On the role of ultrasound and mechanical stirring for iodide adsorption by calcined layered double hydroxides
Source abstract
Abstract
[EN]Improving the adsorption of long-term radioactive species in the underground disposal of waste waters from nuclear reactors is a key issue. The natural metal oxides or hydroxides underground have the low retention ability of anionic species. Here, calcined Mg/Al LDHs were used as adsorbents. The influence on the adsorption capacity of different intercalated guest anions (carbonate (CO32-) and nitrate (NO3-)) in the parent LDH was investigated, along with the effect of ultrasonication. Two Mg/Al molar ratios (3/1 and 2/1) were compared. Adsorption capacity was strongly affected by material textural properties, and the carbonate LDH-derived mixed oxides showed the largest adsorption capacity. Mixed oxides with an Mg/Al molar ratio equal to 3 presented higher iodide adsorption due to their lower charge density. The adsorption assisted by ultrasound increased iodide removal efficiency by reducing internal diffusion limitation. Two models were used to determine adsorption capacity: Langmuir and Freundlich. The iodide adsorption was best fitted by the Langmuir equilibrium model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Layered Double Hydroxides Synthesis and Applications · Covalent Organic Framework Applications · Chemical Synthesis and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Hydrotalcite-type anionic clays: preparation, properties and applications10.1016/0920-5861(91)80068-K ↗
2. Sono-assisted preparation of magnetic magnesium–aluminum layered double hydroxides and their application for removing fluoride10.1016/j.ultsonch.2010.10.001 ↗
3. Increasing the basicity and catalytic activity of hydrotalcites by different synthesis procedures10.1016/j.jcat.2004.04.027 ↗
4. DFT simulation of Mg/Al hydrotalcite with different intercalated anions: periodic structure and solvating effects on the iodide/triiodide redox couple
5. 2006
6. A study of structural memory effects in synthetic hydrotalcites using environmental SEM10.1016/j.matlet.2004.08.035 ↗
7. Frederick · 1965
8. Application of layered double hydroxides for removal of oxyanions: a review10.1016/j.watres.2007.10.043 ↗
9. Pore-and-solid-diffusion kinetics in fixed-bed absorption under constant-pattern conditions10.1021/i160018a011 ↗
10. Characterization of repeatedly reconstructed Mg–Al hydrotalcite-like compounds, gradual segregation of aluminum from the structure10.1021/cm980478q ↗
11. Vanadium (IV) sorption by chitosan: kinetics and equilibrium10.1016/0043-1354(95)00154-9 ↗
12. Rapid aqueous release of fission products from high burn-up LWR fuel: experimental results and correlations with fission gas release10.1016/j.jnucmat.2011.09.007 ↗
13. About the possible upgrade of bentonite with respect to iodide retention capacity10.1016/j.clay.2006.08.001 ↗
14. Characterization and boron adsorption capacity of vermiculite modified by thermal shock or H2O2 reaction and/or sonication10.1016/j.clay.2010.03.004 ↗
15. Ultrasound assisted synthesis of Ca–Al hydrotalcite for U (VI) and Cr (VI) adsorption10.1016/j.cej.2012.12.051 ↗
16. Adsorption behavior of calcined layered double hydroxides towards removal of iodide contaminants10.1007/s10967-007-0740-x ↗
17. Uptake of chloride ion from aqueous solution by calcined layered double hydroxides: equilibrium and kinetic studies10.1016/j.watres.2005.11.043 ↗
18. Factors influencing the removal of fluoride from aqueous solution by calcined Mg–Al–CO3 layered double hydroxides10.1016/j.jhazmat.2005.10.012 ↗
19. Prediction of iodide adsorption on oxides by surface complexation modeling with spectroscopic confirmation10.1016/j.jcis.2008.12.037 ↗
20. The potential effectiveness of mercury minerals in decreasing the level of iodine-129 in a nuclear fuel waste disposal vault
21. Use of anion clay hydrotalcite to remove colored organics from aqueous solutions10.1016/S1383-5866(02)00158-2 ↗
22. Use of hydrotalcites for the removal of toxic anions from aqueous solutions10.1021/ie101104r ↗
23. The use of hydrotalcite as an anion absorbent10.1021/ie00043a023 ↗
24. Thermal characteristics of a synthetic hydrotalcite-like material10.1039/jm9920201069 ↗
25. Cyanoethylation of alcohols by activated Mg–Al layered double hydroxides: influence of rehydration conditions and Mg/Al molar ratio on Brönsted basicity10.1021/jp1011457 ↗
26. Anion capture with calcium, aluminium and iron containing layered double hydroxides10.1016/j.jnucmat.2010.11.101 ↗
27. Interlayer structure of iodide intercalated layered double hydroxides (LDHs)10.1016/j.jcis.2010.01.013 ↗
28. Ammonia induced precipitation of cobalt hydroxide: observation of turbostatic disorder10.1016/S1293-2558(03)00086-4 ↗
29. Removal of chloride anion by calcined layered double hydroxides
30. Crystallization of layered double hydroxides by ultrasound and the effect of crystal quality on their surface properties10.1346/000986002320514244 ↗
31. Removal of radioiodine from liquid effluents10.1016/S0956-053X(97)00034-2 ↗
32. Ultrasound-assisted adsorption of basic dye onto organically modified bentonite (nanoclay)
33. Suárez · Nucl. Inst. Methods Phys. Res. A · 1996 · 369 · 40710.1016/S0168-9002(96)80019-2 ↗
34. Adsorption behavior of IO3− by CO32− and NO3− hydrotalcite10.1016/S0169-1317(02)00108-4 ↗
35. Adsorption of anionic species on hydrotalcite-like compounds: effect of interlayer anion and crystallinity10.1016/S0169-1317(00)00026-0 ↗
36. Case study of the sonochemical decolouration of textile azo dye Reactive Black 510.1016/j.jhazmat.2006.07.005 ↗
37. Effect of interlayer anion on the physicochemical properties of zinc aluminium hydrotalcites10.1023/A:1018561918863 ↗
38. The distribution and transformations of iodine in the environment10.1016/0160-4120(84)90139-9 ↗