Thin films of layered double hydroxide and silver-doped polystyrene particles

Abstract Monodisperse polystyrene latex dispersions containing particles with 55 nm (PS 55 ) and 560 nm (PS 560 ) average diameters were synthesized by emulsion polymerization. The surface of the PS 55 latices was modified with sodium styrene sulfonate as co-monomer and styrene (PS 55 –SO 3 − ). The maximal adsorbed amount of the silver ion was 37.6 mg/g (0.348 mmol/g) on the surface of the PS 55 –SO 3 − spheres. Silver nanoparticles (NPs) were prepared on the surface of PS 55 –SO 3 − and PS 560 by chemical reduction. TEM images verified the presence of silver NPs on the surface of the polymer latex particles as well as free in the dispersion. The mean particle size of the silver-dotted PS 55 –SO 3 − seed decreased with increasing silver content. The plasmon resonance peak of silver-modified latex particles shifted to smaller wavelengths with increasing silver content with 11 nm in Ag 0 /PS 560 and with 17 nm in Ag 0 /PS 55 –SO 3 − dispersions. Thin films were prepared by the layer-by-layer (LbL) deposition from negatively charged PS 55 –SO 3 − or PS 560 and positively charged lamellar colloidal particles of 2:1 MgAl-layered double hydroxide (LDH). Film formation was detected by optical methods. The absorbance maxima of LDH∣Ag 0 /PS 55 –SO 3 − thin films at 7.45 ⁎ 10 − 2 or 1.49 ⁎ 10 − 1 Ag/PS ratios appeared at 390 nm. The wavelength of the absorbance maximum of the LDH∣Ag 0 –PS 560 thin films shifted from 393 nm to 382 nm with increasing silver content. The film thicknesses of the LDH∣Ag 0 –PS 55 –SO 3 − films are in the 200–955 nm range. The thickness varies from 183 to 417 nm for the LDH∣Ag 0 –PS 560 LbL films depending on the Ag content. The average roughness values of the LDH∣Ag 0 /PS 560 films are 28 and 37 nm, while 16 and 19 nm for the LDH∣Ag 0 /PS 55 –SO 3 − films, respectively.