Designing a novel nanocomposite: Ag nanoparticles deposited layered double oxide of calcium and aluminium to enhance corrosion resistance of steel bars in simulated concrete pore solution
Source abstract
Abstract
Layered double hydroxides (LDH) have undergone extensive investigation, showing potential for application in the corrosion protection of reinforced concrete. However, the chloride consolidation ability of LDH is sensitive to the anions in the environment. In this paper, based on the isomorphic substitutes for cement hydration products (AFm), Ag was deposited on layered double oxide of calcium and aluminium (CaAl-LDO@Ag) to improve the stability of chloride capture. The anti-bacterial performance of CaAl-LDO@Ag was also tested. The results indicated a significant enhancement in chloride binding capacity due to Ag deposition. The mechanism of capturing chloride ions was mainly the structural memory effect of LDO and the combination of Ag + and Cl − . On this basis, CaAl-LDO@Ag exhibited a better corrosion inhibition effect in the simulated concrete pore (SCP) solution, which was potentially attributed to the enhanced chloride threshold of steel bars. Moreover, antibacterial experiment demonstrated that CaAl-LDO@Ag effectively inhibits the reproduction of Escherichia coli ( E. coli).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Layered Double Hydroxides Synthesis and Applications · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar10.1016/S0008-8846(00)00265-9 ↗
2. Enhancement of the antibacterial efficiency of silver nanoparticles against gram-positive and gram-negative bacteria using blue laser light10.1155/2019/2528490 ↗
3. Chloride-induced corrosion of reinforcement in low-calcium fly ash-based geopolymer concrete10.1016/j.cemconres.2016.05.012 ↗
4. Durability of seawater and sea sand concrete filled filament wound FRP tubes under seawater environments10.1016/j.compositesb.2020.108409 ↗
5. Recent advances in the use of inhibitors to prevent chloride-induced corrosion in reinforced concrete10.1016/j.cemconres.2022.106719 ↗
6. Characteristics of the steel-concrete interface and their effect on the corrosion of steel bars in concrete10.1016/j.conbuildmat.2020.119162 ↗
7. Preparation of ca/Al-Layered double Hydroxide and the influence of their structure on early strength of cement10.1016/j.conbuildmat.2018.06.186 ↗
8. Chloride binding of synthetic Ca–Al–NO3 LDHs in hardened cement paste10.1016/j.conbuildmat.2015.05.047 ↗
9. Chloride binding capacity of LDHs with various divalent cations and divalent to trivalent cation ratios in different solutions10.1039/C9CE01322A ↗
10. Novel Ca-SLS-LDH nanocomposites obtained via lignosulfonate modification for corrosion protection of steel bars in simulated concrete pore solution10.1016/j.clay.2021.106195 ↗
11. Wearable fiber-based thermoelectrics from materials to applications10.1016/j.nanoen.2020.105684 ↗
12. Ca-LDH-modified cementitious coating to enhance corrosion resistance of steel bars
13. Improve corrosion resistance of steel bars in simulated concrete pore solution by the addition of EDTA intercalated CaAl-LDH10.1016/j.corsci.2023.111636 ↗
14. Swift reduction of 4-nitrophenol by easy recoverable magnetite-Ag/layered double hydroxide/starch bionanocomposite10.1016/j.carbpol.2019.115392 ↗
15. Structural characterization of chlorine intercalated Mg-Al layered double hydroxides: a comparative study between mechanochemistry and hydrothermal methods10.1016/j.jallcom.2016.05.032 ↗
16. Chloride binding in cement paste with calcined Mg-Al-CO3 LDH (CLDH) under different conditions10.1016/j.conbuildmat.2020.121678 ↗
17. Physicochemical and sorption properties of multi-walled carbon nanotubes decorated with silver nanoparticles10.1016/j.cej.2014.04.011 ↗
18. Evaluation of the resistance of mortars coated with silver bearing zeolite to bacterial-induced corrosion10.1016/j.corsci.2007.08.012 ↗
19. Preparation and characterization of lignosulfonate grafted layered double hydroxides and their applications as anti-ultraviolet additives for bitumen10.1016/j.conbuildmat.2018.11.100 ↗
20. Physicochemical properties of small metal particles in solution: “microelectrode” reactions, chemisorption, composite metal particles, and the atom-to-metal transition10.1021/j100123a004 ↗
21. Calcined Mytella falcata shells as a source for CaAl/LDH production: Synthesis and characterization10.1016/j.colsurfa.2022.128752 ↗
22. ASCE 2013 report card for america’s infrastructure10.2749/222137813806368343 ↗
23. Cr(VI) removal from aqueous solution using biochar modified with Mg/Al-layered double hydroxide intercalated with ethylenediaminetetraacetic acid10.1016/j.biortech.2018.12.114 ↗
24. CuMgFe-LDO as superior peroxymonosulfate activator for imidacloprid removal: Performance, mechanism and effect of pH10.1016/j.cej.2022.136135 ↗
25. Bacterial inactivation on concrete plates loaded with modified TiO2 photocatalysts under visible light irradiation10.3390/molecules24173026 ↗
26. Novel thermal decomposition approach for the synthesis of TiO2@Ag core-shell nanocomposites and their application for catalytic reduction of 4-nitrophenol
27. Enhanced Iodide Removal from Water by Nano-Silver Modified Anion Exchanger10.1021/acs.iecr.8b04635 ↗
28. Anti-corrosion mechanism of MgAl-LDHs inhibitors with varying anionic charge on reinforcing steel in simulated concrete pore solutions10.1016/j.conbuildmat.2022.129882 ↗
29. Effect of ginger extract as green inhibitor on chloride-induced corrosion of carbon steel in simulated concrete pore solutions10.1016/j.jclepro.2018.12.299 ↗
30. CaFeAl mixed oxide derived heterogeneous catalysts for transesterification of soybean oil to biodiesel10.1016/j.biortech.2015.02.046 ↗
31. Green synthesis of AgCl nanoparticles using Calotropis gigantea: Characterization and their enhanced antibacterial activities10.1016/j.cplett.2022.139699 ↗
32. Reinforcement corrosion assessment using linear polarisation techniques
33. Anion-Exchange Properties of Hydrotalcite-like Compounds10.1346/CCMN.1983.0310409 ↗
34. Incorporating TiO2 nanoparticles to enhance corrosion resistance, cytocompatibility, and antibacterial properties of PEO ceramic coatings on titanium
35. Surface chemistry of colloidal silver in aqueous solution: observations on chemisorption and reactivity10.1021/j100173a053 ↗
36. Determination of chloride content in cementitious materials: from fundamental aspects to application of Ag/AgCl chloride sensors10.3390/s17112482 ↗
37. Ag@AgCl embedded on cellulose film: a stable, highly efficient and easily recyclable photocatalyst10.1007/s10570-017-1438-z ↗
38. Potentiostatic transient technique, a simple approach to estimate the corrosion current density and Stern–Geary constant of reinforcing steel in concrete10.1016/j.cemconres.2010.04.006 ↗
39. Chlorine adsorption induced structure and energetics change of vinyl chloride physisorbed on Ag(111)10.1016/j.cplett.2006.10.096 ↗
40. Thermal behaviour of the nitrated AFm phase Ca4Al2(OH)12(NO3)2 • 4H2O and structure determination of the intermediate hydrate Ca4Al2(OH)12(NO3)2 • 2H2O10.1016/S0008-8846(99)00251-3 ↗
41. Ruthven · 1984
42. Photocatalytic, hydrophobic and antimicrobial characteristics of ZnO nano needle embedded cement composites10.1016/j.conbuildmat.2017.10.035 ↗
43. Electrochemical polarization: I. A theoretical analysis of the shape of polarization curves10.1149/1.2428496 ↗
44. Self-standing film assembled using SnS–Sn/multiwalled carbon nanotubes encapsulated carbon fibers: a potential large-scale production material for ultra-stable sodium-ion battery anodes10.1021/acsami.1c07152 ↗
45. Improving the corrosion protection ability of epoxy coating using CaAl LDH intercalated with 2-mercaptobenzothiazole as a pigment on steel substrate
46. Evaluation of chitosan and carboxymethyl cellulose as ecofriendly corrosion inhibitors for steel10.1016/j.ijbiomac.2018.06.014 ↗
47. Hydrocalumite and its polymer derivatives. 1. Reversible thermal behavior of friedel’s salt: a direct observation by means of high-temperature in situ powder X-ray diffraction10.1021/cm031069j ↗
48. A staggered type of 0D/2D CuInS2/NiAl-LDH heterojunction with enhanced photocatalytic performance for the degradation of 2,4-Dichlorophenol10.1016/j.seppur.2022.121215 ↗
49. Multi-layer active interface construction with polyphenols and nano-silver on nano collagen fiber for efficient capturing iodine vapor10.1016/j.apsusc.2022.153585 ↗
50. Chloride removal and corrosion inhibitions of nitrate, nitrite-intercalated MgAl layered double hydroxides on steel in saturated calcium hydroxide solution10.1016/j.clay.2018.07.023 ↗
51. Corrosion protection of steel by Mg-Al layered double hydroxides in simulated concrete pore solution: effect of SO4210.1016/j.corsci.2019.108223 ↗
52. Effect of MgAl-NO2 LDHs inhibitor on steel corrosion in chloride-free and contaminated simulated carbonated concrete pore solutions10.1016/j.corsci.2020.108940 ↗
53. Bimetallic-ZIFs derived quaternary amorphous LDHs decorated with crystalline Ag nanoparticles for highly efficient oxygen evolution reaction10.1016/j.cej.2022.137901 ↗
54. Noble metal-based nanomaterials as antibacterial agents10.1016/j.jallcom.2022.164091 ↗
55. Distribution of corrosion and pitting factor of steel in corroded RC beams10.1016/j.conbuildmat.2015.07.119 ↗
56. Surface chemistry and corrosion behaviour of 304 stainless steel in simulated seawater containing inorganic sulphide and sulphate-reducing bacteria10.1016/j.corsci.2013.04.058 ↗
57. Corrosion behavior of the reinforcement in chloride-contaminated alkali-activated fly ash pore solution10.1016/j.compositesb.2021.109215 ↗
58. Hierarchically constructed Ag nanowires shelled with ultrathin Co-LDH nanosheets for advanced oxygen evolution reaction10.1016/j.apcatb.2021.120601 ↗
59. Antibacterial durability and biocompatibility of antibacterial-passivated 316L stainless steel in simulated physiological environment10.1016/j.msec.2019.03.021 ↗
60. Construction of novel Ag@SrNbO/LDH ternary hybrid with high catalytic performance towards the reduction of 4-nitrophenol10.1016/j.apsusc.2022.152425 ↗
61. Antibacterial performance of electrodeposited Cu@Cu2O coatings on concrete using printed circuit board wastewater10.1016/j.jclepro.2022.135373 ↗
62. Hierarchical meso/macro-porous TiO2/graphitic carbon nitride nanofibers with enhanced hydrogen evolution10.1016/j.matdes.2021.109542 ↗