Influence of chemical composition of Brazilian organoclays on the morphological, structural and thermal properties of PLA-organoclay nanocomposites
Source abstract
Abstract
The effects of adding different Brazilian organoclays, containing di-(hydrogenated tallow) dimethyl ammonium chloride (HTA), trihexyl tetradecyl phosphonium chloride (TDP), di(alkyl ester) dimethyl ammonium chloride (EA) and ethoxylated tallow amine (ETA), on the structure and properties of poly(lactic acid) (PLA) nanocomposites, are presented. Single and hybrid organo-modified montmorillonites (OMt and HOMt, respectively) were used to prepare nanocomposites by melt mixing in a twin screw extruder. The structural and morphological properties of the nanocomposites were evaluated using wide-angle X-ray diffraction and transmission electron microscopy. The thermal behavior was studied by differential scanning calorimetry. Fourier-transform infrared spectroscopy was used to investigate the interactions between the different organoclays and PLA. Additionally, commercial organoclays (Cloisite 30B and Cloisite 20A) were used and compared with the Brazilian organoclays. It was verified that the structure and properties of the nanocomposites highly depended on chemical composition. Comparatively, HOMt containing EA and ETA presented better compatibility with PLA, showing the best level of clay dispersion. Differential scanning calorimetry showed a dependence on the nanocomposite thermal behavior with the dispersion level of the organoclays. In general, the presence of OMt and HOMt reduced the glass transition temperature of PLA and its cold crystallization temperature, and increased its crystallinity, which was related to an effective heterogeneous crystal nucleation promoted by the organoclay
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Polymer Nanocomposites and Properties · Silicone and Siloxane Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (91)
Show source-provided references
1. Flow induced orientation of multiwalled carbon nanotubes in polycarbonate nanocomposites: rheology, conductivity and mechanical properties10.1016/j.polymer.2009.12.041 ↗
2. Rheological properties of poly(lactic acid) based nanocomposites: effects of different organoclay modifiers and compatibilizers10.1002/app.42915 ↗
3. Synergistic effects in epoxy functionalized graphene and modified organo-montmorillonite PLA/PBAT blends10.1016/j.clay.2018.02.028 ↗
4. Desenvolvimento de Nanocompósitos a partir de Blendas com Matriz de PA610.1590/S0104-14282011005000062 ↗
5. Polylactides—chemistry, properties and green packaging technology: a Review10.1080/10942910903125284 ↗
6. A comparative study of different routes for the modification of montmorillonite with ammonium and phosphonium salts10.1016/j.clay.2016.07.018 ↗
7. Study of selection and purification of Brazilian bentonite clay by elutriation: a XRF, SEM and Rietveld analysis10.1590/0366-691320 ↗
8. Evaluation of organic modification of montmorillonite with ionic and nonionic surfactants10.1016/j.clay.2017.09.001 ↗
9. Hybrid organo-montmorillonite produced by simultaneous intercalation of phosphonium and ammonium/amine based surfactants10.1016/j.matchemphys.2018.07.040 ↗
10. Influence of clay organic modifier on the thermal-stability of PLA based nanocomposites10.1016/j.clay.2013.12.005 ↗
11. Mg–Al Layered double hydroxide nanoparticles10.1016/j.clay.2010.12.024 ↗
12. Multifunctional nanostructured PLA materials for packaging and tissue engineering10.1016/j.progpolymsci.2013.05.010 ↗
13. Silane functionalization of sodium montmorillonite nanoclay and its effect on rheological and mechanical properties of HDPE/clay nanocomposites10.1016/j.clay.2017.06.035 ↗
14. Novel toughened polylactic acid nanocomposite: mechanical, thermal and morphological properties10.1016/j.matdes.2010.02.008 ↗
15. Handbook of Clay Science
16. End-life prediction of commercial pla used for food packaging through short term TGA experiments: real chance or low reliability10.1007/s10118-014-1453-6 ↗
17. The Rediscovery of POSS: a Molecule rather than a Filler10.3390/polym10080904 ↗
18. Synthesis and characterization of differently substituted phenyl hepta isobutyl-polyhedral oligomeric silsesquioxane/polystyrene nanocomposites10.1002/pc.22644 ↗
19. Effect of combinations of nanofillers on rheology-structure relations in biodegradable poly(ε-caprolactone) nanocomposites10.1016/j.clay.2018.04.006 ↗
20. Poly(lactic acid)—mass production, processing, industrial applications, and end of life10.1016/j.addr.2016.03.010 ↗
21. Ploy (lactic acid)/organo-modified montmorillonite nanocomposites for improved eletret properties10.1016/j.elstat.2016.01.001 ↗
22. Ductile polylactic acid prepared with ionic liquids10.1016/j.cej.2012.11.078 ↗
23. Improvement of thermal conductivities and mechanical properties for polyphthalonitrile nanocomposites via incorporating functionalized h-BN fillers10.1177/0954008318765066 ↗
24. Thermal properties and flammability of polylactide nanocomposites with aluminum trihydrate and organoclay10.1016/j.carbpol.2011.08.065 ↗
25. Polylactide (PLA) filaments a biobased solution for additive manufacturing: Correlating rheology and thermomechanical properties with printing quality10.3390/ma11071191 ↗
26. Conductivity enhancement of carbon nanotube and nanofiber-based polymer nanocomposites by melt annealing10.1016/j.polymer.2008.08.057 ↗
27. Hybrid SiO2@POSS nanofiller: a promising reinforcing system for rubber nanocomposites10.1039/C7QM00045F ↗
28. Kolsuz-Ulukisla-Nigde Clays, central Anatolian Region – Turkey and petroleum exploration
29. Dynamic mechanical analysis of injection-moulded discs of polypropylene and untreated and silane-treated talc-filled polypropylene composites10.1016/S0032-3861(98)00754-X ↗
30. Aggregative Structure of the 1-Octadecyl-3- methylimidazolium Cation in the Interlayer of Montmorillonite and its effect on Polypropylene Melt Intercalation10.1002/polb.21145 ↗
31. Partially exchanged organophilic bentonites - part I. characterization by thermal analysis on calcined mass basis10.1007/s10973-010-1254-2 ↗
32. Crystallization and thermal properties of Poly(Lactic Acid)
33. Investigation of the structure of solution grown crystals of lactide copolymers by means of chemical reactions10.1007/BF01498927 ↗
34. Synthesis of an intercalated compound of montmorillonite and 6-polyamide10.1007/BF00664105 ↗
35. Effect of clay type and loading on thermal, mechanical properties and biodegradation of poly(lactic acid) nanocomposites10.1016/j.reactfunctpolym.2013.01.003 ↗
36. Effect of Organoclay Mixture on the Rheological Properties of ABS-Clay Nanocomposites10.1002/masy.201100165 ↗
37. Influence of crystallinity on the fracture toughness of poly(lactic acid)/montmorillonite nanocomposites prepared by twin-screw extrusion10.1002/app.33191 ↗
38. Thermal stability of polycarbonate-graphene nanocomposite foams10.1016/j.polymdegradstab.2012.05.027 ↗
39. The effect of the mixing routes of biodegradable polylactic acid and polyhydroxybutyrate nanocomposites and compatibilised nanocomposites
40. Flammability and thermal properties of polycarbonate /acrylonitrile-butadiene-styrene nanocomposites reinforced with multilayer graphene10.1016/j.polymdegradstab.2015.06.013 ↗
41. Poly(lactic acid)/graphene oxide-ZnO nanocomposite films with good mechanical, dynamic mechanical, anti-UV and antibacterial properties10.1002/jctb.4476 ↗
42. Ultrasound assisted twin screw extrusion of polymer – nanocomposites containing carbon nanotubes10.1016/j.polymer.2008.10.052 ↗
43. Relationship between the solubility parameter of polymers and the clay dispersion in polymer/clay nanocomposites and the role of the surfactant10.1021/ma0508909 ↗
44. Comparison of polylactide/nano-sized calcium carbonate and polylactide/montmorillonite composites: reinforcing effects and toughening mechanisms10.1016/j.polymer.2007.11.001 ↗
45. Effect of mixing conditions on mechanical properties of polylactide/montmorillonite clay nanocomposites
46. Flammability properties of polymer nanocomposites with single-walled carbon nanotubes: effects of nanotube dispersion and concentration10.1016/j.polymer.2004.10.087 ↗
47. Comparative study of PLA nanocomposites reinforced with clay and silica nanofillers and their mixtures10.1002/app.34234 ↗
48. The role of nanofillers on the degradation behavior of polylactic acid10.1002/pc.21258 ↗
49. Cohesive properties and solubility
50. Poly (L-Lactic Acid)/Layered Silicate Nanocomposite: fabrication, characterization, and properties10.1021/cm034369+ ↗
51. Interactions of alkylamines with different types of layered compounds10.1016/0167-2738(86)90057-3 ↗
52. Unusual mechanical properties of melt-blended poly(lactic acid) (PLA)/clay nanocomposites10.1016/j.eurpolymj.2013.12.012 ↗
53. Influence of crystallinity and stereochemistry on the enzymatic degradation of poly(lactide)s10.1021/ma990117b ↗
54. A Flory–Huggins model based on the Hansen solubility parameters10.1016/S0378-3812(02)00184-X ↗
55. Kinetics of thermo-oxidative and thermal degradation of poly(d,l-lactide) (PDLLA) at processing temperature10.1016/j.polymdegradstab.2006.07.004 ↗
56. Effect of polymer/organoclay composition on morphology and rheological properties of Polylactide Nanocomposites10.1002/pc.23424 ↗
57. Structure and thermal behavior of poly(L-lactic acid) clay nanocomposites: effect of preparation method as a function of the nanofiller modification level10.1002/app.35328 ↗
58. Organoclay polybutylene terephthalate nanocomposites using dual surfactant modified montmorillonite prepared by the masterbatch method
59. Crystallinity development in cellular poly(lactic acid) in the presence of supercritical carbon dioxide10.1002/app.30338 ↗
60. Dynamic mechanical and thermal properties of polylactide-layered silicate nanocomposites10.1177/0892705712454446 ↗
61. Effect of nanoclay-type and PLA optical purity on the characteristics of PLA-based nanocomposite films10.1016/j.jfoodeng.2013.01.021 ↗
62. PLA composites: from production to properties10.1016/j.addr.2016.04.003 ↗
63. Evaluation of crystallinity and gas barrier properties of films obtained from PLA nanocomposites synthesized via “in situ” polymerization of L-lactide with silane-modified nanosilica and montmorillonite10.1016/j.eurpolymj.2015.03.006 ↗
64. Effect of crystallinity and loading-rate on mode i fracture behavior of poly(lactic acid)10.1016/j.polymer.2005.12.046 ↗
65. Polymer nanotechnology: nanocomposites10.1016/j.polymer.2008.04.017 ↗
66. Optimum loading level of nanoclay in PLA nanocomposites: impact on the mechanical properties and glass transition temperature10.1177/0892705712473627 ↗
67. Melt compounding of Polylactide/Organoclay: structure and properties of nanocomposites10.1002/polb.20957 ↗
68. Plasticized polylactide/clay nanocomposites. I. the role of filler content and its surface organo-modification on the physico-chemical properties10.1002/polb.20694 ↗
69. New ternary PLA/organoclay-hydrogel nanocomposites: design, preparation and study on thermal, combustion and mechanical properties10.1016/j.matdes.2016.08.059 ↗
70. Effect of organic modifiers on dispersion of organoclay in polymer nanocomposites to improve mechanical properties10.1016/j.polymer.2016.05.066 ↗
71. Polymer/layered silicate nanocomposites: a review from preparation to processing10.1016/j.progpolymsci.2003.08.002 ↗
72. New polylactide/layered silicate nanocomposites. 1. Preparation, characterization, and properties10.1021/ma011613e ↗
73. New polylactide-layered silicate nanocomposites. 2. Concurrent improvements of material properties, biodegradability and melt rheology10.1016/S0032-3861(02)00818-2 ↗
74. New polylactide/layered silicate nanocomposites. 5. Designing of materials with desired properties10.1016/j.polymer.2003.08.021 ↗
75. PLA and Montmorilonite nanocomposites: properties, Biodegradation and potential Toxicity10.1007/s10924-013-0577-z ↗
76. Stuart · 2004
77. Synthesis of polylactide/clay nanocomposites by in situ intercalative polymerization in supercritical carbon dioxide10.1016/j.eurpolymj.2008.11.033 ↗
78. Utracki · 2004
79. Clays for polymeric nanocomposites10.1002/pen.21807 ↗
80. Polymer melt Intercalation in organically-Modified Layered Silicates: model predictions and experiment10.1021/ma9603488 ↗
81. Foaming behaviour and cellular structure of LDPE/hectorite nanocomposites10.1016/j.polymer.2007.02.008 ↗
82. Nanocomposites combustion peculiarities. A case history: Polylactide-clays10.1016/j.eurpolymj.2012.11.010 ↗
83. Thermal, oxygen barrier and mechanical properties of polylactide–organoclay nanocomposites10.1016/j.compscitech.2013.03.015 ↗
84. Synthesis of polymer montmorillonite nanocomposites by in situ intercalative polymerization10.1088/0957-4484/13/5/301 ↗
85. Influence of four different types of organophilic clay on the morphology and thermal properties of polystyrene/clay nanocomposites prepared by using the γ-ray irradiation technique10.1016/j.eurpolymj.2003.08.006 ↗
86. Crystal modifications and thermal behavior of Poly (L -lactic acid) revealed by infrared Spectroscopy10.1021/ma051232r ↗
87. Disorder-to-order phase transition and multiple melting behavior of poly(L-lactide) investigated by simultaneous measurements of WAXD and DSC10.1021/ma0706071 ↗
88. The flame retardancy of blob-like multi-walled carbon nanotubes/silica nanospheres hybrids in poly (methyl methacrylate)10.1016/j.polymdegradstab.2012.06.014 ↗
89. Thermal conductivity and thermo-physical properties of nanodiamond-attached exfoliated hexagonal boron nitride/epoxy nanocomposites for microelectronics10.1016/j.compositesa.2017.06.019 ↗
90. Nanodiamond nanocluster-decorated graphene oxide/epoxy nanocomposites with enhanced mechanical behavior and thermal stability10.1016/j.compositesb.2017.01.051 ↗
91. Nanoclay and crystallinity effects on the hydrolytic degradation of polylactides10.1016/j.polymdegradstab.2008.05.014 ↗