journal article·2015-02Open access

Intergranular pore space evolution in MX80 bentonite during a long-term experiment

Lukas M. Keller, Lorenz Holzer, Philippe Gasser, Rolf Erni, Marta D. Rossell

Abstract

Focused ion beam nanotomography (FIB-nt) was applied to MX80 bentonite samples from the long-term Alternative Buffer Material (ABM) experiment in order to study the evolution of the intergranular pore space under similar condition that is supposed to prevail in repositories of nuclear waste. The applied high-resolution imaging method revealed the presence of two different types of pore filler. The first type is related to corrosion of iron and is represented by newly formed heavy minerals. Extensive formation of heavy minerals occurred only near the iron parts of the experimental set up. Based on comparison with other studies, the second filler type was interpreted as clay-gel that was likely formed during water uptake and swelling. A large fraction of the initial pore space was filled with such a clay gel. By attributing filled pores to the present open porosity, the initial intergranular porosity (radii > 10 nm) of the starting material was in the range of 4.3–4.6 vol.%, which was reduced to < 1 vol.% during the experiment. A finite scaling approach was applied to the initial pore space (i.e. pores with radii > 10 nm), which yielded percolation thresholds with critical porosities ϕ in the range of 3–19 vol.%. Thus, the residual open porosity was far below the percolation threshold. The initial porosity of one sample was above the percolation threshold, but also in this material percolation was restricted to one spatial direction. This indicated anisotropy with respect to percolation. The formation of a clay-gel and heavy minerals led to a decrease in intergranular porosity, which in turn affected connectivity of the pore network. Using results from pore-network modelling in combination with percolation theory illustrates that a minor reduction of porosity led to a substantial decrease in pore connectivity. Depending on water saturation within the observed intergranular pore space, air permeability decreases exponentially over three to four orders of magnitude within a narrow porosity range of about 1 vol.%. Based on observations and calculations, gas transport along the intergranular pore space of MX80 bentonite from the ABM experiment is not considered as a possible scenario and can reasonably be excluded.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Enhanced Oil Recovery Techniques · Soil and Unsaturated Flow · Groundwater flow and contamination studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Physics of water and ice: implications for cryofixations
2. Bhuiyan · 2013
3. Percolation I
4. Gas migration from accumulation to surface
5. Pore-network extraction from micro-computerized-tomography images
6. Eng · 2007
7. Gas migration in KSB-3 buffer bentonite
8. Geometric and dielectric characterization of porous media10.1103/PhysRevB.44.60 ↗
9. Three-dimensional analysis of porous BaTiO3 ceramics using FIB nanotomography10.1111/j.0022-2720.2004.01397.x ↗
10. 3D-microstructure analysis of hydrated bentonite with cryo-stabilized pore water10.1016/j.clay.2009.11.045 ↗
11. Basic transport properties in natural porous media
12. 3D geometry and topology of pore pathways in Opalinus Clay: implications for mass transport10.1016/j.clay.2011.02.003 ↗
13. Pore-space relevant for gas permeability in Opalinus Clay: statistical analysis of homogeneity, percolation and representative volume element (RVE)10.1002/jgrb.50228 ↗
14. Characterization of multi-scale microstructural features in Opalinus Clay10.1016/j.micromeso.2012.11.029 ↗
15. The pore structure of compacted and partly saturated MX-80 bentonite at different dry densities10.1346/CCMN.2014.0620302 ↗
16. Physical and chemical stability of the bentonite buffer
17. Characterisation of gas transport properties of the Opalinus Clay, potential host rock formation for radioactive waste disposal10.2516/ogst:2005008 ↗
18. Mineralogical investigations of the interaction between iron corrosion products and bentonite from the NF-PRO Experiments (Phase 2)
19. Contraticting geometrical concepts in pore size analyzes attained with electron microscopy and mercury intrusion10.1111/j.1551-2916.2008.02736.x ↗
20. A threshold selection method from gray-level histograms10.1109/TSMC.1979.4310076 ↗
21. Hydration behavior of MX80 bentonite in a confined-volume-system: implications for backfill design10.1346/CCMN.2011.0590609 ↗
22. Pore-space percolation in sea ice single crystals10.1029/2008JC005145 ↗
23. The microstructure of MX80 clay with respect to its bulk physical properties under different environmental conditions
24. GMM — a general microstructural model for qualitative and quantitative studies of smectite calys
25. Stauffer · 1995
26. Alternative buffer material, status of the ongoing laboratory investigation of reference materials and test package 1
27. Analysis of microstructural images of dry and water-saturated compacted bentonite samples observed with X-ray micro CT10.1016/j.clay.2008.09.001 ↗
28. The microstructure of dilute clay and humic acid suspensions revealed by freeze-fracture electron microscopy: discussion10.1346/CCMN.1992.0400517 ↗
29. Predictive pore-scale modeling of two-phase flow in mixed wet media10.1029/2003WR002627 ↗
30. Interaction of corroding iron with bentonite at repository conditions. Goldschmidt abstracts