3 +) cation ratio on Mg2 +Fe3 +SO42 −CO32 −-type LDH formation as well as the role of dissolved M2 + + M3 + concentrations, drying temperature, rate of cation supply, and aging temperature and time on the crystallinity of the LDH. Formation of hydrotalcite-like anionic clays was facilitated at pH ≥ 9, M2 +/M3 + ≥ 0.75, and 0–75 °C, with high pH and M2 +/M3 + ratio enhancing the degree of crystallinity. Low cation concentrations and high cation availability (high cation supply rate) resulted in better developed crystals. High M3 + concentration (M2 +/M3 + = 0.5) and pH 24 h lower degrees of crystallinity were observed as was enhanced cation ordering and increased crystal size. Drying immediately after precipitation resulted in crystal structural disorder.