Liquid phase oxidation of p-vanillyl alcohol over synthetic Co-saponite catalyst
Source abstract
Abstract
Effect of cobalt loading on porosity of synthetic Co-saponite catalysts and on the air oxidation of p-vanillyl alcohol was studied by varying Co content in the range of 5% to 30% using in situ precipitation method. The pore size increased from 1.29 to 3.69 nm indicating a transition from micro to meso porosity, with increase in Co loading from 5% to 30%. The distribution ratio of Co 3O 4/CoO phases as estimated from TPR studies, also increased from 0.84 to 1.67 with increase in Co loading from 5% to 13% and remained almost constant (1.7) with further increase in Co loading up to 30%. The highest activity (conversion 55%) and selectivity of 99% to p-vanillin obtained for 13% Co-saponite in p-vanillyl alcohol oxidation was due to the highest distribution ratios of Co 3O 4/CoO phases.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mesoporous Materials and Catalysis · Oxidative Organic Chemistry Reactions · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Hydrothermal synthesis of dioctahedral smectites: the Al–Fe3+ chemical series Part I: Influence of experimental conditions10.1016/j.clay.2009.11.019 ↗
2. Characterization of montmorillonite saturated with various cations10.1023/A:1010179207262 ↗
3. Tailored porous materials10.1021/cm9805929 ↗
4. Cobalt-containing hexagonal mesoporous molecular sieves (Co-HMS): synthesis, characterization and catalytic activity in the oxidation reaction of ethylbenzene10.1016/j.molcata.2006.03.072 ↗
5. Oxygen in catalysis in transition metal oxides10.1080/03602457908065099 ↗
6. Understanding physico-chemical properties of saponite synthetic clays10.1016/j.micromeso.2007.05.038 ↗
7. Clay and non-clay minerals in the pharmaceutical industry Part I. Excipients and medical applications10.1016/j.clay.2009.07.017 ↗
8. An investigation of Cu (II) adsorption by raw and acid-activated bentonite: a combined potentiometric, thermodynamic, XRD, IR, DTA study10.1016/j.jhazmat.2007.06.040 ↗
9. Lattice vibrations of montmorillonite: an FT Raman and X-ray diffraction study10.1016/S0169-1317(96)00017-8 ↗
10. An efficient γ-Fe2O3 catalyst for liquid phase air oxidation of p-hydroxybenzyl alcohol under mild conditions10.1016/j.catcom.2008.10.044 ↗
11. Influence of noble metals (Rh, Pd, Pt) on Co-saponite catalysts for HDS and HC of heavy oil10.1016/j.cej.2006.07.003 ↗
12. Pd–Rh promoted Co/HPS catalysts for heavy oil upgrading10.1016/j.apcata.2004.09.026 ↗
13. Remarkable effect of pore size on the catalytic activity of mesoporous silica for the acetalization of cyclohexanone with methanol10.1021/ja0375129 ↗
14. FT-IR study of the silanol groups in dealuminated HY zeolites: nature of the extraframe debris10.1016/0144-2449(91)80308-M ↗
15. Charge location effect on the hydration properties of synthetic saponite and hectorite saturated by Na+, Ca2+ cations: XRD investigation10.1016/j.clay.2009.07.007 ↗
16. Saponite catalysts with systematically varied Mg/Ni ratio: synthesis, characterization, and catalysis10.1016/S1387-1811(99)00122-5 ↗
17. The effect of synthesis temperature on the FT-Raman and FT-IR spectra of saponites10.1016/S0924-2031(00)00056-4 ↗
18. Highly active nanostructured Co3O4 catalyst with tunable selectivity for liquid phase air oxidation of p-cresol10.1246/cl.2008.310 ↗
19. Characterization of clay intercalated cobalt-salen catalysts for the oxidation of p-cresol10.1016/j.apcata.2009.09.003 ↗
20. Heterogeneous cobalt-saponite catalyst for liquid phase air oxidation of p- cresol10.1021/ie801941e ↗
21. Liquid phase oxidation of p-cresol over cobalt saponite10.1007/s11244-009-9199-z ↗
22. Partial oxidation of methane to synthesis gas using LnCoO3 perovskites as catalyst precursors10.1006/jcat.1997.1580 ↗
23. Effect of pore size on the performance of mesoporous zirconia-supported cobalt Fischer–Tropsch catalysts10.1039/B614266D ↗
24. Formation of H3O+ at the Bronsted site in SAPO-34 catalysts10.1021/j100133a001 ↗
25. Solvothermal preparation of TiO2/saponite nanocomposites and photocatalytic activity10.1016/j.clay.2009.09.007 ↗
26. The promoting effect of noble metal addition on niobia-supported cobalt catalysts10.1016/0920-5861(95)00218-9 ↗
27. Intercalated clay catalysts10.1126/science.220.4595.365 ↗
28. Study of the porous solids obtained by acid treatment of a high surface area saponite10.1023/A:1009657312123 ↗
29. Physicochemical and catalytic characterization of non-hydrothermally synthesized Mg-, Ni and Mg–Ni-saponite-like materials10.1016/j.micromeso.2003.12.006 ↗
30. Selective synthesis of p-hydroxybenzaldehyde by liquid-phase catalytic oxidation of p-cresol10.1021/op0498619 ↗
31. Cobalt-salen intercalated montmorillonite catalyst for air oxidation of p-cresol under mild conditions10.1021/ie0700720 ↗
32. Zeolite nanocrystals inside mesoporous TUD-1: a high-performance catalytic composite10.1002/chem.200400343 ↗
33. Sheldon · 1988 · 243
34. Nano-iron oxide-catalyzed selective oxidations of alcohols and olefins with hydrogen peroxide10.1016/j.molcata.2008.06.008 ↗
35. Synthesis, characterization, and catalytic activity of vanadium-incorporated, grafted, and immobilized mesoporous MCM-41 in the oxidation of aromatics10.1016/j.jcat.2004.08.037 ↗
36. Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity10.1351/pac198557040603 ↗
37. A neutral templating route to mesoporous molecular sieves10.1126/science.267.5199.865 ↗
38. Effect of pore size on the catalytic activities of K-10 clay and H-zeolites for the acetalization of ketones with methanol10.1016/j.apcata.2004.09.017 ↗
39. Microwave radiation and mechanical grinding as new ways for preparation of saponite-like materials10.1016/j.clay.2009.11.018 ↗
40. On the structural changes of a saponite intercalated with various polycations upon thermal treatments10.1016/S0926-860X(01)00603-2 ↗
41. Microwave-assisted synthesis of saponite10.1016/j.clay.2009.11.020 ↗
42. Catalytic activity of synthetic saponite clays: effects of tetrahedral and octahedral composition10.1016/j.jcat.2005.02.004 ↗
43. Synthesis and characterisation of boron and gallium substituted saponite clays below 100°C at one atmosphere10.1016/j.micromeso.2004.08.027 ↗
44. Characterization of alumina, silica, and titania supported cobalt catalysts10.1006/jcat.2002.3739 ↗
45. Wang, F., Yang, G., Zhang, W., Wu, W., Xu, J., 2003. Copper and manganese: two concordant partners in the catalytic oxidation of p-cresol to p- hydroxybenzaldehyde. Chem. Commun. 10, 1172–1173.10.1039/b300610g ↗
46. Zeolites and catalysis10.1016/S0167-2738(00)00632-9 ↗
47. Methylene-functionalized saponite: a new type of organoclay with CH2 groups substituting for bridging oxygen centers in the tetrahedral sheet10.1016/j.clay.2009.11.006 ↗
48. IR evidence for migration of protons in H-montmorillonites and organo-montmorillonites10.1346/CCMN.1973.0210309 ↗
49. Catalysis of hydrotalcite-like compounds in liquid phase oxidation: (II) oxidation of p-cresol to p- hydroxybenzaldehyde10.1016/S0926-860X(97)00372-4 ↗
50. Synthesis of clay minerals10.1016/j.clay.2010.06.019 ↗
51. Emerging trends and challenges in synthetic clay-based materials and layered double hydroxides10.1016/j.clay.2009.12.018 ↗