journal article·2023-10Open access

Analysis of the properties of chemically bound phosphate ceramics (CBPCs) produced from metakaolin with various acid phosphates

Rafael Alves André, Emerson Colonetti, Fabio Elyseu, Alexandre Gonçalves Dal-Bó, Nikelli da Rosa Rabelo, Michael Peterson

Abstract

In this study, chemically bound phosphate ceramics (CBPCs), a type of geopolymer, were synthesized by reacting metakaolin (MK) with acidic solutions of phosphoric acid (PA), potassium dihydrogen phosphate (KDP), calcium dihydrogen phosphate (CDP), and aluminum dihydrogen phosphate (ADP). The obtained CBPCs were characterized using thermal analysis (DTA-TG), X-ray diffraction, dilatometry , and scanning electron microscopy and by their real density, porosity, water absorption, and compressive strength . The analyses revealed that the used acid phosphate type strongly influenced the properties of the resulting CBPCs. The best compressive strength results were found in CBPCs obtained using ADP, with an average value of 34.50 MPa and average porosity of 23.21%. For CBPCs obtained from PA, CDP, and KDP, the average compressive strength values were 14.18, 8.17, and 2.84 MPa, respectively; their average porosities were 18.79%, 36.23%, and 37.90%, respectively. The results demonstrate that CBPCs produced with MK can be cured at room temperature and that CBPCs obtained with ADP have higher compressive strength values than these of the other acids.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Oxide Properties and Applications · Bone Tissue Engineering Materials · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Open-cell phosphate-based geopolymer foams by frothing10.1016/j.matlet.2016.11.103 ↗
2. Influence of the curing temperature on the properties of poly(phospho-ferro-siloxo) networks from laterite10.1007/s42452-019-0975-5 ↗
3. Acid-based geopolymers using waste fired brick and different metakaolins as raw materials10.1016/j.clay.2020.105813 ↗
4. Experimental study on the thermal expansion property and mechanical performance of oil well cement with carbonaceous admixtures10.1039/C7RA03504G ↗
5. Thermal and compressive behaviors of fly ash and metakaolin-based geopolymer
6. Use of waste from mineral processing of a pegmatite with albite and spodumene in the development of frits and ceramic glazes10.1590/0366-691320166236 ↗
7. Chemically-bonded phosphate ceramics obtained from aluminum anodizing waste for use as coatings10.1016/j.ceramint.2014.06.039 ↗
8. The reaction of calcium during the formation of metakaolin phosphate geopolymer binder10.1016/j.cemconres.2022.106840 ↗
9. Effect of phosphoric acid content on the microstructure and compressive strength of phosphoric acid-based metakaolin geopolymers10.1016/j.heliyon.2020.e03853 ↗
10. Characterization of chemosynthetic H3PO4-Al2O3-2SiO2 geopolymers10.1016/j.ceramint.2016.03.224 ↗
11. Chemically bonded phosphate ceramics: cementing the gap between ceramics, cements and polymers
12. Introduction
13. Recycling mine tailings in chemically bonded ceramics – a review10.1016/j.jclepro.2017.10.280 ↗
14. Preparation of phosphoric acid-based porous geopolymers10.1016/j.clay.2010.10.004 ↗
15. Model for measurement of thermal expansion coefficient of concrete by fiber optic sensor10.1016/S0020-7683(02)00248-2 ↗
16. Thermal stability, pore structure and moisture adsorption property of phosphate acid-activated metakaolin geopolymer10.1016/j.matlet.2021.130226 ↗
17. Acid based geopolymerization kinetics: effect of clay particle size10.1016/j.clay.2016.08.007 ↗
18. Acid-based geopolymers: understanding of the structural evolutions during consolidation and after thermal treatments10.1016/j.jnoncrysol.2019.02.025 ↗
19. Dilatometry of geopolymers as a means of selecting desirable fly ash sources10.1016/j.jnoncrysol.2012.06.001 ↗
20. New strong cement materials: chemically bonded ceramics
21. Synthesis, thermal properties and electrical conductivity of phosphoric acid-based geopolymer with metakaolin10.1016/j.clay.2019.105192 ↗
22. Mechanical and microstructural properties of metakaolin-based geopolymer cements from sodium waterglass and phosphoric acid solution as hardeners: a comparative study10.1016/j.clay.2017.02.002 ↗
23. Influence of the molar concentration of phosphoric acid solution on the properties of metakaolin-phosphate-based geopolymer cements10.1016/j.clay.2017.07.036 ↗
24. Influence of alumina on the compressive strengths and microstructural properties of the acid-based geopolymers from calcined indurated laterite and metakaolin10.1016/j.clay.2021.106148 ↗
25. Chemically bonded phosphate ceramics century
26. Novel acid-based geopolymer synthesized from nanosized tubular halloysite: the role of precalcination temperature and phosphoric acid concentration10.1016/j.cemconcomp.2020.103601 ↗