Effects of palygorskite on physical properties and mechanical performances of bone china
Source abstract
Abstract
Abstract In this work, the palygorskite with different contents upto 6 mass% was added into bone china bodies in order to improve the flexural strength, fracture toughness and thermal shock resistance of bodies. The phase composition and microstructure were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Moreover, the physical properties and mechanical performance of bone china were also studied. Results showed that the sintering temperature and thermal expansion coefficient (TEC) of bone china decreased with the increase of the addition amount of palygorskite. Specifically, adding 2 and 4 mass% palygorskite could improve the three-point flexural strength of bone china from 113 to 125.3 MPa and the fracture toughness from 2.11 to 2.21 MPa·m1/2, respectively. However, the flexural strength and fracture toughness of bone china were decreased along with the further increase of palygorskite addition. Moreover, the thermal shock resistance of bone china was improved from 160 °C to 180 °C via adding the palygorskite. The above findings provided a low-cost, simple and eco-friendly technique to improve the flexural strength, fracture toughness and thermal shock resistance of bone china.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Recycling and utilization of industrial and municipal waste in materials production · Clay minerals and soil interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials10.1016/S0927-796X(00)00012-7 ↗
2. Poly(vinyl alcohol) nanocomposites with sepiolite and heat-treated sepiolites10.1002/app.29830 ↗
3. Titania-sepiolite nanocomposites prepared by a surfactant templating colloidal route10.1021/cm702251f ↗
4. Fracture toughness of bone china and hard porcelain10.1179/bct.2001.100.6.256 ↗
5. Adsorption of bisphenol A and ciprofloxacin by palygorskite-montmorillonite: Effect of granule size, solution chemistry and temperature10.1016/j.clay.2016.07.023 ↗
6. A view of whitewares mechanical strength and microstructure10.1016/S0272-8842(02)00234-1 ↗
7. Elimination of discolouration in reformulated bone china bodies10.1016/j.jeurceramsoc.2004.07.008 ↗
8. Bone China formulated with waste glass10.1179/1743676112Y.0000000065 ↗
9. Investigation of spodumene-bearing rock as a flux for bone China production10.1590/S1516-14392013005000143 ↗
10. The effect of surface modification of palygorskite on the morphology, mechanical, and thermal properties of Nylon 6/Palygorskite nanocomposites prepared by melt compounding
11. Atomic force microscopy of transformation toughening in ceria-stabilized zirconia10.1016/j.jeurceramsoc.2004.07.029 ↗
12. How can nanohybrids enhance polyester/sepiolite nanocomposite properties?10.1002/macp.200700335 ↗
13. Bending strength of porcelains10.1016/S0272-8842(01)00068-2 ↗
14. On the nature and location of nanoparticulate iron phases and their precursors synthesized within a sepiolite matrix10.1021/jp077173w ↗
15. Stabilization of superparamagnetic nickel nanoparticles in a sepiolite matrix10.1007/s11051-009-9811-y ↗
16. Nanocomposites of PLA and PCL based on montmorillonite and sepiolite10.1016/j.msec.2008.11.005 ↗
17. Comparing the effect of nanofillers as thermal stabilizers in low density polyethylene10.1016/j.polymdegradstab.2008.10.011 ↗
18. On the chemical composition of sepiolite and palygorskite10.1346/CCMN.2010.0580101 ↗
19. Effects of MgO addition on vitrification process of bone china body
20. Microstructural evolution in bone china10.1179/096797800680938 ↗
21. PVDF/palygorskite composite ultrafiltration membranes with enhanced abrasion resistance and flux10.1016/j.memsci.2015.08.011 ↗
22. Interactions between an ABS type leadless glaze and a biscuit fired bone China body during glost firing. Part I: preparation of experimental phases10.1016/S0955-2219(01)00419-8 ↗
23. Dolomite, wollastonite and calcite as different CaO sources in anorthite-based porcelain10.1016/j.ceramint.2012.11.091 ↗
24. Effect of firing temperature on bending strength of porcelains for tableware10.1111/j.1151-2916.1992.tb07200.x ↗
25. Mechanical properties and microstructure of 3D orthogonal quartz fiber reinforced silica composites fabricated by silicasol-infiltration-sintering10.1016/j.matdes.2011.11.022 ↗
26. Adsorption of phosphate by acid-modified fly ash and palygorskite in aqueous solution: Experimental and modeling10.1016/j.clay.2016.06.028 ↗
27. Spark plasma sintering of ZrO2 fiber toughened ZrB2-based ultra-high temperature ceramics10.1016/j.ceramint.2015.04.148 ↗
28. Effect of MnO2 polymorphs structure on the selective catalytic reduction of NOx with NH3 over TiO2–Palygorskite10.1016/j.cej.2015.10.079 ↗
29. Size-controlled synthesis of palygorskite/Ag3PO4 nanocomposites with enhanced visible-light photocatalytic performance10.1016/j.clay.2017.04.004 ↗
30. Development of high-strength whiteware bodies10.1016/0955-2219(96)00033-7 ↗
31. New titania-clay nanostructured porous materials10.1016/j.micromeso.2009.12.031 ↗
32. Effect of ageing on the mechanical properties and the residual stress distribution of hybrid clay–glass fibre-polypropylene injection mouldings10.1007/s10853-009-3733-z ↗
33. Effect of chemical modification of palygorskite and sepiolite by 3-aminopropyltriethoxisilane on adsorption of cationic and anionic dyes10.1016/j.clay.2016.10.022 ↗
34. Phase analysis and microstructure evolution of a bone china body modified with scrap addition10.1016/j.ceramint.2011.01.038 ↗
35. Fe2O3–palygorskite nanoparticles, efficient adsorbates for pesticide removal10.1016/j.clay.2015.07.026 ↗
36. Monodisperse and corrosion-resistant metallic nanoparticles embedded into sepiolite particles for optical and magnetic applications10.1111/j.1551-2916.2006.01190.x ↗
37. Synthesis, conforming, linear, and non-linear optical properties of gold nanoparticles-sepiolite compacts10.1007/s11468-009-9101-7 ↗
38. Reinforcement of bone china by the addition of sepiolite nano-fibers10.1016/j.ceramint.2016.05.140 ↗
39. Functionalizing inorganic solids: towards organic–inorganic nanostructured materials for intelligent and bio-inspired systems10.1002/tcr.10054 ↗
40. Organic–inorganic materials: from intercalations to devices
41. Organic/polymeric interactions with clays
42. UV-cured epoxy coating reinforced with sepiolite as inorganic filler10.1007/s10853-009-3421-z ↗
43. Orange II adsorption on palygorskites modified with alkyl trimethylammonium and dialkyl dimethylammonium bromide — an isothermal and kinetic study10.1016/j.clay.2010.11.032 ↗
44. Influence of the particle morphology on the micro- and macromechanics of nano-reinforced materials10.1557/PROC-856-B4.4 ↗
45. Adsorption and photocatalytic degradation of tetracycline hydrochloride using a palygorskite-supported Cu2O–TiO2 composite10.1016/j.clay.2015.10.033 ↗
46. Palygorskite supported BiVO4 photocatalyst for tetracycline hydrochloride removal10.1016/j.clay.2016.12.035 ↗
47. Polymer/layered nanocomposites: a review from preparation to processing10.1016/j.progpolymsci.2003.08.002 ↗
48. Effects of SiC whiskers on the mechanical properties and microstructure of SiC ceramics by reactive sintering10.1016/j.ceramint.2017.02.095 ↗
49. Advances in the crystal chemistry of sepiolite and palygorskite10.1016/B978-0-444-53607-5.00002-5 ↗
50. Sepiolite-palygorskite: a continuous polysomatic series10.1346/CCMN.2013.0610505 ↗
51. New TiO2 monolithic supports based on the improvement of the porosity10.1016/j.cattod.2005.06.019 ↗
52. Optimization of a ductile-particle-toughened ceramic10.1111/j.1151-2916.1996.tb09036.x ↗
53. Surface modified palygorskite nanofibers and their applications as reinforcement phase in cis-polybutadiene rubber nanocomposites10.1016/j.clay.2016.06.003 ↗
54. Preparation and cyclic utilization assessment of palygorskite/carbon composites for sustainable efficient removal of methyl violet10.1016/j.clay.2018.04.039 ↗
55. From waste hot-pot oil as carbon precursor to development of recyclable attapulgite/carbon composites for wastewater treatment
56. One-step synthesis of magnetic attapulgite/carbon supported NiFe-LDHs by hydrothermal process of spent bleaching earth for pollutants removal10.1016/j.jclepro.2017.10.181 ↗
57. The preparation of magnetic nanoparticles for applications in biomedicine10.1088/0022-3727/36/13/202 ↗
58. Ag (I)-triggered one-pot synthesis of Ag nanoparticles onto natural nanorods as a multifunctional nanocomposite for efficient catalysis and adsorption10.1016/j.jcis.2016.03.058 ↗
59. Carbon/Attapulgite composites as recycled palm oil-decoloring and dye adsorbents10.3390/ma11010086 ↗
60. Mechanical behaviour of a low-clay translucent whiteware10.1016/j.jeurceramsoc.2004.10.019 ↗
61. 1996
62. Synthesis and characterization of soy polyol-based polyurethane nanocomposites reinforced with silylated palygorskite10.1016/j.clay.2014.08.009 ↗
63. Preparation and characterization of phenolic composites reinforced by the attapulgite nanoparticles10.1080/10601325.2015.996943 ↗
64. From naturally low-grade palygorskite to hybrid silicate adsorbent for efficient capture of Cu (II) ions10.1016/j.clay.2016.07.013 ↗
65. Insights into the relationship between the color and photocatalytic property of attapulgite/CdS nanocomposites10.1016/j.apsusc.2018.01.054 ↗
66. Low-cost bismuth yellow hybrid pigments derived from attapulgite10.1016/j.dyepig.2017.10.041 ↗
67. Structural evolution and property of hot-pressed palygorskite clay10.1080/0371750X.2015.1049711 ↗
68. Analysis of the mechanical properties in short carbon fiber-toughened ZrB2-SiC ultra-high temperature ceramic10.1177/0021998309346545 ↗
69. Effect of Al2O3 addition on the flexural strength and light-transmission properties of bone china10.1111/ijac.12296 ↗
70. A comparative study about adsorption of natural palygorskite for methylene blue10.1016/j.cej.2014.10.009 ↗
71. Fabrication and characterization of bone China using synthetic bone powder as raw materials10.1016/j.ceramint.2016.06.131 ↗
72. Mechanical and thermal properties of palygorskite poly (butylene succinate) nanocomposite10.1016/j.clay.2015.07.022 ↗
73. Phase transformation and morphology evolution of sepiolite fibers during thermal treatment10.1016/j.clay.2017.03.042 ↗
74. Mixture of palygorskite and montmorillonite (Paly-Mont) and its adsorptive application for mycotoxins10.1016/j.clay.2016.03.012 ↗
75. Novel strategy for palygorskite/poly (acrylic acid) nanocomposite hydrogels from bi-functionalized palygorskite nanorods as easily separable adsorbent for cationic basic dye10.1016/j.clay.2015.12.020 ↗
76. Effect of acid activation of palygorskite on their toluene adsorption behaviors10.1016/j.clay.2017.07.019 ↗