α-Cristobalite formation in ceramic tile and sewage pipe bodies derived from Westerwald ball clay and its effect on elastic-properties
Source abstract
Abstract
Abstract The formation of α-cristobalite and its effect on the elastic modulus (E modulus) was investigated in sewage pipe (SP) and tile bodies derived from Westerwald ball clay (WBC), employing the results of previous research on WBC as a baseline. In this study, the SP and tile bodies derived from WBC are compared with the bodies derived from two residual Turkish kaolin and one Turkish ball clay, resulting in four sources of α-cristobalite formation: tile, SP, residual kaolin and ball clay. The crystallization of α-cristobalite in the fired WBC results from two primary pathways. The first pathway occurs as a devitrification product from the glass phase saturated with excess silica, which is typically present in ball clay after ≥1100 °C; the second pathway results from a minor amount of transformation of peripheries of quartz crystals, firing at over ≥1200°. In addition to these two sources, other α-cristobalite sources for sewage-pipe bodies include smectitic clay and chamotte (prefired clay) addition. Conversely, no α-cristobalite occurred in tile mixture bodies containing ≈2 wt% potassium oxide (K2O). The α-cristobalite phase only forms in kaolinite-rich ball clay when K2O content is less than ≈2 wt% because devitrification of excess silica phase of tile bodies is primarily governed by K2O content. The ≈2 wt% K2O ratio inhibited α-cristobalite formation in tile bodies, while the same percentage or greater of K2O content in SP bodies did not inhibit the α-cristobalite formation due to the presence of chamotte and smectitic clay in the SP mixture. The measured minimum E moduli were attributed to cristobalite formations because of chamotte and smectitic clay additions to SP bodies. In the bodies derived from Turkish residual kaolin at over 1000 °C, the opaline and chalcedonic silica phase are transformed to α-cristobalite at a lower temperature than those observed for rock crystal quartz and Si-rich glassy phase in WBC bodies. Thus, determining the different α-cristobalite sources in clay-based ceramic bodies derived from either the ball clay, the residual kaolin or the bodies containing smectitic clay together with chamotte provides the essential pre-condition for the optimum admixing ratio in industrial SP and tile bodies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Glass properties and applications · Nuclear materials and radiation effects
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. Na-feldspar (F) and kaolinite (K) system at high temperature: resulting phase composition. Micro-structural features and mullite-glass Gibbs energy of formation, as a function of F/K ratio and kaolinite crystallinity10.1016/j.jeurceramsoc.2013.06.003 ↗
2. Non-destructive determination of youngs modulus and its relationship with compressive strength, porosity, and density10.1144/GSL.SP.1987.029.01.06 ↗
3. Antoni · 2005 · vol. 42 · 290
4. The change of phase composition in kaolinite- and illite-rich clay-based ceramic bodies10.1016/j.clay.2003.08.012 ↗
5. The difference between alkaline and alkaline earth effects on high-temperature phase change of clay-based ceramic10.1016/j.clay.2018.04.029 ↗
6. Evaluation of selected kaolin clays a raw material for the Turkish cement and concrete industry10.1180/claymin.2007.042.2.08 ↗
7. ASTM, E1876-09 · 2009
8. Relationship between microstructure and mechanical properties in fully vitrified stoneware
9. Mineralogy and sedimentation of recent deep sea clay in the Atlantic Ocean and adjacent seas10.1130/0016-7606(1965)76[803:MASORD]2.0.CO;2 ↗
10. A new approach for the young's modulus-porosity correlation of ceramic materials10.1016/S0272-8842(96)00033-8 ↗
11. Design and development of a chamotte for use in a low-clay translucent whiteware10.1016/S0955-2219(03)00359-5 ↗
12. Porcelain raw materials. processing phase evolution and mechanical behavior10.1111/j.1151-2916.1998.tb02290.x ↗
13. The influence of microstructure on the performance of white porcelain stoneware10.1016/j.ceramint.2003.11.002 ↗
14. Chakraborty · 2003 · 398 · 203
15. Stress-induced β→α-cristobalite phase transformation in (Na2O+Al2O3)-codoped silica10.1016/S0921-5093(01)01703-8 ↗
16. Mineralogical and ceramic properties of refractoryclays from Central Missouri (USA)10.1016/0169-1317(95)00004-N ↗
17. Creation of microcracks in porcelain during firing10.1016/j.jeurceramsoc.2011.05.045 ↗
18. Saponite from the Emet Colemanite Mines. Kütahya. Turkey10.1346/CCMN.2000.0480401 ↗
19. X-ray diffraction and 29 Si magic-angle-spinning NMR of opals incoherent long- and short-range order in opal-CT
20. Trends in the formation of crystalline and amorphous phases during the firing of clay bricks
21. Calcination-induced changes in structure, morphology, and porosity of allophane10.1016/j.clay.2018.03.035 ↗
22. High-temperature transformation in kaolinite: the role of the crystallinity and the firing atmosphere10.1016/0169-1317(95)00030-8 ↗
23. Alteration of volcanic rocks and genesis of kaolin deposits in the Şile region, northern İstanbul. Turkey: Clay Mineralogy10.1346/CCMN.2003.0510610 ↗
24. Distinguishing well-ordered opal-CT and opal-C from high-temperature cristobalite by X-ray diffraction10.1016/0003-2670(94)80182-7 ↗
25. The Ukrainian clay mining industry and its effect on the European ceramic raw materials market
26. Some Kaolin Deposits in the West Anatolia Province
27. Databook of the ceramic raw material of selected areas in Turkey
28. Influence of mineralogical composition of applied ball clays on properties of porcelain tiles10.1016/j.ceramint.2010.10.014 ↗
29. Thermal activation of a pure montmorillonite clay and its reactivity in cementitious systems10.1021/jp502529d ↗
30. High-temperature phases from kaolinite and halloysite
31. Kinetic study of the kaolinitemullite reaction sequence. Part II: Mullite formation10.1007/BF00202254 ↗
32. Guggenheim · 2001 · 389
33. X-ray diffraction and electron optical studies on smectite and α-cristobalite associations10.1346/CCMN.1972.0200207 ↗
34. Proposed fracture theory of dispersion-strengthened glass matrix10.1111/j.1151-2916.1966.tb13210.x ↗
35. Routine and ancient silica sinters10.1016/S0375-6505(99)00054-1 ↗
36. Thermal behavior of samarium oxide –Ball clay mixtures for high macroscopic neutron capture cross section ceramic materials10.1016/j.clay.2018.10.010 ↗
37. Hilier · 1978 · 43 · 477
38. Fired porcelain microstructure revisited10.1111/j.1151-2916.1999.tb02282.x ↗
39. Role of impurities in the formation of mullite from kaolinite and Al2O3–SiO2 mixtures
40. The nature of opal. I. Nomenclature and constituent phases10.1080/00167617108728743 ↗
41. Characterization of silica polymorphs in kaolins by X-ray diffraction before and after phosphoric acid digestion and thermal treatment10.1016/j.aca.2005.07.045 ↗
42. Flint clays and a flint clay facies10.1346/CCMN.1968.0160202 ↗
43. Kromer · 1968 · 69
44. Kromer · 1980 · 69
45. Sintering effects on the development of mechanical properties of ired clay ceramics10.1016/j.msea.2007.07.068 ↗
46. Phase transformation sequence from kaolinite to mullite investigated by an energy-filtering transmission electron microscope10.1111/j.1151-2916.1999.tb02165.x ↗
47. Lemmens · 1990
48. Structural analysis of the transition phases in the kaolinite-mullite thermal sequence
49. Effects of different potassium salts on the formation of mullite as the only crystal phase in kaolinite10.1016/j.jeurceramsoc.2009.04.032 ↗
50. Lundin · 1964 · 257
51. Development of High-Strength Whiteware Bodies10.1016/0955-2219(96)00033-7 ↗
52. Effect of firing temperature on sintering of porcelain stoneware tiles10.1016/j.ceramint.2007.06.006 ↗
53. Mechanical strength of porcelain10.1111/j.1151-2916.1957.tb12626.x ↗
54. Exploration and appraisal of plastic sedimentary clays for the fine ceramics industry10.1016/S0169-1317(96)00029-4 ↗
55. Okut · 1975 · 1233
56. Okut · 1978
57. Differentiation of α-cristobalite from opals in bentonites from Turkey10.1016/j.clay.2006.07.003 ↗
58. Time-temperature transformation curves and the thermal decomposition reactions of kaolinite Mat10.4028/www.scientific.net/MSF.7.73 ↗
59. Effect of porosity on Young's modulus of a porcelain
60. Prediction of the elastic moduli of composites10.1111/j.1151-2916.1968.tb11914.x ↗
61. Effects of grinding and firing treatment on the crystalline and glass content and physical properties of whiteware bodies10.1111/j.1151-2916.1951.tb11624.x ↗
62. Schuller · Ber. Deut. Keram. Ges. · 1963 · 40 · 320
63. High temperature phases from impure kaolinite
64. Thermomechanical analysis of quartz porcelain in temperature cycles10.1016/j.ceramint.2006.04.024 ↗
65. Microstructural evolution in clay-based ceramics I: single components and binary mixtures of clay, flux, and quartz filler10.1111/j.1551-2916.2008.02393.x ↗
66. Thorez · 1976 · 42
67. Determination of quartz in refractory clays10.1111/j.1151-2916.1940.tb14187.x ↗
68. Effect of a calcined Westerwald bentonite as supplementary cementitious material on the long-term performance of concrete10.1016/j.clay.2018.10.015 ↗
69. Fundamental study of crystalline and glassy phases in whiteware bodies10.1111/j.1151-2916.1949.tb18965.x ↗
70. Vandenberghe · 1978
71. Phase transformations in silica-alumina mixtures as examined by continuous X-ray diffraction
72. Comparison of the strength of triaxial porcelain containing alumina and silica10.1111/j.1151-2916.1967.tb15128.x ↗
73. The constitution
74. Yılmaz · 2012
75. The vitreous phase of porcelain stoneware: composition, evolution during sintering and physical properties10.1016/j.jnoncrysol.2011.05.020 ↗
76. Influence of quartz and muscovite on the formation of mullite from kaolinite
77. “Zur Frage der Chemischem und Physikalischen Natur der Porzellans” (“some Chemical and Physical Properties of Porcelains”)