Modeling of interphase strength between polymer host and clay nanoparticles in nanocomposites by clay possessions and interfacial/interphase terms
Source abstract
Abstract
Abstract This article develops the equations for interphase strength and Pukanszky's “B” interphase parameter in clay nanocomposites as a function of clay properties and interfacial/interphase parameters. The experimental results of tensile strength for various samples are applied to validate the developed models. Moreover, the developed equations for interphase strength and “B” are examined by parametric analyses. All parameters acceptably influence the interphase strength and “B” confirming the advanced equations. Poor critical interfacial shear strength and strong polymer matrix positively handle the interphase strength, but only high critical interfacial shear strength causes a poor interphase. Additionally, the exceptionally poor interfacial shear strength or very short clay significantly deteriorates the interphase strength. Furthermore, only thick clay mainly weakens the interphase region demonstrating that the thick clay declines the efficiency of interphase area in the nanocomposites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Asphalt Pavement Performance Evaluation · Composite Material Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. Influence of chemical composition of Brazilian organoclays on the morphological, structural and thermal properties of PLA-organoclay nanocomposites10.1016/j.clay.2019.105186 ↗
2. Effect of organoclay on the gas barrier properties of natural rubber nanocomposites10.1002/pc.22188 ↗
3. An overview on clay-mediated compatibilization of polyethylene/polyamide blends with droplet morphology10.1016/j.clay.2019.04.002 ↗
4. Enhanced antimicrobial performance of cloisite 30B/poly (ε-caprolactone) over cloisite 30B/poly (l-lactic acid) as evidenced by structural features10.1016/j.clay.2017.12.003 ↗
5. Processing and characterization of a polylactic acid/nanoclay composite for laser sintering10.1002/pc.23848 ↗
6. Modeling the phase behavior of polymer/clay nanocomposites10.1021/ar970336m ↗
7. Effect of the mode of nanoclay inclusion on morphology development and rheological properties of nylon6/ethyl–vinyl-alcohol blend composites10.1016/j.polymer.2017.08.032 ↗
8. Sepiolite needle-like clay for PA6 nanocomposites: an alternative to layered silicates?10.1016/j.compscitech.2009.07.016 ↗
9. Miscibility–dispersion, interfacial strength and nanoclay mobility relationships in polymer nanocomposites10.1039/b900295b ↗
10. Poly (butylene terephthalate)–clay nanocomposites prepared by melt intercalation: morphology and thermomechanical properties10.1002/pi.1686 ↗
11. Estimation of the tensile modulus of polymer carbon nanotube nanocomposites containing filler networks and interphase regions by development of the Kolarik model10.1039/C8RA01910J ↗
12. Estimation of interfacial properties of nanocomposites using an analytical interphase model10.1016/j.compstruct.2017.09.102 ↗
13. Polymer nanocomposites: the “nano” effect on mechanical properties10.1080/15583720701271278 ↗
14. Synergistic effect of Cloisite 15A and 30B nanofillers on the characteristics of nanocomposite polyethersulfone membrane10.1016/j.clay.2019.03.002 ↗
15. Estimation of interphase thickness and properties in PP/layered silicate nanocomposites10.1016/j.eurpolymj.2011.06.010 ↗
16. Intercalated linear low density polyethylene (LLDPE)/clay nanocomposites prepared with oxidized polyethylene as a new type compatibilizer: structural, mechanical and barrier properties10.1016/j.eurpolymj.2007.06.019 ↗
17. Mechanical percolation in cellulose whisker nanocomposites10.1002/pen.11821 ↗
18. Effect of the interphase on large deformation behaviour of polymer–clay nanocomposites near the glass transition: 2D RVE computational modelling10.1016/j.commatsci.2013.12.012 ↗
19. Effect of sodium montmorillonite source on nylon 6/clay nanocomposites10.1016/j.polymer.2004.01.061 ↗
20. Clay/polymer composites: the story10.1016/S1369-7021(04)00509-7 ↗
21. Preparation of polystyrene–clay nanocomposites via dispersion polymerization using oligomeric styrene-montmorillonite as stabilizer10.1002/pi.4151 ↗
22. Modelling stiffness of polymer/clay nanocomposites10.1016/j.polymer.2006.11.062 ↗
23. Effects of organoclay on the compatibility and interfacial phenomena of PE/EVA blends with UCST phase behavior10.1002/pc.22898 ↗
24. Comparison of the properties of clay polymer nanocomposites prepared by montmorillonite modified by silane and by quaternary ammonium salts10.1016/j.clay.2013.09.004 ↗
25. Real-time investigation of crystallization in nylon 6-clay nano-composite probed by infrared spectroscopy10.1016/j.polymer.2010.09.033 ↗
26. Mechanical properties and structure of solvent processed novolac resin/layered silicate: development of interphase region10.1039/C5RA12458A ↗
27. Stress transfer properties of carbon nanotube reinforced polymer composites at low temperature environment10.1016/j.compositesb.2016.09.006 ↗
28. Effect of Organoclay Platelets on Morphology of Nylon-6 and Poly (ethylene-r an-propylene) Rubber Blends10.1021/ma0352072 ↗
29. Three-dimensional models for predicting the modulus and yield strength of polymer blends, foams, and particulate composites10.1002/pc.10295 ↗
30. The mixed impact of nanoclays on the apparent diffusion coefficient of additives in biodegradable polymers in contact with food10.1016/j.clay.2019.105170 ↗
31. Dependence of the Pukánszky’s interaction parameter B on the interface shear strength (IFSS) of nanofiller-and short fiber-reinforced polymer composites10.1016/j.compscitech.2014.01.002 ↗
32. The effects of the interphase and strain gradients on the elasticity of layer by layer (LBL) polymer/clay nanocomposites10.1016/j.ijsolstr.2010.12.008 ↗
33. PP/clay nanocomposites prepared by grafting-melt intercalation10.1016/S0032-3861(01)00561-4 ↗
34. Largely enhanced energy density of polypropylene based nanocomposites via synergistic hybrid fillers and high shear extrusion assisted dispersion10.1016/j.compositesa.2019.01.022 ↗
35. Comparison of filler percolation and mechanical properties in graphene and carbon nanotubes filled epoxy nanocomposites10.1016/j.eurpolymj.2013.02.033 ↗
36. Effect of organoclay on the solvent diffusion behavior and mechanical properties of natural rubber nanocomposites10.1002/pc.24317 ↗
37. Effect of clay exfoliation and organic modification on morphological, dynamic mechanical, and thermal behavior of melt-compounded polyamide-6 nanocomposites10.1002/pc.20284 ↗
38. Investigation of the interphase effects on the mechanical behavior of carbon nanotube polymer composites by multiscale modeling10.1002/app.31460 ↗
39. Interphase effect on the elastic and thermal conductivity response of polymer nanocomposite materials: 3D finite element study10.1016/j.commatsci.2012.11.035 ↗
40. The effect of different clays on the structure, morphology and degradation behavior of poly (lactic acid)10.1016/j.clay.2013.11.029 ↗
41. Monoglyceride as an effective and friendly modification agent for nano-layered structure of Montmorillonite10.1016/j.clay.2019.04.008 ↗
42. Rheology and processing of polymer/layered silicate nanocomposites10.1002/9781118969809.ch5 ↗
43. Influence of interphase and filler distribution on the elastic properties of nanoparticle filled polymers10.1016/j.mechrescom.2013.07.005 ↗
44. Influence of interface interaction on the ultimate tensile properties of polymer composites10.1016/0010-4361(90)90240-W ↗
45. The roles of interphase and filler dimensions in the properties of tunneling spaces between CNT in polymer nanocomposites10.1002/pc.24739 ↗
46. Synthesis and characterization of clay dispersed polystyrene nanocomposite via atom transfer radical polymerization10.1002/pc.20975 ↗
47. Theoretical modelling analysis on tensile properties of bioepoxy/clay nanocomposites using epoxidised soybean oils10.1155/2019/4074869 ↗
48. Influence of nanoclay localization on structure–property relationships of polylactide-based biodegradable blend nanocomposites10.1002/mame.201800134 ↗
49. Effect of clay modifier on morphology, thermal properties and flammability of newly synthesized poly (sulfide–sulfone–amide)10.1016/j.clay.2015.02.020 ↗
50. Influence of the silane grafting of polyethylene on the morphology, barrier, thermal, and rheological properties of high-density polyethylene/organoclay nanocomposites10.1002/app.36367 ↗
51. Effect of interphase percolation on mechanical behavior of nanoparticle-reinforced polymer nanocomposite with filler agglomeration: a multiscale approach10.1016/j.cplett.2015.06.054 ↗
52. Altered phase model for polymer clay nanocomposites10.1021/la800583h ↗
53. Organoclay-epoxy nanocomposites modified with polyacrylates: the effect of the clay mineral dispersion method10.1016/j.clay.2016.02.003 ↗
54. Addition of nanoclay and compatibilized EPDM rubber for improved impact strength of epoxy glass fiber composites10.1016/j.compositesa.2017.10.009 ↗
55. Chemically specific multiscale modeling of clay–polymer nanocomposites reveals intercalation dynamics, tactoid self-assembly and emergent materials properties10.1002/adma.201403361 ↗
56. Mechanical properties of polypropylene/clay nanocomposites: effect of clay content, polymer/clay compatibility, and processing conditions10.1002/app.29066 ↗
57. Prediction of yield strength of MWCNT/PP nanocomposite considering the interphase and agglomeration10.1016/j.compstruct.2017.02.042 ↗
58. Increasing the incorporation of recycled PET on polymeric blends through the reinforcement with commercial nanoclays10.1016/j.clay.2019.105185 ↗
59. Structure and properties of poly (ethylene terephthalate)/Na+−montmorillonite nanocomposites prepared by solid state shear milling (S3M) method10.1002/polb.21417 ↗
60. Influence of clay content and amount of organic modifiers on morphology and pervaporation performance of EVA/clay nanocomposites10.1021/ie102259s ↗
61. The role of plasticizer on the exfoliation and dispersion and fracture behavior of clay particles in PVC matrix: a comprehensive morphological study10.1016/j.polymer.2004.06.061 ↗
62. Effective stress transferring interface and mechanical property enhancement of poly (L-lactide)/multi-walled carbon nanotubes fibers10.1016/j.matchemphys.2019.06.006 ↗
63. Effects of interphase on tensile strength of polymer/CNT nanocomposites by Kelly–Tyson theory10.1016/j.mechmat.2015.02.002 ↗
64. A model for tensile strength of polymer/clay nanocomposites assuming complete and incomplete interfacial adhesion between the polymer matrix and nanoparticles by the average normal stress in clay platelets10.1039/C6RA04132A ↗
65. Expansion of Kolarik model for tensile strength of polymer particulate nanocomposites as a function of matrix, nanoparticles and interphase properties10.1016/j.jcis.2017.07.051 ↗
66. A two-step technique for tensile strength of montmorillonite/polymer nanocomposites assuming filler morphology and interphase properties10.1016/j.clay.2017.08.026 ↗
67. A multistep methodology for calculation of the tensile modulus in polymer/carbon nanotube nanocomposites above the percolation threshold based on the modified rule of mixtures10.1039/C8RA04992K ↗
68. Evaluation of the tensile strength in carbon nanotube-reinforced nanocomposites using the expanded takayanagi model10.1007/s11837-019-03536-2 ↗
69. A simulation work for the influences of aggregation/agglomeration of clay layers on the tensile properties of nanocomposites10.1007/s11837-019-03768-2 ↗
70. A developed equation for electrical conductivity of polymer carbon nanotubes (CNT) nanocomposites based on Halpin-Tsai model10.1016/j.rinp.2019.102406 ↗
71. Modeling the roles of carbon nanotubes and interphase dimensions in the conductivity of nanocomposites10.1016/j.rinp.2019.102562 ↗
72. A modeling methodology to investigate the effect of interfacial adhesion on the yield strength of MMT reinforced nanocomposites10.1016/j.jiec.2018.09.039 ↗
73. Tensile modulus prediction of carbon nanotubes-reinforced nanocomposites by a combined model for dispersion and networking of nanoparticles10.1016/j.jmrt.2019.10.025 ↗
74. Prediction of storage modulus in solid-like poly (lactic acid)/poly (ethylene oxide)/carbon nanotubes nanocomposites assuming the contributions of nanoparticles and interphase regions in the networks10.1016/j.jmbbm.2018.06.044 ↗
75. Exfoliation of montmorillonite and related properties of clay/polymer nanocomposites10.1016/j.clay.2018.12.006 ↗