Effect of thermochemical activation of clay raw materials on phase formation, microstructure and properties of aluminosilicate proppants
Source abstract
Abstract
Abstract In this study, the complex influence of the preliminary calcination temperature of refractory clay raw materials and mineralizing oxide additives on phase formation, microstructure and properties of aluminosilicate proppants was researched. The morphology structure and phase composition of specimens were investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results show that the effectiveness on the addition of 3d-transition element oxides (Fe2O3 and MnO2) and alkaline and alkaline earth oxides (Na2O, MgO, CaO) and B2O3 to the sintering process of samples based on kaolin depends on the temperature of preliminary kaolin calcination (900–1100 °C) and temperature sample sintering (1350–1450°C). Based on the effectiveness of the influence on aluminosilicate ceramic sintering at the temperature range of 1400–1450°C, the recommended additives can be sequentially arranged as follows: Fe2O3 > MgO > MnO2 > Na2O > B2O3 > CaO. The thermal activity scheme for each group of mineralizer additives depending on the temperature conditions of the consolidation process has been proposed in this study. The use of mineralizing additives with kaolin calcined at a temperature range of 980–1100 °C produces lightweight aluminosilicate proppants with bulk density of up to 1.50 g/cm3 at sintering calcination of 1400–1450 °C, which can endure destructive pressures up to 52 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Clay minerals and soil interactions · Iron and Steelmaking Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. API 19C · 2008
2. Interactions between different acids and bauxitic-based ceramic proppants used in gravel-packed and fractured wells10.1016/j.petrol.2017.08.075 ↗
3. The kaolinite-mullite reaction series: I. Survey of outstanding problems. II. Metakaolin. III. The high-temperature phases10.1111/j.1151-2916.1959.tb14314.x ↗
4. Budnikov · 1971 · 488
5. Solid solution limit of Fe2O3 in mullite crystals, produced from kaolin by solid state reactions10.1016/j.ceramint.2018.01.178 ↗
6. Mullite whisker network reinforced ceramic with high strength and lightweight10.1016/j.jallcom.2017.01.075 ↗
7. Fracture conductivity comparison of ceramic proppants10.2118/11634-PA ↗
8. Hydraulic fractures: how far can they go?10.1016/j.marpetgeo.2012.04.001 ↗
9. Preparation and properties of ultra-low density proppants for use in hydraulic fracturing10.1016/j.petrol.2017.10.024 ↗
10. Evaluation of ultra-light-weight proppants for shale fracturing10.1016/j.petrol.2012.06.010 ↗
11. Settling and slumping in a newtonian slurry, and implications for proppant placement during hydraulic fracturing of gas wells10.1016/0009-2509(95)00152-U ↗
12. Synthesis and microstructural evolution in iron oxide kaolinite based proppant as a function of reducing atmosphere, sintering conditions, and composition10.1016/j.ceramint.2018.03.047 ↗
13. Microstructure and fracture mechanism of low density ceramic proppants10.1016/j.matlet.2017.11.021 ↗
14. Preparation and characterization of low-density ceramic proppant containing coal gangue additive10.1080/14328917.2017.1376785 ↗
15. Kingery · 1976 · 1032
16. Influence of oxides of 3d transition metals on strength of synthetic mullite
17. Intensification of sintering and properties of kaolin chamotte parts10.1007/BF01605179 ↗
18. Feasible recycling of industrial waste coal gangue for preparation of mullite based ceramic proppant10.1088/1757-899X/230/1/012020 ↗
19. Sintering mechanism of high-intensity and low-density ceramic proppants prepared by recycling of waste ceramic sands
20. Low-temperature sintering of bauxite-based fracturing proppants containing CaO and MnO2 additives10.1016/j.matlet.2016.02.090 ↗
21. Strength enhancement of aluminosilicate aggregate through modified thermal treatment10.1111/j.1744-7402.2006.02064.x ↗
22. Effects of MnO2 and Fe2O3 on microstructure and crush resistance of alumina matrix fracturing proppant
23. Influence of sintering temperature on the microstructure and property of low-cost ceramic proppants prepared by adding purple sands10.1088/1757-899X/230/1/012021 ↗
24. Effect of mineralizers on the sintering of porcelain bodies10.1007/BF00701654 ↗
25. Household porcelain with mineralizing additives10.1023/A:1012870219895 ↗
26. Effect of raw material milling on ceramic proppants properties10.1016/j.clay.2017.12.009 ↗
27. Proppant selection: the key to successful fracture stimulation10.2118/12616-PA ↗
28. Hydraulic fracturing stimulation techniques and formation damage mechanisms—implications from laboratory testing of tight sandstone–proppant systems10.1016/j.chemer.2010.05.016 ↗
29. Influence of kaolin ignition temperature changes on the strength qualities of proppants
30. Solubility of TiO2, Fe2O3 and MgO in mullite10.1016/0272-8842(87)90042-3 ↗
31. Iron incorporation in mullite10.1016/0272-8842(86)90034-9 ↗
32. Volcanic ash as flux in clay based triaxial ceramic materials, effect of the firing temperature in phases and mechanical properties10.1016/j.ceramint.2014.12.123 ↗
33. Manufacturing process and properties of spherical granules in the MgO—Al2O3—SiO2 system10.1007/BF02770606 ↗
34. Formation of short prismatic and isometric mullite and its effect on the refractoriness and wear of chamotte parts10.1007/BF01326479 ↗
35. Determination of loamy resources impact on granulation of ceramic proppants and their properties10.1016/j.clay.2018.09.032 ↗
36. The exploration of making acidproof fracturing proppants using red mud10.1016/j.jhazmat.2008.03.032 ↗
37. Special features of phase formation in fireclay in the presence of topaz
38. Criteria for selecting clay initial materials for making aluminum silicate propants10.1007/s10717-010-9199-2 ↗
39. Activation of synthesis and sintering of mullite aluminosilicate ceramics based on natural raw materials10.4028/www.scientific.net/AMR.1040.268 ↗
40. Alumosilicate ceramic proppants based on natural refractory raw materials10.1088/1757-899X/286/1/012012 ↗
41. An overview of recent advances in hydraulic fracturing technology
42. Acid resistance of silicon-free ceramic proppant10.1016/j.matlet.2012.10.124 ↗
43. Preparation and characterization of ceramic proppants with low density and high strength using fly ash10.1016/j.jallcom.2017.01.262 ↗