Organic functionalization of clay aerogel and its composites through in-situ crosslinking
Source abstract
Abstract
Clay aerogel composites have great potential for a wide range of applications; however, their high moisture absorbance and inferior mechanical properties have to be addressed. This paper presents crosslinking techniques to develop clay/PVA aerogel composites through an environmentally freeze-drying process using water as a solvent. Water soluble isocyanate and organosilane compounds, namely aliphatic polyisocyanate (Wcro1™) and 3-glycidoxypropyltrimethoxysilane (Wcro2™) were employed and their crosslinking mechanisms were studied. The results of the aerogels characterizations showed that the chosen crosslinkers were able to generate substantial crosslinking reactions. The crosslinked clay/PVA aerogel gave rise to significant improvements in their mechanical and physical properties. The moisture absorbance of the composites was reduced by 27%, while retaining dimensional stability. The developed functionalized clay/PVA aerogels also increased the liquid absorption capacity by 3 times, the compressive modulus increased by 6 folds from 0.48 to 3.6 MPa and the thermal conductivity reduced from the 0.043 to 0.039 W/mK.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aerogels and thermal insulation · Surface Modification and Superhydrophobicity · Advanced Cellulose Research Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Performance characteristics and practical applications of common building thermal insulation materials10.1016/j.buildenv.2004.05.013 ↗
2. Laponite/multigraphene hybrid-reinforced poly(vinyl alcohol) aerogels10.1016/j.polymer.2016.03.077 ↗
3. Design of novel hybrid organic–inorganic nanostructured biomaterials for immunoassay applications10.1088/1748-6041/1/4/008 ↗
4. Small-angle X-ray scattering and FTIR characterization of nanostructured poly (vinyl alcohol)/silicate hybrids for immunoassay applications10.1007/s10853-007-1953-7 ↗
5. Organic–inorganic hybrid gels for the selective absorption of oils from water10.1007/s11356-016-6342-9 ↗
6. FT-IR, FT-Raman, DFT structure, vibrational frequency analysis and Mulliken charges of 2-chlorophenylisothiocyanate
7. Glass transition behavior of clay aerogel/poly (vinyl alcohol) composites10.1021/ma0611826 ↗
8. Temperature-responsive clay aerogel-polymer composites10.1021/ma051698+ ↗
9. Structure–property relationships in cross-linked polyester–clay nanocomposites10.1016/S0032-3861(02)00187-8 ↗
10. Biodegradable pectin/clay aerogels10.1021/am3028603 ↗
11. Facile fabrication of poly (vinyl alcohol) gels and derivative aerogels10.1016/j.polymer.2013.07.078 ↗
12. Fabrication and Properties of Irradiation-Cross-Linked Poly (vinyl alcohol)/Clay Aerogel Composites10.1021/am504418w ↗
13. Effects of Molecular Weight upon Irradiation-Cross-Linked Poly (vinyl alcohol)/Clay Aerogel Properties10.1021/acsami.5b05776 ↗
14. Chol · 1995 · Vol. 231 · 99
15. Studies on the crosslinking of poly (vinyl alcohol)10.1007/s10965-005-9023-9 ↗
16. New tannin–lignin aerogels10.1016/j.indcrop.2012.04.052 ↗
17. Ice-templated materials: sophisticated structures exhibiting enhanced functionalities obtained after unidirectional freezing and ice-segregation-induced self-assembly†10.1021/cm702028z ↗
18. Mineralization of clay/polymer aerogels: a bioinspired approach to composite reinforcement10.1021/am9001919 ↗
19. Heat transfer phenomena in fibrous insulating materials
20. Synthesis and characterization of Ag/PVA nanocomposite by chemical reduction method10.1016/j.matchemphys.2005.02.029 ↗
21. Enhancement of mechanical properties of polymeric nanofibers by controlling crystallization behavior using a simple freezing/thawing process10.1039/C7RA06545K ↗
22. High-Strength Nanocomposite Aerogels of Ternary Composition: Poly (vinyl alcohol), Clay, and Cellulose Nanofibrils10.1021/acsami.6b15561 ↗
23. Enhancing mechanical properties of clay aerogel composites: an overview10.1016/j.compositesb.2016.04.059 ↗
24. Physical properties of clay aerogel composites: an overview10.1016/j.compositesb.2016.06.057 ↗
25. Functional clay aerogel composites through hydrophobic modification and architecture of layered clays10.1016/j.clay.2017.01.013 ↗
26. FTIR spectroscopy characterization of poly (vinyl alcohol) hydrogel with different hydrolysis degree and chemically crosslinked with glutaraldehyde10.1016/j.msec.2007.10.088 ↗
27. Spectroscopic and corrosion resistance characterization of GLYMO–TEOS Ormosil coatings for aluminum alloy corrosion inhibition10.1016/S0300-9440(02)00063-2 ↗
28. Texture control of clay-aerogel through the crystallization process of ice
29. Ultrastrong and stiff layered polymer nanocomposites10.1126/science.1143176 ↗
30. Mechanical, rheological, and swelling behavior of natural rubber/montmorillonite aerogels prepared by freeze-drying10.1016/j.clay.2010.08.020 ↗
31. Solution cross-linked natural rubber (NR)/clay aerogel composites10.1021/ma102443k ↗
32. Synthesis and characterization of poly (vinyl alcohol) hydrogels and hybrids for rMPB70 protein adsorption10.1590/S1516-14392006000200014 ↗
33. Preparation and characterization of covalently bonded PVA/Laponite/HAPI nanocomposite multilayer freestanding films by layer-by-layer assembly10.1002/polb.23666 ↗
34. High-porosity aerogels of high specific surface area prepared from nanofibrillated cellulose (NFC)10.1016/j.compscitech.2011.07.003 ↗
35. Effect of 3-glycidoxypropyltrimethoxysilane precursor on the properties of ambient pressure dried silica aerogels10.1007/s10971-009-1926-1 ↗
36. Robust and fire retardant borate-crosslinked poly (vinyl alcohol)/montmorillonite aerogel via melt-crosslink
37. Crosslinking reaction of poly (vinyl alcohol) with glyoxal10.1007/s10965-009-9362-z ↗