journal article·2016-06

The influence of clay orientation and crystallinity on oxygen permeation in dispersion barrier coatings

Å. Nyflött, E. Moons, C. Bonnerup, G. Carlsson, L. Järnström, M. Lestelius

Publisher page

Abstract

In this study oxygen permeability in dispersion barriers produced from poly(vinyl alcohol) (PVOH) and kaolin clay blends coated onto polymeric supports was investigated. To determine the oxygen permeability, two measurement methods were used: the oxygen transmission rate (OTR) and the ambient oxygen ingress rate (AOIR). It was found that with increasing kaolin content the oxygen permeability increased, up to about 5 wt% kaolin, whereafter the oxygen permeability decreased, as was expected. The increased (> 5%) kaolin loading lowered the diffusion because of an increased tortuosity. Structural information about the dispersion-barrier coatings, such as kaolin orientation and polymer crystallinity, was obtained from Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Kaolin orientation was influenced by the drying temperature, the thickness of the samples, and the kaolin concentration. The polymer crystallinity increased in thicker samples. The drying temperature did not show any clear effect on the crystallinity of thin samples, while for the thicker barriers, combined with a kaolin concentration lower than 20 wt%, a higher crystallinity was achieved at lower drying temperatures. This study demonstrates the strong influence of chemical and physical structures on the permeability of the investigated coatings.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Polymer Nanocomposites and Properties · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Calculating tortuosity in quasi-random anisotropic packings10.3183/NPPRJ-2006-21-05-p670-675 ↗
2. New ways to enhance the functionality of paperboard by surface treatment - a review10.1002/pts.823 ↗
3. Barrier properties and heat sealability/failure mechanisms of dispersion-coated paperboard10.1002/pts.590 ↗
4. Critical pigment volume relationships10.1021/ie50475a042 ↗
5. Barrier properties created by dispersion coating10.32964/TJ12.4.45 ↗
6. Oxygen sorption and transport in amorphous poly(ethylene furanoate)10.1016/j.polymer.2014.07.041 ↗
7. Use the infrared spectroscopy to characterize clay intercalation and exfoliation in polymer nanocomposites10.1021/ma0628329 ↗
8. Crank · 1979
9. Texture and orientation of kaolin in coatings10.1180/000985599546109 ↗
10. Infrared absorption of hydroxyl groups in kaolinite10.1126/science.145.3637.1189 ↗
11. The time lag in diffusion10.1021/j150547a018 ↗
12. Production of active PET films: evaluation of scavenging activity10.1002/pts.794 ↗
13. Effect of clay concentration on the oxygen permeability and optical properties of a modified poly(vinyl alcohol)
14. Mold-free Shelf-life extension of bakery products by active packaging10.1111/j.1365-2621.2003.tb07059.x ↗
15. Oxygen-barrier properties of cold-crystallized and melt-crystallized poly(ethylene terephthalate-co-4,4′-bibenzoate)10.1002/polb.10307 ↗
16. Microbial and biochemical spoilage of foods: an overview10.1016/0168-1605(96)01139-7 ↗
17. Renewable fibers and bio-based materials for packaging applications - a review of recent developments10.15376/biores.7.2.2506-2552 ↗
18. Past, current and potential utilisation of active and intelligent packaging systems for meat and muscle-based products: a review10.1016/j.meatsci.2006.04.024 ↗
19. Adsorption of poly(vinyl alcohol) onto hydrophobic substrates. A general approach for hydrophilizing and chemically activating surfaces10.1021/ma021681g ↗
20. Ambient oxygen ingress rate method an alternative method to Ox-Tran for measuring oxygen transmission rate of whole packages10.1002/pts.519 ↗
21. Oxygen solubility and specific volume of rigid amorphous fraction in semicrystalline poly(ethylene terephthalate)10.1016/S0032-3861(02)00278-1 ↗
22. Evaluating the migration of ingredients from active packaging and development of dedicated methods: a study of two iron-based oxygen absorbers10.1080/0265203021000060878 ↗
23. Solution of gases in polyethylene terephthalate10.1063/1.1729066 ↗
24. Analysis of modeling results for barrier properties in ordered nanocomposite systems10.1016/j.memsci.2008.11.021 ↗
25. Barrier properties of organic-inorganic hybrid coatings based on polyvinyl alcohol with improved water resistance10.1002/pen.21440 ↗
26. A comprehensive model for mass transport properties in nanocomposites10.1016/j.memsci.2011.06.036 ↗
27. Models for the permeability of filled polymer systems10.1080/10601326708053745 ↗
28. Influence of kaolin addition on the dynamics of oxygen mass transport in polyvinyl alcohol dispersion coatings10.3183/NPPRJ-2015-30-03-p385-392 ↗
29. On the crystallinity of PVA/palm leaf biocomposite using DSC and XRD techniques10.1007/s00542-013-1882-0 ↗
30. Infrareda spectroscopy of semicrystalline poly(vinyl alcohol) networks10.1002/macp.1977.021780228 ↗
31. Differential scanning calorimetry of crystallized PVA hydrogels10.1002/app.1976.070200604 ↗
32. Powder Diffraction Files, P.-R. · 2013
33. Natural micro and nanobiocomposites with enhanced barrier properties and novel functionalities for food biopackaging applications10.1016/j.tifs.2010.07.008 ↗
34. A particle motion model for the study of consolidation phenomena10.1016/j.compchemeng.2009.03.001 ↗
35. Influence of colloidal interactions on pigment coating layer structure formation10.1016/j.jcis.2009.01.005 ↗
36. Differential scanning calorimetry (DSC) of semicrystalline polymers10.1007/s00216-009-3169-y ↗
37. Diffusion behavior in polymer-clay nanocomposites10.1002/polb.20684 ↗
38. Structure and properties of poly(vinyl alcohol)/Na+ montmorillonite nanocomposites10.1021/cm000506g ↗
39. Determination of the degree of crystallinity of poly(vinyl alcohol) by FTIR spectroscopy10.1007/s10812-012-9634-y ↗
40. Vieth · 1991
41. Dual sorption theory10.1016/S0376-7388(00)82267-X ↗
42. Preparation and properties of poly(vinyl alcohol)-clay nanocomposite materials10.1016/S0032-3861(03)00062-4 ↗
43. Evaluation of polypropylene/montmorillonite nanocomposites as food packaging material10.1007/s00289-012-0722-1 ↗