Filler-matrix interaction in sodium montmorillonite-organosilica nanocomposite coatings for corrosion protection
Source abstract
Abstract
Abstract Sodium montmorillonite/organosilica sol-gel coatings were obtained from a hydrolysed solution of 3-glycidoxypropyltrimethoxysilane (GPTMS), methyltriethoxysilane (MTES) and tetraethoxysilane (TEOS) with 2 wt% of sonicated sodium montmorillonite (Mt). The effect of different sonication times (0, 1, 3, 12 h) on the structure of both Mt and sol-gel clay-organosilica nanocomposites was investigated by means of 29Si and 27Al solid state nuclear magnetic resonance (NMR) and X-ray diffraction (XRD). Mt underwent relevant structural changes with the sonication treatment and the effect appeared time-dependent, although not linear. The structural changes induced on clay by the sonication process were kept in the clay-organosilica nanocomposite, according to 29Si NMR. Mt addition to the hybrid sol-gel network led to decreasing the amount of completely condensed silicon units by formation of new Si-O-Al hetero-metallic bonds, as shown by 27Al NMR results. Moreover, organosilica matrix and Mt appeared to interact even in the absence of the sonication treatment of the filler. The NMR study of GPTMS/MTES/Mt and TEOS/Mt samples clearly proves the interaction of Mt with the silsesquioxane (T) species in the obtained composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Silicone and Siloxane Chemistry · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Structural study of synthetic mica-montmorillonite by means of 2D MAS NMR experiments10.1007/s00269-005-0457-8 ↗
2. Effect of the bentonite filler on structure and properties of composites based on hydroxyethyl cellulose
3. Organomodified montmorillonite as filler in natural and synthetic rubber10.1002/app.20401 ↗
4. Adsorptive properties of sol-gel derived hybrid organic/inorganic coatings10.1016/j.matchemphys.2014.06.042 ↗
5. Investigation of nanodispersion in polystyrene–montmorillonite nanocomposites by solid-state NMR
6. Modeling the acid–base surface chemistry of montmorillonite10.1016/j.jcis.2007.03.062 ↗
7. Structure and mineralogy of clay minerals10.1016/B978-0-08-098258-8.00002-X ↗
8. New insights into the molecular structures, compositions, and cation distributions in synthetic and natural montmorillonite clays10.1021/cm302549k ↗
9. Identification and quantification of defects in the cation ordering in Mg/Al layered double hydroxides10.1021/cm200029q ↗
10. Barrier properties and structural study of nanocomposite of HDPE/montmorillonite modified with polyvinylalcohol10.1155/2013/679567 ↗
11. Analysis of Fe segregation in the octahedral sheet of bentonitic illite-smectite by means of FTIR, 27Al MAS NMR and reverse Monte Carlo simulations10.2475/ajs.299.4.289 ↗
12. Electrochemical investigation of high-performance silane sol-gel films containing clay nanoparticles10.1016/j.porgcoat.2010.04.007 ↗
13. Preparation of polymer/clay mineral nanocomposites via dispersion of silylated montmorillonite in a UV curable epoxy matrix10.1016/j.clay.2007.12.011 ↗
14. Effect of functional groups on condensation and properties of sol–gel silica nanoparticles prepared by direct synthesis from organoalkoxysilanes10.1016/j.matchemphys.2010.12.015 ↗
15. Solid state NMR characterisation of the thermal transformation Fuller‘s Earth10.1016/S0926-2040(97)00069-6 ↗
16. Solid-state 27A1 and 29Si NMR analysis of hydroxy-Cr and-A1 interlayered montmorillonite10.1180/claymin.1997.032.3.10 ↗
17. Solid-state NMR and FTIR studies of lime stabilized montmorillonitic and lateritic clays10.1016/j.clay.2012.05.006 ↗
18. The use of montmorillonite as a reinforcing and compatibilizing filler for NBR/SBR rubber blend10.1016/j.polymertesting.2004.03.003 ↗
19. Effect of Na montmorillonite sonication on the protective properties of hybrid -silica coatings10.1016/j.electacta.2013.11.006 ↗
20. Influence of formulation and application parameters on the performances of a sol–gel/clay nanocomposite on the corrosion resistance of hot-dip galvanized steel. Part II. Effect of curing temperature and time10.1016/j.surfcoat.2014.07.020 ↗
21. Organic–inorganic hybrid sol–gel coatings for metal corrosion protection: a review of recent progress10.1007/s11998-014-9595-6 ↗
22. Structure and mechanical properties of superabsorbent poy(acrylamide)-montmorillonite composite hydrogels10.1016/0966-7822(93)90002-Y ↗
23. Solid-state NMR investigation on the interactions between a synthetic montmorillonite and two homopolypeptides10.1016/j.ssnmr.2005.10.016 ↗
24. NMR study of surfactant molecules intercalated in montmorillonite and in silylated montmorillonite10.1180/0009855033830103 ↗
25. Corrosion protection of carbon steel by an epoxy resin containing organically modified clay10.1016/j.surfcoat.2007.02.009 ↗
26. Distinguishing opaline silica from cristobalite in bentonites: a practical procedure and perspective based on NaOH dissolution10.1180/claymin.2008.043.3.11 ↗
27. Modification and characterization of montmorillonite fillers used in composites with vulcanized natural rubber10.2478/s11696-008-0079-y ↗
28. Characterization and corrosion protection properties of epoxy powder coatings containing nanoclays10.1016/j.porgcoat.2013.01.005 ↗
29. Iler · 1979
30. Montmorillonite-cristobalite association in bentonite clays from Bulgarian deposits
31. Exfoliation properties of acid-activated montmorillonites and their resulting organoclays10.1021/la802533y ↗
32. Solid-state 29 Si MAS NMR studies of illite and illite-smectite from shale10.2138/am-1999-0922 ↗
33. In situ growth of layered double hydroxide on disordered platelets of montmorillonite10.1016/j.clay.2015.06.032 ↗
34. Preparation of ultraviolet-cured nanocomposite coatings for protecting against corrosion of metal substrates10.1016/j.corsci.2009.04.026 ↗
35. Study of the factors influencing the exfoliation of an organically modified montmorillonite in methyl methacrylate/poly(methyl methacrylate) mixtures10.1002/app.22582 ↗
36. Characterization of surface-modified montmorillonite nanocomposites10.1016/j.ceramint.2011.08.012 ↗
37. Improvement of corrosion protection offered to galvanized steel by incorporation of lanthanide modified nanoclays in silane layer10.1016/j.porgcoat.2011.12.001 ↗
38. Liquid exfoliation of layered materials10.1126/science.1226419 ↗
39. Physicochemical characterization of a Texas montmorillonite pillared with polyoxocations of aluminum. II. NMR and microcalorimetry results10.1016/S1387-1811(00)00175-X ↗
40. Study of the effect of nanoclay incorporation on the rheological properties and corrosion protection by a silane layer10.1016/j.porgcoat.2010.11.022 ↗
41. XRD investigations of hydrated homoionic montmorillonite saturated by several heavy metal cations10.1016/j.desal.2010.12.018 ↗
42. Textural effects in powdered montmorillonite induced by freeze-drying and ultrasound pretreatment10.1016/j.clay.2005.10.002 ↗
43. Effects of addition of corrosion inhibitors to silane films on the performance of AA2024-T3 in a 0.5M NaCl solution10.1016/j.porgcoat.2003.07.008 ↗
44. Nanoparticle-filled silane films as chromate replacements for aluminum alloys10.1016/j.porgcoat.2003.08.015 ↗
45. Sodium montmorillonite silylation: unexpected effect of the aminosilane chain length10.1016/j.jcis.2010.07.059 ↗
46. Influence of formulation and application parameters on the performances of a sol–gel/clay nanocomposite on the corrosion resistance of hot-dip galvanized steel. Part I. Study of the sol preparation parameters10.1016/j.surfcoat.2014.06.021 ↗
47. Aluminum ions in aqueous solutions10.2475/ajs.267.1.99 ↗
48. Role of promoters in improving adhesions of organic coatings to a substrate10.1016/0300-9440(95)00572-2 ↗
49. Influence of dispersing medium on grafting of aminopropyltriethoxysilane in swelling clay materials10.1016/j.jcis.2005.12.049 ↗
50. Nanostructure and dynamic mechanical properties of silane-functionalized montmorillonite/epoxy nanocomposites10.1016/j.clay.2011.08.002 ↗
51. Characterization of montmorillonite surfaces after modification by organosilane10.1346/CCMN.2001.0490202 ↗
52. Release of silicon and aluminum from montmorillonite surfaces in aqueous systems
53. Structural evaluation and thermal properties of poly(lactic acid) and different synthetic micas nanocomposites10.1002/pc.22177 ↗
54. High resolution solid-state NMR studies on dissolution and alteration of Na-montmorillonite under highly alkaline conditions10.1016/j.micromeso.2007.03.008 ↗
55. Acid-treated montmorillonites – a study by 29Si and 27Al MAS NMR10.1180/claymin.1994.029.1.02 ↗
56. The use of nanoclay in preparation of epoxy anticorrosive coatings10.1016/j.porgcoat.2013.11.017 ↗
57. The titration of clay minerals. I. Discontinuous backtitration technique combined with CEC measurements10.1016/j.jcis.2003.11.021 ↗
58. Incorporation of an indole-3 butyric acid modified clay in epoxy resin for corrosion protection of carbon steel10.1016/j.surfcoat.2008.04.092 ↗
59. Corrosion protection properties of organofunctional silanes – an overview10.1016/S1007-0214(05)70134-6 ↗
60. The nature of disorder in montmorillonite by simulation of X-ray powder patterns10.2138/am-2002-0720 ↗
61. Sol-gel coatings on metals for corrosion protection10.1016/j.porgcoat.2008.08.010 ↗
62. A room temperature cured sol-gel anticorrosion pre-treatment for Al 2024-T3 alloys10.1016/j.corsci.2007.04.015 ↗
63. High-resolution 29Si NMR spectroscopy of 2:1 layer silicates: correlations among chemical shift, structural distortions, and chemical variations
64. Arrangement, conformation, and mobility of surfactant molecules intercalated in montmorillonite prepared at different pillaring reagent concentrations as studied by solid-state NMR spectroscopy10.1016/j.jcis.2006.02.046 ↗