Mechanistic insight into impact of clay on compressive elasticity of poly(N-alkyl acrylamide)/Laponite-based nanocomposite cryo-beads
Source abstract
Abstract
Relationship between formation pathway and Hertzian elasticity of poly(N-isopropylacrylamide- co ‑sodium acrylate)/Laponite® XLG, P(NIPA-NaA)/LAP, based nanocomposite cryo-beads was evaluated. Millimeter-sized nanocomposite cryo-beads were prepared by combination of dropwise freezing into cryogenic liquid (DFLC) method with sedimentation cryogelation method. pH-sensitive 3D-templete was formed by conducting free-radical crosslinking cryopolymerization of NIPA and NaA in the presence of synthetic hectorite Laponite® XLG as inorganic crosslinker and N,N′-methylenebis(acrylamide) as chemical crosslinker. The effects of network template, ionic comonomer, inorganic clay incorporation, pH- and ionic strength of swelling medium on the swelling and elasticity were evaluated as a function of bead size. The deformability of swollen cryo-beads was investigated using Hertzian elasticity. The crosslink density and Hertz modulus of nanocomposite beads vary with the droplet size and the polymer spheres with low crosslink density tend to absorb more water. In DFLC method, the desired sphere size and swelling can be adjusted by selecting the needle size used for dripping. The swelling degree increased significantly as the size of nanocomposite cryo-beads increased. At a fixed swelling ratio, the cylindrical nanocomposite cryogels exhibited greater elastic moduli and crosslink density than that of spherical gels. Correlation of elastic modulus of cryo-beads with swelling and cross-linked polymer concentration predicted a higher scaling exponent than the classical estimate for swelling in good solvents. It was investigated how the presence of 30 mol% pH-sensitive anionic comonomer NaA in the structure of all nanocomposite gels affects their pH-dependent swelling behavior. At pH < 5.7, the gels exhibited a lower swelling ratio, whereas at pH > 6.6 they tended to swell and followed second-order swelling kinetics by Fickian diffusion. When pH of swelling medium was alternately changed, all gels exhibited a pH-switch and swelling rate was two times higher than shrinkage rate. By investigating the effect of KCl, NaCl and K 2CO 3 on the swelling of cryobeads, it was determined how the salt cation changes the electrostatic repulsion between network charges. Nanocomposite cryo-beads showed fast pH-responsiveness and immediately reabsorbed the water they lost due to pH change, therefore, they can be designed as drug release carriers by pH-switching modulation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogels: synthesis, properties, applications · biodegradable polymer synthesis and properties · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Sodium alginate-halloysite nanotube gel beads as potential delivery system for sunitinib malate anticancer compound10.1016/j.matlet.2020.128038 ↗
2. Novel composite gel beads for the immobilization of ammonia-oxidizing bacteria: fabrication, characterization, and biokinetic analysis10.1016/j.cej.2018.02.087 ↗
3. Modeling of the pH-sensitive behavior of an ionic gel in the presence of diffusion10.1016/j.ijnonlinmec.2003.10.001 ↗
4. Fabrication of PLG microspheres with precisely controlled and monodisperse size distributions10.1016/S0168-3659(01)00289-9 ↗
5. Subcritical CO2 sintering of microspheres of different polymeric materials to fabricate scaffolds for tissue engineering10.1016/j.msec.2013.08.010 ↗
6. The nature of laponite: pure hectorite or a mixture of different trioctahedral phases?10.3390/min8080314 ↗
7. Edge-modification of laponite with dimethyl-octylmethoxysilane10.1016/j.jcis.2008.01.032 ↗
8. Synthesis of monodisperse biodegradable microgels in microfluidic devices10.1021/la051527y ↗
9. Effect of alumina nanoparticles on the antifouling properties of polycarbonate-polyurethane blend ultrafiltration membrane for water treatment10.1002/pen.25764 ↗
10. Statistical mechanics of cross-linked polymer networks. II. Swelling10.1063/1.1723792 ↗
11. The role of backbone hydration of poly(N-isopropyl acrylamide) across the volume phase transition compared to its monomer10.1038/s41598-017-17272-7 ↗
12. Layered silicate clay functionalized with amino acids: wound healing application10.1039/C4RA05216A ↗
13. Tunable optical and swelling/deswelling properties associated with control of the coil-to-globule transition of poly(N-isopropylacrylamide) in polymer-clay nanocomposite gels10.1021/ma071348i ↗
14. Hertz · 1896 · 92 · 156
15. Theory of the elastic properties of rubber10.1063/1.1723785 ↗
16. Suspension polymerization of thermally expandable core/shell particles10.1016/j.polymer.2006.03.013 ↗
17. Preparation of filled temperature-sensitive poly(N-isopropylacrylamide) gel beads10.1002/masy.200450641 ↗
18. A infrared spectroscopic study on the mechanism of temperature-induced phase transition of concentrated aqueous solutions of poly(N-isopropylacrylamide) and N-isopropylpropionamide10.1016/j.polymer.2010.01.036 ↗
19. Luminescent hybrid materials based on laponite clay10.1002/chem.201402794 ↗
20. Swelling, pH sensitivity, and mechanical properties of poly(acrylamide-co-sodium methacrylate) nanocomposite hydrogels impregnated with carboxyl-functionalized carbon nanotubes10.1002/pc.22180 ↗
21. Synthesis of modified chitosan gel beads and adsorption performance of Cu(II)10.1007/s11270-020-04636-5 ↗
22. Synthesis and characterization of silica/poly (methyl methacrylate) nanocomposite latex particles through emulsion polymerization using a cationic azo initiator10.1006/jcis.2002.8310 ↗
23. Preparation of novel magnetic sodium alginate-ferric(III) gel beads and their super-efficient removal of direct dyes from water10.1007/s10924-020-01977-4 ↗
24. Analysis of endoscopic injectability and post-ejection dripping of yield stress fluids: laponite, carbopol and Xanthan Gum10.1252/jcej.21we018 ↗
25. Enhanced photocatalytic degradation of toxic contaminants using Dy2O3-SiO2 ceramic nanostructured materials fabricated by a new, simple and rapid sonochemical approach10.1016/j.ultsonch.2021.105892 ↗
26. Magnetic hierarchically macroporous emulsion-templated poly(acrylic acid)–iron oxide nanocomposite beads for water remediation10.1021/acs.langmuir.9b01121 ↗
27. Hertzian elasticity and triggered swelling kinetics of poly(amino ester)-based gel beads with controlled hydrophilicity and functionality: a mild and convenient synthesis via dropwise freezing into cryogenic liquid10.1016/j.eurpolymj.2019.02.018 ↗
28. Novel responsive poly(N,N-dimethylaminoethyl methacrylate) gel beads: preparation, mechanical properties and pH-dependent swelling behavior10.1007/s10965-012-9914-5 ↗
29. Non-Gaussian elasticity and charge density dependent swelling of strong polyelectrolyte poly(N-isopropylacrylamide-co-sodium acrylate) hydrogels10.1039/C7SM01866E ↗
30. Finite extensibility and deviation from Gaussian elasticity of dimethylacrylamide-based gels with different charge density: insight into pH/solvent-dependent swelling and surfactant interactions10.1016/j.polymer.2017.11.013 ↗
31. Tailoring the physico-chemical properties and elasticity of poly (hydroxy-functional methacrylate)-based cationically charged gel beads: combined hydrophobicity and mechanical durability through frozen droplets10.1016/j.eurpolymj.2017.09.005 ↗
32. Laponite-derived porous clay heterostructures: II. FTIR study of the structure evolution10.1016/j.micromeso.2009.07.012 ↗
33. The swelling interface number as a criterion for prediction of diffusional solute release mechanisms in swellable polymers10.1002/pol.1983.180210614 ↗
34. Hydrogels in pharmaceutical formulations10.1016/S0939-6411(00)00090-4 ↗
35. Synthesis and characterization of gelatin nanoparticles using CDI/NHS as a non-toxic cross-linking system10.1007/s10856-010-4178-2 ↗
36. Preparation of ion-imprinted montmorillonite nanosheets/chitosan gel beads for selective recovery of Cu(II) from wastewater10.1016/j.chemosphere.2020.126560 ↗
37. Characteristic swelling–deswelling of polymer/clay nanocomposite gels10.1021/ma201272j ↗
38. Green synthesis of Ag/Fe3O4 nanocomposite using Euphorbia peplus Linn leaf extract and evaluation of its catalytic activity10.1016/j.jcis.2017.02.037 ↗
39. Swelling kinetics of polymers10.1080/00222349208215453 ↗
40. Studies on thermal and swelling properties of Poly (NIPAM-co-2-HEA) based hydrogels
41. Magnetic Lu2Cu2O5-based ceramic nanostructured materials fabricated by a simple and green approach for an effective photocatalytic degradation of organic contamination10.1039/D1RA06101A ↗
42. Size adjustment of spherical temperature-sensitive hydrogel beads by liquid–liquid dispersion using a Kenics static mixer10.1016/j.cej.2009.11.010 ↗
43. Preparation of poly(N-isopropylacrylamide) hydrogel beads by circulation polymerization10.1016/j.reactfunctpolym.2010.10.004 ↗
44. Preparation of poly(N-isopropylacrylamide) hydrogel beads by sedimentation polymerization combined with electrostatic atomization10.1007/s00289-015-1359-7 ↗
45. Treloar · 1975 · 60
46. 2-Hydroxypropylmethacrylate based mono- and bifunctional gel beads prepared by suspension polymerization10.1002/1097-0126(200006)49:6<485::AID-PI388>3.0.CO;2-G ↗
47. Pectin–glycerol gel beads: preparation, characterization and swelling behaviour10.1016/j.carbpol.2020.116166 ↗
48. Polymer coating/encapsulation of nanoparticles using a supercritical anti-solvent process10.1016/S0896-8446(03)00011-1 ↗
49. Assessment of nano-hydroxyapatite and poly (lactide-co-glycolide) nanocomposite microspheres fabricated by novel airflow shearing technique for in vivo bone repair10.1016/j.msec.2021.112299 ↗
50. Rheology of poly(N-isopropylacrylamide)–clay nanocomposite hydrogels10.1021/ma502111p ↗
51. Study on the thermal stability of thermosensitive hydrogel10.1016/j.proeng.2016.01.162 ↗
52. Polyacrylamide gel beads for the recognitionof staphylococcal enterotoxin B10.1002/pat.3301 ↗
53. Interactions between macromolecules and ions: the Hofmeister series10.1016/j.cbpa.2006.09.020 ↗
54. Fast deswelling and highly extensible poly(N-isopropylacrylamide)-hectorite clay nanocomposite cryogels prepared by freezing polymerization10.1016/j.polymer.2013.02.008 ↗
55. Recent advances in nanostructured Sn−Ln mixed-metal oxides as sunlight-activated nanophotocatalyst for high-efficient removal of environmental pollutants10.1016/j.ceramint.2021.05.155 ↗
56. Preparation of nanocrystalline cubic ZrO2 with different shapes via a simple precipitation approach10.1007/s10854-015-4243-1 ↗
57. Facile route to synthesize zirconium dioxide (ZrO2) nanostructures: structural, optical and photocatalytic studies10.1016/j.molliq.2016.01.062 ↗
58. Nd2Zr2O7-Nd2O3 nanocomposites: new facile synthesis, characterization and investigation of photocatalytic behavior10.1016/j.matlet.2016.05.094 ↗
59. Eco-friendly synthesis of Nd2Sn2O7–based nanostructure materials using grape juice as green fuel as photocatalyst for the degradation of erythrosine10.1016/j.compositesb.2019.03.045 ↗
60. Green synthesis of dysprosium stannate nanoparticles using Ficus carica extract as photocatalyst for the degradation of organic pollutants under visible irradiation10.1016/j.ceramint.2019.11.072 ↗
61. Innovative construction of a novel lanthanide cerate nanostructured photocatalyst for efficient treatment of contaminated water under sunlight10.1016/j.jcis.2022.03.112 ↗