Effect of functionalized organic saponite on performance, crystallization and rheology of poly (lactic acid)
Source abstract
Abstract
Abstract In the work, organic saponite (OSAP) was modified with dioctadecyl dimethyl ammonium chloride and saponite by intercalation reaction. Moreover, functionalized OSAP (FOSAP) was prepared with OSAP, BASF chain extender Joncryl ® ADR 4468 and p-phenylenediamine. The optimum reaction conditions of FOSAP were optimized by orthogonal experiment. X-ray diffraction and Fourier transform infrared spectroscopy (FTIR) results demonstrated that saponite had been successfully modified. Moreover, FOSAP/poly (lactic acid) (PLA) nanocomposites were prepared by melting intercalation with PLA and FOSAP. The mechanical properties, rheological behavior and crystallization properties of FOSAP/PLA nanocomposites were investigated. Mechanical properties showed that the impact strength and elongation at break of FOSAP/PLA nanocomposites reached 13.21 KJ/m2 and 71.47%, respectively, when the amount of FOSAP in PLA was 0.3 wt%. In addition, the Cole-Cole curve showed that FOSAP had strong interfacial compatibility with PLA. Furthermore, the crystallization behaviors of PLA before and after modification during isothermal crystallization at 150 °C were investigated by Rheonaut technology for simultaneous rheology and FTIR, which demonstrated that FOSAP effectively promoted the crystallization of PLA and increased the storage modulus. Avrami equation showed that FOSAP changed the nucleation growing mode and significantly accelerated the crystallization rate of PLA, therefore the comprehensive performance of PLA was improved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Polymer Nanocomposites and Properties · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Biodegradable polymernanocomposites for packaging applications10.1016/B978-0-12-804302-8.00010-8 ↗
2. Kinetics of phase change. I General theory10.1063/1.1750380 ↗
3. Influence of chain extender on thermal properties and melt flow index of stereocomplex PLA10.1016/j.polymertesting.2015.04.017 ↗
4. Influence of nanosilica on the morphology, thermal and mechanical properties of polyurethane elastomer
5. Effect of PLA crystallization on the structure of biomimetic composites of PLA and clay10.1002/app.38698 ↗
6. Polylactide (PLA) filaments a biobased solution for additive manufacturing: correlating rheology and thermomechanical properties with printing quality10.3390/ma11071191 ↗
7. Influence of the chain extension on the crystallization behavior of polylactide10.1002/pen.23595 ↗
8. Two-dimensional correlation spectroscopy: effect of band position, width, and intensity changes on correlation intensities10.1366/0003702001950463 ↗
9. Crystalline morphology of PLA/clay nanocomposite films and its correlation with other properties10.1002/app.32345 ↗
10. Modification of PLA with chain extender10.4028/www.scientific.net/AMM.716-717.44 ↗
11. Preparation of hydrogels based on natural polymers via chemical reaction and cross-linking
12. Supermolecular structure and nucleation ability of polylactide-based composites with silica/lignin hybrid fillers10.1007/s10973-016-5311-3 ↗
13. The infrared spectrum of polyvinyl formate10.1016/0584-8539(71)80040-5 ↗
14. Rheology and crystallization behavior of PLLA/TiO2-g-PDLA composites10.1002/pat.3485 ↗
15. Polylactide/exfoliated graphite nanocomposites with enhanced thermal stability, mechanical modulus, and electrical conductivity10.1002/polb.21956 ↗
16. Multifunctional hybrid materials based on carbon nanotube chemically bonded to reduced graphene oxide10.1021/jp4097265 ↗
17. Poly (l-lactic acid)/layered silicate nanocomposite: fabrication, characterization, and properties10.1021/cm034369+ ↗
18. Unusual mechanical properties of melt-blended poly(lactic acid) (PLA)/clay nanocomposites10.1016/j.eurpolymj.2013.12.012 ↗
19. Thermal properties from membrane of polyamide 6/montmorillonite clay nanocomposites obtained by immersion precipitation method10.1007/s10973-009-0332-9 ↗
20. Excellent rheological performance and impact toughness of cellulose nanofibers/PLA/ionomer composite10.1039/C7RA04302C ↗
21. Structural studies of pillared saponite10.1021/j100142a021 ↗
22. Leached natural saponite as the silicate source in the synthesis of aluminosilicate hexagonal mesoporous materials10.1021/jp015578p ↗
23. Design of super-tough co-continuous PLA/NR/SiO2 TPVs with balanced stiffness-toughness based on reinforced rubber and interfacial compatibilization10.1016/j.compscitech.2018.07.005 ↗
24. Manufacturing and properties of PLA absorbable surgical suture10.1177/0040517507087856 ↗
25. Mechanically driven nanocrystallization of amorphous Fe73.5Cu1Nb3Si13.5B9 alloy induced by high-energy ball milling10.1002/pssa.200420038 ↗
26. The effect of morphology and chemical characteristics of cellulose reinforcements on the crystallinity of polylactic acid10.1002/app.23346 ↗
27. Production of biodegradable plastic from agricultural wastes10.1016/j.arabjc.2015.04.008 ↗
28. Perspective on polylactic acid (PLA) based sustainable materials for durable applications: focus on toughness and heat resistance10.1021/acssuschemeng.6b00321 ↗
29. Plastic waste as a global challenge: are biodegradable plastics the answer to the plastic waste problem?10.1099/mic.0.000749 ↗
30. Two-dimensional infrared (2D IR) spectroscopy: theory and applications10.1366/0003702904087398 ↗
31. Rheooptical fourier transform infrared spectroscopy of the deformation behavior in quenched and slow-cooled isotactic polypropylene films10.1002/polb.10304 ↗
32. (Plasticized) Polylactide/(organo-)clay nanocomposites by in situ intercalative polymerization10.1002/macp.200400324 ↗
33. Exfoliated polylactide/clay nanocomposites by in-situ coordination–insertion polymerization10.1002/marc.200390082 ↗
34. A two dimensional infrared correlation spectroscopic study on the structure changes of PVDF during the melting process10.1016/j.polymer.2004.05.034 ↗
35. Plasticized polylactide/clay nanocomposites. I. The role of filler content and its surface organo-modification on the physico-chemical properties10.1002/polb.20694 ↗
36. Preparation and evaluation of polymer/clay nanocomposite surface treatments for concrete durability enhancement10.1016/j.cemconcomp.2011.11.006 ↗
37. Bio-polyethylene (Bio-PE), bio-polypropylene (Bio-PP) and bio-poly(ethylene terephthalate) (Bio-PET): recent developments in bio-based polymers analogous to petroleum-derived ones for packaging and engineering applications10.3390/polym12081641 ↗
38. Novel elastomer dye-functionalised POSS nanocomposites: enhanced colourimetric, thermomechanical and thermal properties10.3144/expresspolymlett.2012.39 ↗
39. The effect of crystallization of PLA on the thermal and mechanical properties of microfibrillated cellulose-reinforced PLA composites10.1016/j.compscitech.2009.02.022 ↗
40. Silylation of saponite with 3-aminopropyltriethoxysilane10.1016/j.clay.2016.05.026 ↗
41. Rheological and thermal properties of polylactide/organic montmorillonite nanocomposites10.1002/app.36770 ↗
42. Improving interfacial adhesion of PLA/lignin composites by one-step solvent-free modification method10.32604/jrm.2020.09961 ↗
43. Structure and properties of quaternary fulvic acid–intercalated saponite/poly(lactic acid) nanocomposites10.1016/j.clay.2015.02.033 ↗
44. The effect of clay modification on the mechanical properties of poly(methyl methacrylate)/organomodified montmorillonite nanocomposites prepared by in sitususpension polymerization10.1002/pc.23343 ↗
45. Synthesis of electromagnetic functionalized nickel/polypyrrole core/shell composites10.1021/jp804327k ↗
46. Crystallization kinetics and morphology of partially melted poly(lactic acid)10.1016/j.polymertesting.2014.05.012 ↗
47. Preparation and characterization of phosphorylated graphene oxide grafted with poly(l-lactide) and its effect on the crystallization, rheological behavior, and performance of poly (lactic acid)10.1002/pat.4717 ↗
48. Physical and rheological properties of maleic anhydride-incorporated PVDF: does MAH act as a physical crosslinking point for PVDF molecular chains?10.1021/acsomega.9b03256 ↗
49. Memory effect on the crystallization behavior of poly(lactic acid) probed by infrared spectroscopy10.1016/j.eurpolymj.2017.04.016 ↗
50. Structural changes and crystallization dynamics of poly(l-lactide) during the cold-crystallization process investigated by infrared and two-dimensional infrared correlation spectroscopy10.1021/ma049288t ↗
51. Infrared spectroscopic study of CH3···OC interaction during poly(l-lactide)/poly(d-lactide) stereocomplex formation10.1021/ma047872w ↗
52. Variable-temperature fourier-transform infrared studies of poly(l-lactic acid) in different states of order: a 2DCOS and PCMW2D analysis10.1016/j.molstruc.2015.10.090 ↗
53. Surface modification of thermoplastic poly(vinyl alcohol)/saponite nanocomposites via surface-initiated atom transfer radical polymerization enhanced by air dielectric discharges barrier plasma treatment10.1016/j.apsusc.2012.03.145 ↗