journal article·2018-09

Potential use of the lower cretaceous clay (Kef area, Northwestern Tunisia) as raw material to supply ceramic industry

Imed Ben Salah, Ali Sdiri, Moufida Ben M'barek Jemai, Mabrouk Boughdiri

Publisher page

Abstract

Abstract The aim of this study is to evaluate the potential use of clay deposits from northern Tunisia (Albian system) for the manufacture of bricks and ceramic tiles. Clay samples were collected from the Slata study site to the north of the Kef district, Tunisia. Chemical composition by atomic absorption spectrometry (AAS) showed that these clays were mainly composed of silica (33%), alumina (15%), iron oxide (6%) and minor amount of potassium oxide (3%). Mineralogical analysis by X-ray diffraction (XRD) confirmed the results of AAS; it showed reflections of quartz, calcite, kaolinite (65–70%) and illite (15%) associated with low percentage of interstratified illite-smectite (5%). After firing near 900 °C, new mineralogical species such as mullite, anortite and spinel appeared due to several temperature-dependent transformations. Further analysis indicated that plasticity index (PI) ranged between 16 and 20%. Geotechnical and thermal tests have shown acceptable values of drying shrinkage (3%), firing shrinkage (10%), water absorption (8.9–15.9%) and a very high mechanical bending strength (17–20 MPa) indicating non-refractory clays. Those results further confirmed the potential application of the Albian clays from Slata site in ceramics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Albian oceanic anoxic events in northern Tunisia: biostratigraphic and geochemical insights
2. Ben M'barek · 2001
3. Characterization of the Ain Khemouda halloysite (western Tunisia) for ceramic industry10.1016/j.jafrearsci.2015.07.014 ↗
4. Reconstruction of the Late Cretaceous-Paleocene paleoenvironment (northern Tunisia) from biostratigraphy, geochemistry and clay mineralogy
5. Geological and technological characterization of the Late Jurassic-Early Cretaceous clay deposits (Jebel Ammar, Northeastern Tunisia) for ceramic industry10.1016/j.jafrearsci.2017.01.019 ↗
6. Chemical and technological characterization and beneficiation of Jezza sand (North West of Tunisia): potentialities of use in industrial fields10.1016/j.minpro.2016.01.016 ↗
7. Composition, firing behavior and ceramic properties of the Sejnène clays (Northwest Tunisia)10.1016/j.clay.2015.07.025 ↗
8. Identification and traditional ceramic application of clays from the Chouamekh region in south-eastern Tunisia10.1016/j.clay.2015.09.018 ↗
9. CEC of clays: measurement by adsorption of a copper ethylenediamine complex10.1016/S0169-1317(97)00012-4 ↗
10. Characterization of supplementary cementitious materials by thermal analysis
11. Characteristics and industrial application of the Lower Cretaceous clay deposits (Bouhedma Formation), Southeast Tunisia: potential use for the manufacturing of ceramic tiles and bricks10.1016/j.clay.2016.01.027 ↗
12. Chakraborty · 2014
13. The thermal behavior of kaolinite intercalation complexes-a review10.1016/j.tca.2012.04.005 ↗
14. Stratigraphy of the Hameima and lower Fahdene Formations in the Tadjerouine area (Northern Tunisia)10.1016/j.jafrearsci.2010.02.008 ↗
15. Blocs basculés au Crétacé inférieur dans la région du Kef (Tunisie nord-occidentale) Comptes Rendus l'Académie des Sci. - Ser. IIA
16. Dondi · 2016
17. Caractérisation et essai de valorisation de l'halloysite d'Ain Khemouda (Tunisie Centrale). Rev. la Société l'Industrie Minérale
18. Potentialité d'utilisation d'argiles marocaines de Jbel Kharrou dans l'industrie céramique10.1016/j.crte.2006.03.017 ↗
19. An experimental design for the optimization of brick manufacturing procedure: application on the late miocene clays, southern Tunisia10.1080/0371750X.2012.762154 ↗
20. Mineralogical study of kaolinitic clays from Sidi El Bader in the far north of Tunisia10.1016/j.clay.2007.06.004 ↗
21. Clay minerals in sediments of Portuguese reservoirs and their significance as weathering products from over-eroded soils: a comparative study of the Maranhão, Monte Novo and Divor Reservoirs (South Portugal)10.1007/s00531-009-0488-3 ↗
22. Production of ceramic bodies from Tunisian Cretaceous clays10.1180/claymin.2012.047.1.59 ↗
23. Chemical and mineralogical characterisation of a clay taken from the Moroccan meseta and a study of the interaction between its fine friction and methylene blue10.1016/S0169-1317(00)00041-7 ↗
24. Mineralogy and plasticity in clay sediments from north-east Tunisia10.1016/j.jafrearsci.2009.07.007 ↗
25. The potential use of Tithonian–Barremian detrital deposits from central Tunisia as raw materials for ceramic tiles and pigments10.1016/j.clay.2010.03.003 ↗
26. Potentiality of clay raw materials from Gram area (Northern Tunisia) in the ceramic industry10.1016/j.clay.2015.03.027 ↗
27. Holtz · 1981
28. INS Tunisie
29. ISO 10545-3
30. ISO 10545-4
31. Jamoussi · 2001
32. Répartition des minéraux argileux et contrôle tectono-eustatique dans les bassins de la marge tunisienne10.1016/S1631-0713(03)00014-2 ↗
33. Technological behaviour of some Tunisian clays prepared by dry ceramic processing10.1180/claymin.2008.043.3.01 ↗
34. The use of Dynamic Evolved Gas Analysis (DEGA) to resolve ceramic defects10.1016/j.clay.2013.10.021 ↗
35. Low-temperature FTIR study of kaolin-group minerals10.1346/CCMN.2008.0560408 ↗
36. Influence of firing temperature and mineralogical composition on bending strength and porosity of ceramic tile bodies10.1016/j.clay.2008.01.005 ↗
37. Ceramic behaviour of some clay deposits from Guayas province, Ecuador: preliminary study10.1016/j.clay.2014.09.028 ↗
38. Clay and man: clay raw materials in the service of man10.1016/0169-1317(95)00029-4 ↗
39. Identification of components in smectite/kaolinite mixtures10.1180/0009855023720042 ↗
40. FTIR techniques in clay mineral studies10.1016/S0924-2031(02)00065-6 ↗
41. The use of Tunisian Barremian clay in the traditional ceramic industry: optimization of ceramic properties10.1016/j.clay.2007.12.008 ↗
42. Characterization of Valangenian – Hauterivian clays of northwestern Tunisia for ceramic
43. Composition and ceramic properties of carbonate-bearing: illitic clays from north-eastern Tunisia10.1007/s13369-014-1145-0 ↗
44. Characterization and traditional ceramic application of clays from the Douiret region in South Tunisia10.1016/j.clay.2016.04.010 ↗
45. Determination and adjustment of drying parameters of Tunisian ceramic bodies10.1016/j.jafrearsci.2016.09.031 ↗
46. Pigment and terracotta analyses of Hellenistic figurines in Crete10.1016/j.aca.2003.08.035 ↗
47. Cretaceous crustal thinning in North Africa: implications for magmatic and thermal events in the Eastern Tunisian margin and the Pelagic Sea10.1016/j.jafrearsci.2009.04.011 ↗
48. Ceramic tiles based on central Tunisian clays (Sidi Khalif formation)10.1180/claymin.2012.047.2.02 ↗
49. Ceramic behaviour of five Chilean clays which can be used in the manufacture of ceramic tile bodies10.1016/j.clay.2009.11.056 ↗
50. Ceramic behaviour of some kaolins from Cauquenes Province (VII Region of Maule, Chile)10.1016/j.clay.2011.03.019 ↗
51. Moore · 1989
52. The science of clays: Applications in industry, engineering and environment
53. Subsurface geology of the Ariana region (Diapir Zone, northern Tunisia) by means of gravity analysis10.1111/j.1365-2478.2011.01004.x ↗
54. Clays from Neogene Achlada lignite deposits in Florina basin (Western Macedonia, N. Greece): a prospective resource for the ceramics industry10.1016/j.clay.2014.11.002 ↗
55. Pampuch · 2014
56. Pansu · 2006
57. Firing transformations of Chilean clays for the manufacture of ceramic tile bodies10.1016/j.clay.2010.11.022 ↗
58. Diapirism in Northern Tunisia10.1016/0191-8141(81)90019-5 ↗
59. Mineralogical and spectroscopic characterization, and potential environmental use of limestone from the Abiod formation, Tunisia10.1007/s12665-010-0450-5 ↗
60. Evaluating the adsorptive capacity of montmorillonitic and calcareous clays on the removal of several heavy metals in aqueous systems10.1016/j.cej.2011.05.015 ↗
61. Synthesis and characterization of silica gel from siliceous sands of southern Tunisia10.1016/j.arabjc.2010.11.007 ↗
62. Physical-chemical characterization of Tunisian clays for the synthesis of geopolymers materials10.1016/j.jafrearsci.2014.12.009 ↗
63. Methylene blue surface area method to correlate with specific soil properties10.1520/GTJ101429 ↗
64. Clay: an important raw material for prehistoric man10.1023/A:1012631023965 ↗
65. Performance enhancement of the ceramic products by adding the sand, chamotte and waste brick to a porous clay from Bir Mcherga (Tunisia)10.1016/j.clay.2017.04.015 ↗