A medial axis based method for irregular grain shape representation in DEM simulations
Source abstract
Abstract
This paper describes a novel method for representing arbitrary grain shapes in discrete element method (DEM) simulations. The method takes advantage of the efficient sphere contact treatment in DEM and approximates the overall grain shape by combining a number of overlapping spheres. The method is based on the medial axis transformation, which defines the set of spheres needed for total grain reconstruction. This number of spheres is then further diminished by selecting only a subset of reconstructing spheres and opting for a grain approximation rather than a full grain reconstruction. The effects of the grain approximating parameters on the key geometrical features of the grains and the overall mechanical response of the granular medium are monitored by an extensive sensitivity analysis. The results of DEM quasi-static oedometric compression on a granular sample of approximated grains exhibit a high level of accuracy even for a small number of spheres.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Granular flow and fluidized beds · Landslides and related hazards · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Ai, J., Chen, J.F., Rotter, J.M., Ooi, J.Y.: Assessment of rolling resistance models in discrete element simulations. Powder Technol. 206(3), 269–282 (2011)10.1016/j.powtec.2010.09.030 ↗
2. Albaba, A., Lambert, S., Nicot, F., Chareyre, B.: Relation between microstructure and loading applied by a granular flow to a rigid wall using DEM modeling. Granul. Matter 17(5), 603–616 (2015). https://doi.org/10.1007/s10035-015-0579-810.1007/s10035-015-0579-8 ↗
3. Amberger, S., Friedl, M., Goniva, C., Pirker, S., Kloss, C.: Approximation of objects by spheres for multisphere simulations in DEM. In: ECCOMAS 2012—European Congress on Computational Methods in Applied Sciences and Engineering (2012)
4. Andò, E., Hall, S.A., Viggiani, G., Desrues, J., Bésuelle, P.: Experimental micromechanics: grain-scale observation of sand deformation. Geotech. Lett. 2(3), 107–112 (2012). https://hal.archives-ouvertes.fr/hal-0157113510.1680/geolett.12.00027 ↗
5. Blum, H.: A transformation for extracting new descriptors of shape. In: Wathen-Dunn, W. (ed.) Models for the Perception of Speech and Visual Form. MIT Press, Cambridge (1976)
6. Bradshaw, G., O’Sullivan, C.: Adaptive medial-axis approximation for sphere-tree construction. ACM Trans. Graph. 23(1), 1–26 (2004)10.1145/966131.966132 ↗
7. Coeurjolly, D., Hulin, J., Sivignon, I.: Finding a minimum medial axis of a discrete shape is NP-hard. Theor. Comput. Sci. 406(1–2), 72–79 (2008)10.1016/j.tcs.2008.06.013 ↗
8. Cundall, P., Strack, O.: Discrete numerical model for granular assemblies. Geotechnique 29(1), 47–65 (1979)10.1680/geot.1979.29.1.47 ↗
9. da Cruz, F., Emam, S., Prochnow, M., Roux, J.N., Chevoir, Fmc: Rheophysics of dense granular materials: discrete simulation of plane shear flows. Phys. Rev. E 72, 021,309 (2005). https://doi.org/10.1103/PhysRevE.72.02130910.1103/PhysRevE.72.021309 ↗
10. Fardin, N., Stephansson, O., Jing, L.: The scale dependence of rock joint surface roughness. Int. J. Rock Mech. Min. Sci. 38(5), 659–669 (2001)10.1016/S1365-1609(01)00028-4 ↗
11. Ferellec, J.F., McDowell, G.: A method to model realistic particle shape and inertia in DEM. Granul. Matter 12(5), 459–467 (2010)10.1007/s10035-010-0205-8 ↗
12. Fierz, C.: The international classification for seasonal snow on the ground. IHP-VI Technical Documents in hydrology. UNESCO/IHP (2009). https://books.google.fr/books?id=1Su5ZwEACAAJ
13. Flin, F., Brzoska, J.B., Lesaffre, B., Colou, C., Pieritz, R.: Three-dimensional geometric measurements of snow microstructural evolution under isothermal conditions. Ann. Glaciol. 38, 39–44 (2004)10.3189/172756404781814942 ↗
14. Gao, R., Du, X., Zeng, Y., Li, Y., Yan, J.: A new method to simulate irregular particles by discrete element method. J. Rock Mech. Geotech. Eng. 4(3), 276–281 (2012). https://doi.org/10.3724/SP.J.1235.2012.0027610.3724/SP.J.1235.2012.00276 ↗
15. Gaume, J., van Herwijnen, A., Chambon, G., Birkeland, K.W., Schweizer, J.: Modeling of crack propagation in weak snowpack layers using the discrete element method. Cryosphere 9(5), 1915–1932 (2015)10.5194/tc-9-1915-2015 ↗
16. Gaume, J., van Herwijnen, A., Chambon, G., Wever, N., Schweizer, J.: Snow fracture in relation to slab avalanche release: critical state for the onset of crack propagation. The Cryosphere 11(1), 217–228 (2017)10.5194/tc-11-217-2017 ↗
17. Hagenmuller, P., Calonne, N., Chambon, G., Flin, F., Geindreau, C., Naaim, M.: Characterization of the snow microstructural bonding system through the minimum cut density. Cold Reg. Sci. Technol. 108, 72–79 (2014)10.1016/j.coldregions.2014.09.002 ↗
18. Hagenmuller, P., Chambon, G., Flin, F., Morin, S., Naaim, M.: Snow as a granular material: assessment of a new grain segmentation algorithm. Granul. Matter 16(4), 421–432 (2014)10.1007/s10035-014-0503-7 ↗
19. Hagenmuller, P., Chambon, G., Lesaffre, B., Flin, F., Naaim, M.: Energy-based binary segmentation of snow microtomographic images. J. Glaciol. 59(217), 859–873 (2013)10.3189/2013JoG13J035 ↗
20. Hagenmuller, P., Chambon, G., Naaim, M.: Microstructure-based modeling of snow mechanics: a discrete element approach. Cryosphere 9(5), 1969–1982 (2015)10.5194/tc-9-1969-2015 ↗
21. Hagenmuller, P., Matzl, M., Chambon, G., Schneebeli, M.: Sensitivity of snow density and specific surface area measured by microtomography to different image processing algorithms. Cryosphere 10(3), 1039–1054 (2016)10.5194/tc-10-1039-2016 ↗
22. Hart, R., Cundall, P., Lemos, J.: Formulation of a three-dimensional distinct element model—part ii. Mechanical calculations for motion and interaction of a system composed of many polyhedral blocks. Int. J. Rock. Mech. Min. 25(3), 117–125 (1988)10.1016/0148-9062(88)92294-2 ↗
23. Hogue, C.: Shape representation and contact detection for discrete element simulations of arbitrary eometries. Eng. Comput. 15(2–3), 374–390 (1998)10.1108/02644409810208525 ↗
24. Kochmanov, N., Tanaka, H.: Role of microstructure in the mechanical behaviour of clay
25. Kruggel-Emden, H., Rickelt, S., Wirtz, S., Scherer, V.: A study on the validity of the multi-sphere discrete element method. Powder Technol. 188(2), 153–165 (2008). https://doi.org/10.1016/j.powtec.2008.04.03710.1016/j.powtec.2008.04.037 ↗
26. Lee, Y., Fang, C., Tsou, Y.R., Lu, L.S., Yang, C.T.: A packing algorithm for three-dimensional convex particles. Granul. Matter 11(5), 307–315 (2009)10.1007/s10035-009-0133-7 ↗
27. Markou, I.: Effect of grain shape and size on the mechanical behavior of reinforced sand. Procedia Eng. 143(Supplement C), 146–152 (2016). https://doi.org/10.1016/j.proeng.2016.06.019 . Advances in Transportation Geotechnics III10.1016/j.proeng.2016.06.019 ↗
28. Price, M., Murariu, V., Morrison, G.: Sphere clump generation and trajectory comparison for real particles. In: Discrete Elements Methods 2007 Conference
29. Radjai, F., Dubois, F.: Discrete-element modeling of granular materials. Wiley-Iste (2011). https://hal.archives-ouvertes.fr/hal-00691805
30. Schleef, S., Löwe, H., Schneebeli, M.: Hot-pressure sintering of low-density snow analyzed by X-ray microtomography and in situ microcompression. Acta Mater. 71, 185–194 (2014)10.1016/j.actamat.2014.03.004 ↗
31. Schweizer, J., Jamieson, J.: Snow cover properties for skier triggering of avalanches. Cold Reg. Sci. Technol. 33(2–3), 207–221 (2001). https://doi.org/10.1016/S0165-232X(01)00039-810.1016/S0165-232X(01)00039-8 ↗
32. Schweizer, J., Jamieson, J., Schneebeli, M.: Snow avalanche formation. Rev. Geophys. 41(4), 2-1–2-25 (2003)10.1029/2002RG000123 ↗
33. Smilauer, V., Catalano, E., Chareyre, B., Dorofenko, S., Duriez, J., Gladky, A., Kozicki, J., Modenese, C., Scholt‘es, L., Sibille, L., Stransky, J., Thoeni, K.: Yade reference documentation. In: Smilauer, V. (ed.) Yade Documentation, 1st edn. The Yade Project, (2010). http://yade-dem.org/doc/
34. Stolpner, S., Kry, P., Siddiqi, K.: Medial spheres for shape approximation. IEEE Trans. Pattern Anal. Mach. Intell. 34(6), 1234–1240 (2012)10.1109/TPAMI.2011.254 ↗
35. Szarf, K., Combe, G., Villard, P.: Influence of the grains shape on the mechanical behavior of granular materials. AIP Conf. Proc. 1145(1), 357–360 (2009)10.1063/1.3179932 ↗
36. Wensrich, C., Katterfeld, A.: Rolling friction as a technique for modelling particle shape in DEM. Powder Technol. 217, 409–417 (2012)10.1016/j.powtec.2011.10.057 ↗
37. Zhao, Y., Xue, Q., Huang, Fx, Hu, Xt, Li, Js: Experimental study on the microstructure and mechanical behaviors of leachate-polluted compacted clay. Environ. Earth Sci. 75(12), 1006 (2016)10.1007/s12665-016-5816-x ↗