Simulation of tensile strength for halloysite nanotubes/polymer composites
Source abstract
Abstract
Abstract There are limited equations for determining the mechanical performance of halloysite nanotubes (Hal)/polymer samples, and these equations ignore the reinforcing efficacy of the interphase zone. In this article, the Kolarik system is used to determine the tensile strength of Hal-reinforced nanocomposites by Hal size, Hal concentration, and interphase properties. In addition, Pukanszky model is modified for this material type to account for effective Hal concentration based on the advanced Kolarik model. Numerous sets of experimental data for several samples and parametric inspections endorse the developed models. Both interphase depth and power directly govern the nanocomposite's strength and the interphase factor “A” in the advanced Kolarik model. The lowest ranges of interphase properties lead to the lowest level of “A,” and at this level, there is no strengthening of the nanocomposites. The Hal radius (R) of 10 nm and Hal length (l) of 3 μm lead to the highest “A” of 50 and the maximum relative strength of 4.5 (350% improvement in nanocomposite's strength), whereas Hal with R > 50 nm and l
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Clay minerals and soil interactions · Iron oxide chemistry and applications · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Microstructural design for enhanced mechanical and shape memory performance of polyurethane nanocomposites: role of hybrid nanofillers of montmorillonite and halloysite nanotube10.1016/j.clay.2020.105816 ↗
2. Modeling the interphase region in carbon nanotube-reinforced polymer nanocomposites10.1002/pc.24950 ↗
3. Preparation and characterization of ethylene-vinyl acetate/halloysite nanotube nanocomposites10.1007/s10853-015-8891-6 ↗
4. Development of PCL/PEO electrospun fibrous membranes blended with silane-modified halloysite nanotube as a curcumin release system10.1016/j.clay.2019.105430 ↗
5. Investigation of nanomechanical and morphological properties of silane-modified halloysite clay nanotubes reinforced polycaprolactone bio-composite nanofibers by atomic force microscopy
6. Estimation of the tensile modulus of polymer carbon nanotube nanocomposites containing filler networks and interphase regions by development of the Kolarik model10.1039/C8RA01910J ↗
7. Halloysite nanotubes in polymer science: Purification, characterization, modification and applications10.1515/ntrev-2020-0024 ↗
8. 3-D computational model of poly (lactic acid)/halloysite nanocomposites: predicting elastic properties and stress analysis10.1016/j.polymer.2014.09.057 ↗
9. Estimation of interphase thickness and properties in PP/layered silicate nanocomposites10.1016/j.eurpolymj.2011.06.010 ↗
10. Carboxylated butadiene–styrene rubber/halloysite nanotube nanocomposites: interfacial interaction and performance10.1016/j.polymer.2008.08.042 ↗
11. Newly emerging applications of halloysite nanotubes: a review10.1002/pi.2754 ↗
12. Fabrication of polylactic acid/halloysite nanotube scaffolds by foam injection molding for tissue engineering10.1002/pc.25406 ↗
13. Effect of phosphoric acid on the morphology and tensile properties of halloysite-polyurethane composites10.1016/j.rinp.2018.02.008 ↗
14. Preparation and properties of halloysite nanotubes/poly (ethylene methyl acrylate)-based nanocomposites by variation of mixing methods10.1080/03602559.2017.1370106 ↗
15. Electrospun chitosan/polyethylene-oxide (PEO)/halloysites (HAL) membranes for bone regeneration applications10.1016/j.clay.2020.105601 ↗
16. Designing a pH-responsive drug delivery system for the release of black-carrot anthocyanins loaded in halloysite nanotubes for cancer treatment10.1016/j.clay.2020.105770 ↗
17. Creep performance of CNT polymer nanocomposites-an emphasis on viscoelastic interphase and CNT agglomeration10.1016/j.compositesb.2018.12.093 ↗
18. The synergistic reinforcing effects of halloysite nanotube particles and polyolefin elastomer-grafted-maleic anhydride compatibilizer on melt and solid viscoelastic properties of polylactic acid/polyolefin elastomer blends10.1016/j.polymertesting.2020.106757 ↗
19. Three-dimensional models for predicting the modulus and yield strength of polymer blends, foams, and particulate composites10.1002/pc.10295 ↗
20. Development of silane grafted halloysite nanotube reinforced polylactide nanocomposites for the enhancement of mechanical, thermal and dynamic-mechanical properties10.1016/j.clay.2016.10.046 ↗
21. Mechanical, thermal and dynamic-mechanical studies of functionalized halloysite nanotubes reinforced polypropylene composites
22. Surface-treated short sisal fibers and halloysite nanotubes for synergistically enhanced performance of polypropylene hybrid composites
23. Enhanced physical, mechanical, and cytocompatibility behavior of polyelectrolyte complex hydrogels by reinforcing halloysite nanotubes and graphene oxide10.1016/j.compscitech.2019.03.008 ↗
24. Dependence of the Pukánszky’s interaction parameter B on the interface shear strength (IFSS) of nanofiller-and short fiber-reinforced polymer composites10.1016/j.compscitech.2014.01.002 ↗
25. Properties of halloysite nanotube–epoxy resin hybrids and the interfacial reactions in the systems10.1088/0957-4484/18/45/455703 ↗
26. Effect of interphase, curvature and agglomeration of SWCNTs on mechanical properties of polymer-based nanocomposites: Experimental and numerical investigations10.1016/j.compositesb.2019.107119 ↗
27. Processing and characterization of halloysite nanotubes filled polypropylene nanocomposites based on a masterbatch route: effect of halloysites treatment on structural and mechanical properties
28. Highly dispersed polyamide-11/halloysite nanocomposites: thermal, rheological, optical, dielectric, and mechanical properties10.1002/app.39160 ↗
29. Poly (lactic acid)/halloysite nanotubes nanocomposites: Structure, thermal, and mechanical properties as a function of halloysite treatment10.1002/app.38358 ↗
30. Influence of interface interaction on the ultimate tensile properties of polymer composites10.1016/0010-4361(90)90240-W ↗
31. A model for tensile strength of polymer/carbon nanotubes nanocomposites assuming the percolation of interphase regions10.1016/j.colsurfa.2017.10.063 ↗
32. An attempt to quantitatively predict the interfacial adhesion of differently surface treated nanosilicas in a polyurethane coating matrix using tensile strength and DMTA analysis10.1016/j.ijadhadh.2011.12.005 ↗
33. Computational study of water adsorption on halloysite nanotube in different pH environments10.1016/j.clay.2020.105589 ↗
34. Plasma-modified halloysite nanocomposites: effect of plasma modification on the structure and dynamic mechanical properties of halloysite–polystyrene nanocomposites10.1002/pi.2946 ↗
35. Development of regenerated cellulose/halloysite nanotube bionanocomposite films with ionic liquid10.1016/j.ijbiomac.2013.03.066 ↗
36. Prediction of yield strength of MWCNT/PP nanocomposite considering the interphase and agglomeration10.1016/j.compstruct.2017.02.042 ↗
37. Polylactide/halloysite nanotube nanocomposites: thermal, mechanical properties, and foam processing10.1002/app.39179 ↗
38. Polyethylene glycol infused acid-etched halloysite nanotubes for melt-spun polyamide-based composite phase change fibers10.1016/j.clay.2019.105249 ↗
39. Effects of interphase on tensile strength of polymer/CNT nanocomposites by Kelly–Tyson theory10.1016/j.mechmat.2015.02.002 ↗
40. Thickness, modulus and strength of interphase in clay/polymer nanocomposites10.1016/j.clay.2014.12.016 ↗
41. Expansion of Kolarik model for tensile strength of polymer particulate nanocomposites as a function of matrix, nanoparticles and interphase properties10.1016/j.jcis.2017.07.051 ↗
42. Analysis of critical interfacial shear strength between polymer matrix and carbon nanotubes and its impact on the tensile strength of nanocomposites10.1016/j.jmrt.2020.02.039 ↗
43. A simple and sensible equation for interphase potency in carbon nanotubes (CNT) reinforced nanocomposites10.1016/j.jmrt.2020.04.034 ↗
44. Modeling the roles of carbon nanotubes and interphase dimensions in the conductivity of nanocomposites10.1016/j.rinp.2019.102562 ↗
45. Halloysite nanotubes as nanocarriers for plant herbicide and its controlled release in biodegradable polymers composite film10.1016/j.clay.2019.01.021 ↗
46. Stochastic analysis of interphase effects on elastic modulus and yield strength of nylon 6/clay nanocomposites10.1007/s10999-017-9399-9 ↗