journal article·2025-12Open access

Microwave-synthesized composite preformed particle gels based on tragacanth gum and palygorskite for high-salinity high-temperature conditions

Ahmed Ben Ali, Saeed Al-Meer, Mustafa S. Nasser, Ibnelwaleed A. Hussein

Abstract

Preformed particle gels (PPGs) emerged as promising materials for water management in mature oil reservoirs, particularly in heterogeneous carbonate formations characterized by high-permeability zones and fractures. In this study, hybrid composite PPGs were synthesized using tragacanth gum (TG), a biodegradable polysaccharide, grafted with acrylamide (AM) and crosslinked with N , N ′-methylene bisacrylamide (MBA) in the presence of palygorskite (Pal) clay sourced from Qatar's Midra Shale. A microwave-assisted free-radical polymerization technique facilitated the rapid formation of gel particles with well-integrated organic-inorganic networks. Comprehensive characterization using XRD, XRF, FTIR, SEM, and TGA confirmed Pal's successful grafting, thermal reinforcement, and morphological integration into the PPG matrix. Swelling behavior in real Gulf seawater (TDS = 45,2 mg/L) and rheological measurements taken at elevated temperatures (80 °C and 100 °C) showed that the addition of Pal enhanced gel rigidity but slightly reduced swelling capacity, likely due to increased steric hindrance. The formulation TPAC 2 (2.5 g Pal) exhibited an optimal balance between swelling (14.2 g/g at 100 °C) and mechanical strength, making it a strong candidate for reservoir applications. These findings highlighted the potential of TG–Pal composite gels as environmentally friendly, thermally stable PPGs suitable for high-salinity, high-temperature conditions.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Polysaccharides Composition and Applications · Aerogels and thermal insulation · Hydrogels: synthesis, properties, applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Laboratory evaluation of water-swellable materials for fracture shutoff
2. Challenges in completing long horizontal wells selectively10.2118/116541-PA ↗
3. Evaluation of novel preformed particle gel system for conformance control in mature oil reservoirs10.3390/gels10010070 ↗
4. A rheological investigation of a high temperature organic gel used for water shut-off treatments10.1016/j.petrol.2007.02.010 ↗
5. Aly · 2018
6. Microwave-assisted synthesis of PAM preformed particle gels reinforced with carbon nanomaterials for conformance control in oil recovery10.1016/j.fuel.2022.125650 ↗
7. An environmentally friendly and low-cost alginate-based gel for water management in petroleum reservoirs: characterization and efficacy investigation10.1016/j.petlm.2025.03.003 ↗
8. Preformed particle gel for conformance control: factors affecting its properties and applications10.2118/89389-PA ↗
9. Preformed particle gel for conformance control: transport mechanism through porous media10.2118/89468-PA ↗
10. Field and lab experience with a successful preformed particle gel conformance control technology
11. Halloysite-derived hierarchical cobalt silicate hydroxide hollow nanorods assembled by nanosheets for highly efficient electrocatalytic oxygen evolution reaction10.1016/j.jmst.2024.07.045 ↗
12. Rheological properties and swelling behavior of nanocomposite preformed particle gels based on starch-graft-polyacrylamide loaded with nanosilica10.1007/s00397-021-01287-z ↗
13. Impact of composition and salinity on swelling and gel strength of poly (acrylamide-co-acrylic acid) preformed particle gel
14. Development of agar-based preformed particle gel for water control in high-salinity reservoirs10.1021/acs.iecr.4c00582 ↗
15. Carboxymethyl cellulose-based preformed particle gels for water management in oil and gas reservoirs10.1016/j.geoen.2024.213164 ↗
16. Physicochemical properties, biological properties and applications of gum tragacanth-a review
17. Qualification and deployment of a unique polymer conformance control system
18. A novel highly dispersed calcium silicate hydrate nanosheets for efficient high-concentration Cu2+ adsorption10.1016/j.jhazmat.2024.134774 ↗
19. Palygorskite, chlorite and illite minerals in the dukhan sabkha deposits, Qatar
20. Development of eco-friendly chitosan-g-polyacrylamide preformed particle gel for conformance control in high-temperature and high-salinity reservoirs10.1016/j.geoen.2023.212136 ↗
21. Biodegradable preformed particle gel (PPG) made of natural chitosan material for water shut-off application10.3390/polym15081961 ↗
22. Polymer systems for water shutoff and profile modification: a review over the last decade10.2118/163100-PA ↗
23. Experimental work to determine the effect of load pressure on the gel pack permeability of strong and weak preformed particle gels10.1016/j.fuel.2016.10.001 ↗
24. Chemical water shutoff agents and their plugging mechanism for gas reservoirs: a review and prospects10.1016/j.jngse.2022.104658 ↗
25. Polymeric formulations used for loss circulation materials and wellbore strengthening applications in oil and gas wells: a review10.1016/j.petrol.2019.05.022 ↗
26. Determination of swelling behavior and mechanical and thermal resistance of acrylamide-acrylic acid copolymers under high pressures and temperatures10.1021/acsomega.1c02638 ↗
27. Pushing the limits for field development
28. Multiple salinity equilibria and resilience of Persian/Arabian Gulf Basin salinity to brine discharge10.3389/fmars.2020.00573 ↗
29. Geochemical and petrophysical characterization of the Midra Shale, Qatar10.1016/j.jnggs.2025.02.002 ↗
30. Methodologies and solutions to remediate inter-well communication problems on the SACROC CO2 EOR project – a case study
31. Experimental study of swelling and rheological behavior of preformed particle gel used in water shutoff treatment10.1016/j.petrol.2018.06.029 ↗
32. Investigation on preparation and profile control mechanisms of the dispersed particle gels (DPG) formed from phenol-formaldehyde cross-linked polymer gel10.1021/acs.iecr.6b00055 ↗
33. Quantitative phase analysis method of palygorskite based on XRD orientational sample analysis and Rietveld full spectrum fitting10.1016/j.clay.2023.107222 ↗
34. Distribution of salinity and trace elements in surface seawater of the Arabian Gulf surrounding the State of Qatar10.5004/dwt.2019.23316 ↗
35. Investigation and characterization of a robust nanocomposite preformed particle gel for enhanced oil recovery10.1021/acs.energyfuels.9b00778 ↗
36. Progress of research into preformed particle gels for profile control and water shutoff techniques10.3390/gels10060372 ↗
37. Preformed particle gel: evaluation and optimization of salinity and pH on equilibrium swelling ratio10.1007/s13202-012-0024-z ↗
38. Recent progress in the industrial and biomedical applications of tragacanth gum: a review10.1016/j.carbpol.2019.02.076 ↗
39. Gum tragacanth: structure, characteristics and applications in foods10.1016/j.ijbiomac.2020.05.214 ↗
40. An assessment of seawater desalination impact on salinities in the Arabian / Persian Gulf using a 3D circulation model10.1016/j.ocemod.2025.102503 ↗
41. Synthesis and application as programmable water soluble adhesive of polyacrylamide grafted gum tragacanth (GT-G-PAM)
42. Amphiphilic polymer-grafted palygorskite nanorods via surface olefin cross-metathesis for versatile applications10.1016/j.clay.2020.105889 ↗
43. Effect of silicate sodium and graphene nanoplatelets on morphology and rheology characteristics of new synthesized preformed particle gel (PPG) for water shut-off treatment10.1016/j.petrol.2021.108736 ↗
44. Update on Anton Irish conformance effort
45. Assessment of applicability of preformed particle gels for Perm region oil fields10.1088/1755-1315/1021/1/012073 ↗
46. Porosity and permeability analysis from well logs and core in fracture, vugy and intercrystalline carbonate reservoirs10.4172/2155-9546.1000371 ↗
47. Ultra-high temperature resistant preformed particle gels for enhanced oil recovery10.1016/j.cej.2021.130712 ↗
48. Comprehensive review on the research and field application of preformed particle gel conformance control technology10.1016/j.petrol.2021.108440 ↗
49. Water shutoff and conformance improvement: an introduction10.1007/s12182-021-00546-1 ↗
50. Preformed particle gel propagation and dehydration through semi-transparent fractures and their effect on water flow10.1016/j.petrol.2018.04.044 ↗
51. Influence of palygorskite on the structure and thermal stability of collagen10.1016/j.clay.2012.04.017 ↗
52. Gum tragacanth (Gt): a versatile biocompatible material beyond borders
53. A more superior preformed particle gel with potential application for conformance control in mature oilfields10.1007/s13202-014-0136-8 ↗
54. Palygorskite nanomaterials: structure, properties, and functional applications
55. Preparation and properties of degradable hydrogels as a temporary plugging agent used for acidizing treatments to enhance oil recovery10.1016/j.colsurfa.2021.128218 ↗
56. Enhancing thermal stability of preformed particle gels (PPGs) under high temperature: the role of crosslinkers10.1016/j.molliq.2025.127208 ↗
57. Improving temperature and salinity tolerance of polymer gels by modifying with lignin-containing nanocellulose10.1016/j.fuel.2024.134019 ↗
58. Preparation and characterization of preformed polyelectrolyte and polyampholyte gel particles for plugging of high-permeability porous media10.3390/gels10090562 ↗
59. Using screening test results to predict the effective viscosity of swollen superabsorbent polymer particles extrusion through an open fracture10.1021/ie100917m ↗
60. High-strength and self-degradable sodium alginate/polyacrylamide preformed particle gels for conformance control to enhance oil recovery10.1016/j.petsci.2022.06.012 ↗
61. Degradable preformed particle gel as temporary plugging agent for low-temperature unconventional petroleum reservoirs: effect of molecular weight of the cross-linking agent10.1016/j.petsci.2022.07.013 ↗
62. Preparation and properties of an acid-resistant preformed particle gel for conformance control10.1016/j.petrol.2020.107964 ↗
63. Selective penetration and profile control performance of preformed particle gels for heterogeneous oil reservoirs10.3390/gels8100601 ↗
64. Development of re-crosslinkable dispersed particle gels for conformance improvement in extremely high-temperature reservoirs