Mechanical and rheological properties of nitrile rubber/fluoromica composites
Source abstract
Abstract
Abstract Fluoromica is a clay mineral obtained from chemical modification of talc with Na2SiF6. In this study, it was used to prepare clay mineral polymer composites (CPN) based on nitrile rubber. The composites were compounded in a roll mill and it was studied the effect of the fluoromica content as well as the shear ratio employed during the preparation. The composites were assessed based on the mechanical properties, dynamic-mechanical performances, rheological properties, and morphological aspects. The results suggested that the formation of chemical crosslinks was affected with the presence of the clay mineral, moreover, little or no reinforcement effect was achieved most likely to the lack of interaction with the matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Dielectric materials and actuators · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Structural characterization of pristine and modified fluoromica using multinuclear solid-state NMR10.1021/jp2020676 ↗
2. Detection of crosslink density by different methods for natural rubber blended with SBR and NBR10.21608/ejs.2007.149034 ↗
3. The effect of filler–filler and filler–elastomer interaction on rubber reinforcement10.1016/j.compositesa.2004.10.004 ↗
4. Delamination of organically modified montmorillonite for reducing the filler networking with carbon black in poly(1,4-cis-isoprene) based nanocomposites10.1016/j.clay.2014.11.017 ↗
5. Reduction of filler networking in silica based elastomeric nanocomposites with exfoliated organo-montmorillonite10.1016/j.clay.2016.09.017 ↗
6. Lamellar nanostructure in ‘Somasif’-based organoclays10.1346/CCMN.2007.0550203 ↗
7. The fabrication and properties of natural rubber-clay nanocomposites10.1016/j.polymertesting.2016.03.010 ↗
8. Morphological and mechanical properties of styrene butadiene rubber/nano copper nanocomposite10.1016/j.rinp.2016.11.022 ↗
9. Rheological properties and curing features of natural rubber compositions filled with fluoromica ME 10010.1590/0104-1428.2352 ↗
10. Composites based on carbon black reinforced NBR/EPDM rubber blends10.1016/j.compositesb.2012.05.020 ↗
11. A mathematical method for XRD pattern interpretation in clay containing nanocomposites10.1016/j.apsusc.2014.01.044 ↗
12. Method for estimating the chemical crosslink densities of cured natural rubber and styrene-butadiene rubber10.5254/1.3538716 ↗
13. Intercalation and exfoliation: a review on morphology of polymer nanocomposites reinforced by inorganic layer structures10.1080/AMP-200068646 ↗
14. Stress relaxation behavior of organically modified montmorillonite filled natural rubber/nitrile rubber nanocomposites10.1016/j.clay.2013.10.019 ↗
15. A novel method for monitoring chemical degradation of crosslinked rubber by stress relaxation under tension10.1016/j.polymdegradstab.2006.03.002 ↗
16. Elastomer composites based on improved fumed silica and carbon black. Advantages of mixed reinforcing systems
17. Characteristic properties of nanoclays and characterization of nanoparticulates and nanocomposites
18. The effect of acrylonitrile content on the thermo- oxidative aging of nitrile rubber10.5254/rct.13.87937 ↗
19. Influence of phenolic curative on crosslink density and other related properties of dynamically cured NR/HDPE blends10.1002/app.30036 ↗
20. Processing of nanostructured polymers and advanced polymeric based nanocomposites10.1016/j.mser.2014.08.002 ↗
21. Carboxylated acrylonitrile butadiene rubber latex/kaolinnanocomposites: preparation and properties10.1080/15685543.2014.899198 ↗
22. Stress relaxation of nitrile rubber composites filled with a hybridmetakaolin/carbon black filler under tensile and compressive forces10.1016/j.clay.2017.10.008 ↗
23. Preparation and properties of radiation crosslinked natural rubber/clay nanocomposites10.1016/j.polymertesting.2004.08.008 ↗
24. The fabrication and properties of natural rubber-clay nanocomposites10.1016/j.polymertesting.2016.03.010 ↗
25. Structure, morphology and thermal stability of synthetic fluorine mica and its organic derivatives10.1016/j.clay.2011.09.006 ↗
26. Effects of epoxidized natural rubber as a compatibilizer in melt compounded natural rubber–organoclay nanocomposites10.1016/j.eurpolymj.2004.06.025 ↗
27. Synthetic, layered nanoparticles for polymeric nanocomposites (PNCs)10.1002/pat.852 ↗
28. Reinforcement of acrylonitrile butadiene rubber using pristine few layer graphene and its hybrid fillers10.1016/j.carbon.2013.04.104 ↗
29. Natural rubber-based nanocomposites by latex compounding with layered silicates10.1016/S0032-3861(03)00480-4 ↗
30. Synthesis and characterization of inorganic–organic hybrid materials based on the intercalation of stable organic radicals into a fluoromica clay10.1039/c3dt50627d ↗
31. Changes of chemical structure and mechanical property levels during thermo-oxidative aging of NBR10.5254/RCT.13.87969 ↗
32. Reduction of aspect ratio of fluoromica using high-energy milling10.1016/j.clay.2015.06.020 ↗