journal article·2024-05Open access

Structural fluctuations in thin cohesive particle layers in powder-based additive manufacturing

Sudeshna Roy, Hongyi Xiao, Vasileios Angelidakis, Thorsten Pöschel

Granular Matter· Volume 26· Issue 2

Abstract

Abstract Producing dense and homogeneous powder layers with smooth free surface is challenging in additive manufacturing, as interparticle cohesion can strongly affect the powder packing structure and therefore influence the quality of the end product. We use the Discrete Element Method to simulate the spreading process of spherical powders and examine how cohesion influences the characteristics of the packing structure with a focus on the fluctuation of the local morphology. As cohesion increases, the overall packing density decreases, and the free surface roughness increases, which is calculated from digitized surface height distributions. Local structural fluctuations for both quantities are examined through the local packing anisotropy on the particle scale, obtained from Voronoï tessellation. The distributions of these particle-level metrics quantify the increasingly heterogeneous packing structure with clustering and changing surface morphology.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Granular flow and fluidized beds · Pickering emulsions and particle stabilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Bhavar, V., Kattire, P., Patil, V., Khot, S., Gujar, K., Singh, R.: A review on powder bed fusion technology of metal additive manufacturing. In: Press, C.R.C. (ed.) Additive manufacturing handbook, pp. 251–253. CRC Press, New York (2017)10.1201/9781315119106-15 ↗
2. Vock, S., Klöden, B., Kirchner, A., Weißgärber, T., Kieback, B.: Powders for powder bed fusion: a review. Progr. Addit. Manuf. 4, 383–397 (2019)10.1007/s40964-019-00078-6 ↗
3. Chen, H., Sun, Y., Yuan, W., Pang, S., Yan, W., Shi, Y.: A review on discrete element method simulation in laser powder bed fusion additive manufacturing. Chin. J. Mech. Eng. Addit. Manuf. Front. 1, 100017 (2022)
4. Cunningham, R., Nicolas, A., Madsen, J., Fodran, E., Anagnostou, E., Sangid, M.D., Rollett, A.D.: Analyzing the effects of powder and post-processing on porosity and properties of electron beam melted Ti-6Al-4V. Mater. Res. Lett. 5(7), 516–525 (2017)10.1080/21663831.2017.1340911 ↗
5. Gong, H., Rafi, K., Gu, H., Ram, G.J., Starr, T., Stucker, B.: Influence of defects on mechanical properties of Ti-6Al-4 V components produced by selective laser melting and electron beam melting. Mater. Des. 86, 545–554 (2015)10.1016/j.matdes.2015.07.147 ↗
6. Mostafaei, A., Zhao, C., He, Y., Ghiaasiaan, S.R., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al.: Defects and anomalies in powder bed fusion metal additive manufacturing. Curr. Opin. Solid State Mater. Sci. 26(2), 100974 (2022)10.1016/j.cossms.2021.100974 ↗
7. Gordon, J.V., Narra, S.P., Cunningham, R.W., Liu, H., Chen, H., Suter, R.M., Beuth, J.L., Rollett, A.D.: Defect structure process maps for laser powder bed fusion additive manufacturing. Addit. Manuf. 36, 101552 (2020)
8. Parteli, E.J., Schmidt, J., Blümel, C., Wirth, K.-E., Peukert, W., Pöschel, T.: Attractive particle interaction forces and packing density of fine glass powders. Sci. Rep. 4(1), 6227 (2014)10.1038/srep06227 ↗
9. Fang, Q., Xiong, G., Zhou, M., Tamir, T.S., Yan, C.-B., Wu, H., Shen, Z., Wang, F.-Y.: Process monitoring, diagnosis and control of additive manufacturing. IEEE Trans. Autom. Sci. Eng. (2022) https://doi.org/10.1109/TASE.2022.321525810.1109/TASE.2022.3215258 ↗
10. Schmidt, J., Parteli, E.J., Uhlmann, N., Woerlein, N., Wirth, K.-E., Poeschel, T., Peukert, W.: Packings of micron-sized spherical particles-insights from bulk density determination. X-ray Microtomogr. Discr. Element Simulat. Adv. Powder Technol 31(6), 2293–2304 (2020)
11. Blümel, C., Parteli, E.J., Schmidt, J., Wirth, K.-E., Peukert, W., Pöschel, T.: Numerical study of the packing density of fine powders by means of the Discrete Element Method. In: 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics - GAMM 2014 (2014)
12. Nasato, D.S., Pöschel, T.: Influence of particle shape in additive manufacturing: Discrete element simulations of polyamide 11 and polyamide 12. Addit. Manuf. 36, 101421 (2020)
13. Shaheen, M.Y., Thornton, A.R., Luding, S., Weinhart, T.: The influence of material and process parameters on powder spreading in additive manufacturing. Powder Technol 383, 564–583 (2021)10.1016/j.powtec.2021.01.058 ↗
14. He, Y., Hassanpour, A., Bayly, A.E.: Combined effect of particle size and surface cohesiveness on powder spreadability for additive manufacturing. Powder Technol. 392, 191–203 (2021)10.1016/j.powtec.2021.06.046 ↗
15. Fouda, Y.M., Bayly, A.E.: A DEM study of powder spreading in additive layer manufacturing. Granular Matter 22, 1–18 (2020)10.1007/s10035-019-0971-x ↗
16. Haeri, S., Wang, Y., Ghita, O., Sun, J.: Discrete element simulation and experimental study of powder spreading process in additive manufacturing. Powder Technol. 306, 45–54 (2017)10.1016/j.powtec.2016.11.002 ↗
17. Chen, H., Wei, Q., Zhang, Y., Chen, F., Shi, Y., Yan, W.: Powder-spreading mechanisms in powder-bed-based additive manufacturing: experiments and computational modeling. Acta Mater. 179, 158–171 (2019)10.1016/j.actamat.2019.08.030 ↗
18. Meier, C., Weissbach, R., Weinberg, J., Wall, W.A., Hart, A.J.: Critical influences of particle size and adhesion on the powder layer uniformity in metal additive manufacturing. J. Mater. Process. Technol. 266, 484–501 (2019)10.1016/j.jmatprotec.2018.10.037 ↗
19. Meier, C., Weissbach, R., Weinberg, J., Wall, W.A., Hart, A.J.: Modeling and characterization of cohesion in fine metal powders with a focus on additive manufacturing process simulations. Powder Technol. 343, 855–866 (2019)10.1016/j.powtec.2018.11.072 ↗
20. He, Y., Hassanpour, A., Bayly, A.E.: Linking particle properties to layer characteristics: Discrete element modelling of cohesive fine powder spreading in additive manufacturing. Addit. Manuf. 36, 101685 (2020)
21. Zhang, J., Tan, Y., Bao, T., Xu, Y., Xiao, X., Jiang, S.: Discrete element simulation of the effect of roller-spreading parameters on powder-bed density in additive manufacturing. Materials 13(10), 2285 (2020)10.3390/ma13102285 ↗
22. Han, Q., Gu, H., Setchi, R.: Discrete element simulation of powder layer thickness in laser additive manufacturing. Powder Technol. 352, 91–102 (2019)10.1016/j.powtec.2019.04.057 ↗
23. Parteli, E.J., Pöschel, T.: Particle-based simulation of powder application in additive manufacturing. Powder Technol. 288, 96–102 (2016)10.1016/j.powtec.2015.10.035 ↗
24. Nasato, D.S., Briesen, H., Pöschel, T.: Influence of vibrating recoating mechanism for the deposition of powders in additive manufacturing: discrete element simulations of polyamide 12. Addit. Manuf. 48, 102248 (2021)
25. Parteli, E.J., Pöschel, T.: Particle-based simulations of powder coating in additive manufacturing suggest increase in powder bed roughness with coating speed. EPJ Web Conf. 140, 15013 (2017)10.1051/epjconf/201714015013 ↗
26. Phua, A., Smith, J., Davies, C.H., Cook, P.S., Delaney, G.W.: Understanding the structure and dynamics of local powder packing density variations in metal additive manufacturing using set voronoi analysis. Powder Technol. 418, 118272 (2023)10.1016/j.powtec.2023.118272 ↗
27. Rieser, J.M., Goodrich, C.P., Liu, A.J., Durian, D.J.: Divergence of voronoi cell anisotropy vector: a threshold-free characterization of local structure in amorphous materials. Phys. Rev. Lett. 116(8), 088001 (2016)10.1103/PhysRevLett.116.088001 ↗
28. Richard, D., Ozawa, M., Patinet, S., Stanifer, E., Shang, B., Ridout, S., Xu, B., Zhang, G., Morse, P., Barrat, J.-L., et al.: Predicting plasticity in disordered solids from structural indicators. Phys. Rev. Mater. 4(11), 113609 (2020)
29. Xiao, H., Ivancic, R.J., Durian, D.J.: Strain localization and failure of disordered particle rafts with tunable ductility during tensile deformation. Soft Matter 16(35), 8226–8236 (2020)10.1039/D0SM00839G ↗
30. Harrington, M., Durian, D.J.: Anisotropic particles strengthen granular pillars under compression. Phys. Rev. E 97(1), 012904 (2018)10.1103/PhysRevE.97.012904 ↗
31. Harrington, M., Xiao, H., Durian, D.J.: Stagnant zone formation in a 2D bed of circular and elongated grains under penetration. Granular Matter 22, 1–9 (2020)10.1007/s10035-019-0981-8 ↗
32. Mussatto, A., Groarke, R., O’Neill, A., Obeidi, M.A., Delaure, Y., Brabazon, D.: Influences of powder morphology and spreading parameters on the powder bed topography uniformity in powder bed fusion metal additive manufacturing. Addit. Manuf. 38, 101807 (2021)
33. Chen, H., Chen, Y., Liu, Y., Wei, Q., Shi, Y., Yan, W.: Packing quality of powder layer during counter-rolling-type powder spreading process in additive manufacturing. Int. J. Mach. Tools Manuf. 153, 103553 (2020)10.1016/j.ijmachtools.2020.103553 ↗
34. Nan, W., Pasha, M., Bonakdar, T., Lopez, A., Zafar, U., Nadimi, S., Ghadiri, M.: Jamming during particle spreading in additive manufacturing. Powder Technol. 338, 253–262 (2018)10.1016/j.powtec.2018.07.030 ↗
35. Angelidakis, V., Nadimi, S., Utili, S.: SHape analyser for particle engineering (SHAPE): seamless characterisation and simplification of particle morphology from imaging data. Comput. Phys. Commun. 265, 107983 (2021)10.1016/j.cpc.2021.107983 ↗
36. Weinhart, T., Orefice, L., Post, M., van Schrojenstein Lantman, M.P., Denissen, I.F., Tunuguntla, D.R., Tsang, J., Cheng, H., Shaheen, M.Y., Shi, H., et al.: Fast, flexible particle simulations-an introduction to MercuryDPM. Comput. Phys. Commun. 249, 107129 (2020)10.1016/j.cpc.2019.107129 ↗
37. Roy, S., Shaheen, M.Y., Pöschel, T.: Effect of cohesion on structure of powder layers in additive manufacturing. Granular Matter 25(4), 68 (2023)10.1007/s10035-023-01349-4 ↗
38. Roy, S., Xiao, H., Shaheen, M.Y., Pöschel, T.: Local structural anisotropy in particle simulations of powder spreading in additive manufacturing. In: Casablanca International Conference on Additive Manufacturing, Springer, pp. 139–149 (2022)10.1007/978-3-031-32927-2_13 ↗
39. Mindt, H., Megahed, M., Lavery, N., Holmes, M., Brown, S.: Powder bed layer characteristics: the overseen first-order process input. Metall. Mater. Trans. A 47, 3811–3822 (2016)10.1007/s11661-016-3470-2 ↗
40. Thornton, C., Cummins, S.J., Cleary, P.W.: An investigation of the comparative behaviour of alternative contact force models during inelastic collisions. Powder Technol. 233, 30–46 (2013)10.1016/j.powtec.2012.08.012 ↗
41. Thornton, C.: Granular dynamics, contact mechanics and particle system simulations, a DEM study. Part. Technol. Ser. 24, 1024 (2015)
42. Müller, P., Pöschel, T.: Collision of viscoelastic spheres: compact expressions for the coefficient of normal restitution. Phys. Rev. E 84(2), 021302 (2011)
43. Mindlin, R.D.: Compliance of elastic bodies in contact. J. Appl. Mech. 16, 259–268 (1949). https://doi.org/10.1115/1.4009973. (https://asmedigitalcollection.asme.org/appliedmechanics/article/16/3/259/1106367/Compliance-of-Elastic-Bodies-in-Contact)10.1115/1.4009973 ↗
44. Johnson, K.L., Kendall, K., Roberts, A.: Surface energy and the contact of elastic solids proceedings of the royal society of London A. Math. Phys. Sci. 324(1558), 301–313 (1971)
45. Hamaker, H.C.: The London-van der Waals attraction between spherical particles. Physica 4(10), 1058–1072 (1937)10.1016/S0031-8914(37)80203-7 ↗
46. Eggersdorfer, M., Kadau, D., Herrmann, H.J., Pratsinis, S.E.: Fragmentation and restructuring of soft-agglomerates under shear. J. Colloid Interf. Sci. 342(2), 261–268 (2010)10.1016/j.jcis.2009.10.062 ↗
47. Smilauer, V., Angelidakis, V., Catalano, E., Caulk, R., Chareyre, B., Chèvremont, W., Dorofeenko, S., Duriez, J., Dyck, N., Elias, J., Er, B., Eulitz, A., Gladky, A., Guo, N., Jakob, C., Kneib, F., Kozicki, J., Marzougui, D., Maurin, R., Modenese, C., Pekmezi, G., Scholtès, L., Sibille, L., Stransky, J., Sweijen, T., Thoeni, K., Yuan, C.: Yade Documentation 3rd ed., The Yade Project, (2021). http://yade-dem.org/doc/
48. Strobl, S., Formella, A., Pöschel, T.: Exact calculation of the overlap volume of spheres and mesh elements. J. Computat. Phys. 311, 158–172 (2016)10.1016/j.jcp.2016.02.003 ↗
49. Cook, R.D., et al.: Concepts and applications of finite element analysis. Wiley, New Jersey (2007)
50. Ma, Y., Evans, T.M., Philips, N., Cunningham, N.: Numerical simulation of the effect of fine fraction on the flowability of powders in additive manufacturing. Powder Technol. 360, 608–621 (2020)10.1016/j.powtec.2019.10.041 ↗
51. ISO25178, Geometrical product specifications (GPS) – Surface texture: Areal. Part 2: Terms, definitions and surface texture parameters, Standard, International Organization for Standardization (2022)
52. Pinkall, U., Polthier, K.: Computing discrete minimal surfaces and their conjugates. Exper. Math. 2(1), 15–36 (1993)10.1080/10586458.1993.10504266 ↗
53. Chen, R., Xu, Y., Gotsman, C., Liu, L.: A spectral characterization of the delaunay triangulation. Comput. Aided Geomet. Des. 27(4), 295–300 (2010)10.1016/j.cagd.2010.02.002 ↗
54. Ye, Z., Yi, R., Gong, W., He, Y., Liu, Y.-J.: Dirichlet energy of delaunay meshes and intrinsic delaunay triangulations. Comput-Aided Des. 126, 102851 (2020)
55. Schaller, F.M., Kapfer, S.C., Evans, M.E., Hoffmann, M.J., Aste, T., Saadatfar, M., Mecke, K., Delaney, G.W., Schröder-Turk, G.E.: Set voronoi diagrams of 3d assemblies of aspherical particles. Philosoph. Magaz. 93(31–33), 3993–4017 (2013)10.1080/14786435.2013.834389 ↗