journal article·2025-04Open access

An integrated micro- and nano-scale investigation of green aluminosilicate materials: New insight into the gel network after natural weathering

Maria Cristina Caggiani, Roberta Occhipinti, Germana Barone, Giuseppe Cultrone, Paolo Mazzoleni

Abstract

The microstructures of most of the geopolymers synthesized from different starting materials are composed of a mixture of (semi)-crystalline and amorphous phases. In this work we aim to investigate in dept the nanoscale morphology and composition of the gel phase of two volcanic- (Mt. Etna, Sicily) and metakaolin-based geopolymers. The main technique used is high-resolution transmission electron microscopy (HRTEM), with energy dispersive X-ray compositional analysis (STEM-EDS) and selected area electron diffraction (SAED). The results were compared with those obtained on a larger scale. For the first time, a focus at the micro- and nanoscale of geopolymers synthesized with these binary mixtures was achieved. The effect of weathering on the geopolymer network, the crystalline phases and the chemical composition was also evaluated showing, with the convergence of the results of complementary methods, that environmental exposure affects the products made with one type of precursor ( ghiara ) more than the other (volcanic ash). • Binary mixtures geopolymers of volcanic precursors / metakaolin were studied. • Behavior of geopolymers after natural weathering was evaluated at the nanoscale. • The different materials are differently affected by the environmental exposure. • Volcanic ash- based materials are less affected than ghiara paleosoil-based ones.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Clay minerals and soil interactions · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Influence of metakaolin purities on potassium geopolymer formulation: the existence of several networks10.1016/j.jcis.2013.07.024 ↗
2. Evidence of a gel in geopolymer compounds from pure metakaolin10.1007/s10971-013-3111-9 ↗
3. Thermal behaviour of inorganic geopolymers and composites derived from sodium polysialate10.1016/S0025-5408(02)01022-X ↗
4. Geopolymer production for conservation-restoration using Sicilian raw materials: feasibility studies10.1088/1757-899X/777/1/012001 ↗
5. Potentiality of the use of Pyroclastic Volcanic Residues in the production of Alkali Activated Material10.1007/s12649-020-01004-6 ↗
6. Nano- and Microporosity in Geopolymer Gels10.1017/S143192760606987X ↗
7. Management and valorisation of wastes through use in producing alkali-activated cement materials10.1002/jctb.4927 ↗
8. Engineering Properties of Alkali-Activated Natural Pozzolan Concrete
9. Role of Natural Stone Wastes and Minerals in the Alkali Activation Process: a Review10.3390/ma13102284 ↗
10. Influence of the addition of amorphous and crystalline silica on the structural properties of metakaolin-based geopolymers10.1016/j.clay.2021.106312 ↗
11. Geopolymers - Inorganic polymeric new materials10.1007/BF01912193 ↗
12. Physicochemical Characterization of Pulverized Phyllite Rock for Geopolymer Resin Synthesis10.1590/1980-5373-mr-2016-0968 ↗
13. The effects of cement/fly ash ratios on the volcanic slag aggregate lightweight concrete masonry units10.1016/j.conbuildmat.2007.05.011 ↗
14. Synthesis of geopolymer composites from a mixture of volcanic scoria and metakaolin10.1016/j.jascer.2014.08.003 ↗
15. Reactivity of volcanic ash in alkaline medium, microstructural and strength characteristics of resulting geopolymers under different synthesis conditions10.1007/s10853-016-0257-1 ↗
16. Gel Composition and Strength Properties of Alkali-Activated Oyster Shell-Volcanic Ash: effect of Synthesis Conditions10.1111/jace.14332 ↗
17. Volcanic ash-based geopolymer cements/concretes: the current state of the art and perspectives10.1007/s11356-016-8230-8 ↗
18. Rational utilization of volcanic ashes based on factors affecting their alkaline activation10.1016/j.jnoncrysol.2017.02.024 ↗
19. Profex : a graphical user interface for the Rietveld refinement program BGMN10.1107/S1600576715014685 ↗
20. Understanding the relationship between geopolymer composition, microstructure and mechanical properties10.1016/j.colsurfa.2005.06.060 ↗
21. The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers10.1016/j.colsurfa.2006.05.044 ↗
22. Radiation damage in the TEM and SEM10.1016/j.micron.2004.02.003 ↗
23. Microstructure development of alkali-activated fly ash cement: a descriptive model10.1016/j.cemconres.2004.08.021 ↗
24. FT-IR study of early stages of alkali activated materials based on pyroclastic deposits (Mt. Etna, Sicily, Italy) using two different alkaline solutions10.1016/j.conbuildmat.2020.120095 ↗
25. Effects of the addition of slaked lime to alkali-activated pastes based on volcanic ashes from Mt. Etna volcano (Italy)10.1016/j.ceramint.2024.04.181 ↗
26. Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O10.1016/j.cemconres.2011.05.006 ↗
27. Dissolution behaviour of source materials for synthesis of geopolymer binders: a kinetic approach10.1016/j.minpro.2016.05.014 ↗
28. Effect of Alumina Release Rate on the Mechanism of Geopolymer Gel Formation10.1021/cm101151n ↗
29. Volcanic ash and pumice as cement additives: pozzolanic, alkali-silica reaction and autoclave expansion characteristics10.1016/j.cemconres.2004.09.025 ↗
30. Global insights into micro-macro mechanisms and environmental implications of limestone calcined clay cement (LC3) for sustainable construction applications10.1016/j.scitotenv.2023.167794 ↗
31. Investigation of volcanic ash based geopolymers as potential building materials
32. TEM-EDX study of weathered layers on the surface of volcanic glass, bytownite, and hypersthene in volcanic ash from Sakurajima volcano, Japan10.2138/am-2001-2-311 ↗
33. Geopolymerisation: a review and prospects for the minerals industry10.1016/j.mineng.2007.07.011 ↗
34. Geopolymers: Nanoparticulate, Nanoporous Ceramics made under Ambient Conditions10.1017/S1431927604886719 ↗
35. Mechanical activation of fly ash and its influence on micro and nano-structural behaviour of resulting geopolymers10.1016/j.apt.2016.11.027 ↗
36. Multidisciplinary characterization of the “Ghiara” volcanic paleosoil (Mt. Etna volcano, Italy): Petrologic characters and genetic model
37. Use of infrared Spectroscopy to Study Geopolymerization of Heterogeneous Amorphous Aluminosilicates10.1021/la026127e ↗
38. Synthesis and thermal properties of inorganic polymers (geopolymers) for structural and refractory applications from volcanic ash10.1016/j.ceramint.2011.05.002 ↗
39. The role of iron in the formation of inorganic polymers (geopolymers) from volcanic ash: a 57Fe Mössbauer spectroscopy study10.1007/s10853-013-7319-4 ↗
40. Influence of the chemical and mineralogical composition on the reactivity of volcanic ashes during alkali activation10.1016/j.ceramint.2013.06.072 ↗
41. Review on the use of volcanic ashes for engineering applications10.1016/j.resconrec.2018.05.031 ↗
42. Volcanic ash as alternative raw materials for traditional vitrified ceramic products10.1179/174367607X159329 ↗
43. Characterization of the pore structure of metakaolin-derived geopolymers by neutron scattering and electron microscopy10.1107/S0021889811021078 ↗
44. Efflorescence control in geopolymer binders based on natural pozzolan10.1016/j.cemconcomp.2011.07.007 ↗
45. Ngouloure · 2024
46. Rietveld Refinement and X-ray Absorption Study on the Bonding States of Lanthanum-based Perovskite-Type Oxides La1−xCexCoO310.3390/cryst12010050 ↗
47. Alkali activated materials using pumice from the Aeolian Islands (Sicily, Italy) and their potentiality for cultural heritage applications: preliminary study10.1016/j.conbuildmat.2020.120391 ↗
48. Effect of atmospheric exposure on alkali activated binders and mortars from Mt. Etna volcanic precursors10.1016/j.matlet.2022.131940 ↗
49. Structural properties of volcanic precursors-based geopolymers before and after natural weathering10.1016/j.ceramint.2023.04.013 ↗
50. Alkali activated materials from Tajogaite volcanic ash (La Palma, Spain): a green recovery after the 2021 eruption10.30909/vol.07.02.717731 ↗
51. Ion exchange in the charge-balancing sites of aluminosilicate inorganic polymers10.1039/c0jm01254h ↗
52. Relations between the structural characteristics and compressive strength in metakaolin based geopolymers with different molar Si/Al ratios10.1016/j.ceramint.2015.04.125 ↗
53. A review on alkaline activation: New analytical perspectives10.3989/mc.2014.00314 ↗
54. Portland Versus Alkaline Cement: Continuity or Clean Break: “A Key Decision for Global Sustainability”10.3389/fchem.2021.705475 ↗
55. An overview of the utilisation of Fe-rich residues in alkali-activated binders: Mechanical properties and state of iron10.1016/j.jclepro.2021.129900 ↗
56. Provis · 2009
57. The role of particle technology in developing sustainable construction materials10.1016/j.apt.2009.10.006 ↗
58. Usage of Iranian scoria for copper and cadmium removal from aqueous solutions10.1007/s11771-015-2920-0 ↗
59. Recent progress in low-carbon binders10.1016/j.cemconres.2019.05.009 ↗
60. Metabentonite and metakaolin-based geopolymers/zeolites: relation between kind of clay, calcination temperature and concentration of alkaline activator10.1007/s10973-023-12267-1 ↗
61. CERAMICS Fabrication and characterization of hardened bodies from Japanese volcanic ash using geopolymerization10.1016/j.ceramint.2013.08.061 ↗
62. K-Based Geopolymer from metakaolin: roles of K/Al ratio and water or steam Curing at different temperatures10.3989/mc.2016.03115 ↗
63. The effect of adding alumina-oxide to metakaolin and volcanic ash on geopolymer products: a comparative study10.1016/j.conbuildmat.2012.04.023 ↗
64. Utilization of volcanic ashes for the production of geopolymers cured at ambient temperature10.1016/j.cemconcomp.2013.03.010 ↗
65. Influence of gibbsite and quartz in kaolin on the properties of metakaolin-based geopolymer cements10.1016/j.clay.2015.01.023 ↗
66. TEM and SAED characterization of metakaolin. Pozzolanic activity10.1111/j.1551-2916.2012.05325.x ↗
67. The potential use of geopolymeric materials to immobilise toxic metals part i. theory and applications Best Student Research Paper award for geopolymer research, in Australia Amazing World of Science10.1016/S0892-6875(97)00046-0 ↗
68. Effects of Si/Al ratio on the efflorescence and properties of fly ash based geopolymer10.1016/j.jclepro.2019.118852 ↗
69. Microstructural characterisation of geopolymers synthesised from kaolinite/stilbite mixtures using XRD, MAS-NMR, SEM/EDX, TEM/EDX, and HREM10.1016/S0008-8846(02)00859-1 ↗
70. The effect of alkali metals on the formation of geopolymeric gels from alkali-feldspars10.1016/S0927-7757(02)00499-5 ↗
71. Mechanical properties and durability of volcanic ash based geopolymer mortars10.1016/j.conbuildmat.2016.07.141 ↗
72. Composition design and microstructural characterization of calcined kaolin-based geopolymer cement10.1016/j.clay.2009.11.002 ↗
73. Early-Stage Geopolymerization Process of Metakaolin-based Geopolymer10.3390/ma15176125 ↗