Firing transformations and properties of tiles from a clay from Burkina Faso
Source abstract
Abstract
A clay from Burkina Faso consisting of poorly crystallised kaolinite (66 mass %), illite (10 mass %) and quartz (13 mass %) was used in the production of tiles. The changes during the sintering process were investigated by X-ray diffraction (XRD), dilatometric measurements and scanning electron microscopy (SEM). Mainly metakaolinite, Al-spinel and mullite were formed when the temperature increased to 1100 °C. The tiles formed at 1100 °C had an acceptable flexural strength value (27.3 MPa), a slightly high water absorption value (16.9%) and a linear shrinkage value of 2.5% at 1100 °C. Because of its high water absorption value, the clay should be amended with sand, feldspar and talc as fluxing agents to obtain the required tile performances.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Geotechnical and construction materials studies · Recycling and utilization of industrial and municipal waste in materials production · Clay minerals and soil interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.