Effects of different China and ball clays on traditional ceramic process: A multi-methodological approach
Source abstract
Abstract
A combination of technological properties, mineralogical composition and three-dimension (3D) imaging is proposed to get insights into sanitary-ware ceramic bodies of the Vitreous-China technology as a function of the different clay raw materials used in the formulation of slip. Particular attention is paid to the effects induced along the production chain, during casting, after drying (dried body) and after firing (fired body). The different combinations of China and ball clays lead to different casting behaviour, in first instance, and to different mechanical strength, then, due to variations in the particle size distribution rather than in the mineralogical composition. In particular, the finer the particle size, the finer the pore size and, in addition, the better the mechanical properties (with a maximum of 4.7 MPa), due to a better packing. However, fine particle size distribution worsens the slip's behaviour into moulds, impacting negatively on productivity, with a 17 % reduction of casting thickness. Upon firing process, such differences are mitigated by the body densification and result in more similar pores' distributions, though the importance of the mineralogical composition is revealed. In fact, differences in mineralogical phases' contents and in kaolinite HI index guide the comprehension of high temperature phase evolution and technological properties like the fired body thermal expansion, foremost via residual quartz. These results are important for a plastic raw materials's selection within the ceramic sanitary-ware process. • a finer slip particle size affects both mechanical properties and casting behaviour. • XRD-QPA explains the reason of thermal expansion reduction of the fired body. • SR μCT discloses voids' type of connection of ceramic bodies. • guidelines to reduce important causes of scraps and to improve yields are provided.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation · Cultural Heritage Materials Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Yield stress and wall slip of kaolinite network
2. Effect of feldspar particle size on the porous microstructure and stain resistance of polished porcelain tiles10.1016/j.jeurceramsoc.2012.03.019 ↗
3. Mineralogical interference of kaolinite crystallinity index measurements10.1346/CCMN.1999.0470102 ↗
4. Barnes · 1989
5. The role of firing temperature, firing time and quartz grain size on phase-formation, thermal dilatation and water absorption in sanitary-ware vitreous bodies10.1016/j.jeurceramsoc.2011.02.006 ↗
6. Feldspar and firing cycle effects on the evolution of sanitary-ware vitreous body10.1016/j.ceramint.2013.11.139 ↗
7. Fine Fireclay (FC) body technological properties and mineralogy by tuning slip composition and raw materials particle size distribution10.1016/j.ceramint.2023.06.077 ↗
8. Impact of clay mineral particle morphology on the rheological properties of dispersions: a combined X-ray scattering, transmission electronic microscopy and flow rheology study10.1016/j.clay.2013.11.004 ↗
9. Ceramic bodyreformulation procedure with emphasis on ball clays10.1002/9780470314708.ch4 ↗
10. Pore3D: a software library for quantitative analysis of porous media10.1016/j.nima.2010.02.063 ↗
11. The application of clay minerals in ceramics10.1016/0169-1317(91)90016-3 ↗
12. Calibrating of excess thermodynamic properties and elastic constant variations associated with the α <−> β phase transition in quartz10.2138/am-1998-1-201 ↗
13. Porcelain—raw materials, processing, phase evolution, and mechanical behavior10.1111/j.1151-2916.1998.tb02290.x ↗
14. Bone diagenesis in archaeological and contemporary human remains: an investigation of bone 3D microstructure and minero-chemical assessment10.1007/s12520-020-01090-6 ↗
15. Relationship between the thermal behaviour of the clays and their mineralogical and chemical composition: example of Ipoh, Kuala Rompin and Mersing (Malaysia)10.1016/j.clay.2017.03.037 ↗
16. Addressing the amorphous content issue in quantitative phase analysis: the certification of NIST standard reference material 676a10.1107/S0108767311014565 ↗
17. Effects of pore size on the flexural strength of porous silicon carbide ceramics
18. Analysis of the development of microscopic residual stresses on quartz particles in porcelain tile10.1016/j.jeurceramsoc.2008.04.009 ↗
19. The effect of kaolin properties on the behaviour in ceramic processing by a range of kaolins from the Santa Cruz and Chubut Provinces, Patagonia (Argentina)10.1016/j.clay.2007.07.003 ↗
20. Clays and bodies for ceramic tiles: reappraisal and technological classification10.1016/j.clay.2014.01.013 ↗
21. Fortuna · 2011
22. Composition and ceramic properties of ball clays for porcelain stoneware tiles manufacture in Poland10.1016/j.clay.2010.11.004 ↗
23. Hsiung · 2013 · 33 · 503
24. The quartz α-β phase transition: does it drive damage and reaction in continental crust?10.1016/j.epsl.2020.116622 ↗
25. Properties of kaolinite as a raw material for porcelain10.4191/kcers.2019.56.6.05 ↗
26. A compact and flexible induction furnace for in situ X-ray microradiography and computed microtomography at Elettra: design, characterization and first tests10.1107/S1600577518005970 ↗
27. Investigation of the sintering mechanism of kaolin-muscovite10.1016/j.clay.2011.01.007 ↗
28. Effect of kaolinite, illite and talc on the processing properties and mullite content of porcelain stoneware tiles10.1016/j.msea.2014.09.049 ↗
29. Industrial clays: Kaolin (China clay), ball clay and bentonite
30. Influence of aggregate mineralogy on alkali-silica reaction studied by X-ray powder diffraction and imaging technique10.1007/s10853-011-6114-3 ↗
31. Effect of firing temperature on sintering of porcelain stoneware tiles10.1016/j.ceramint.2007.06.006 ↗
32. Thermal behavior of mullite between 4 K and 1320 K10.1111/jace.15028 ↗
33. The influence of phyllosilicate mineralogy on the rheology of mineral slurries10.1016/j.mineng.2011.05.008 ↗
34. Influence of the thermal expansion mismatch between body and glaze on the crack density of glazed ceramics, ceramics
35. Consolidation of building materials with a phosphate-based treatment: effects on the microstructure and on the 3D pore network10.1016/j.matchar.2019.05.037 ↗
36. Comparison of stress concentration versus minimum solid area based mechanical property-porosity relations10.1007/BF00367582 ↗
37. Recommendations for the characterization of porous solids (Technical Report)10.1351/pac199466081739 ↗
38. Formation of high-temperature crystalline phases in ceramic from illite clay and dolomite10.1016/j.jeurceramsoc.2005.10.012 ↗
39. Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Recommendations 1984)10.1351/pac198557040603 ↗
40. Analysis of variance (ANOVA)10.1016/0169-7439(89)80095-4 ↗
41. Microstructural evolution in clay-based ceramics II: ternary and quaternary mixtures of clay. Flux, and quartz filler10.1111/j.1551-2916.2008.02394.x ↗
42. GSAS-II: the genesis of a modern open-source all purpose crystallography software package10.1107/S0021889813003531 ↗
43. The SYRMEP beamline of elettra: clinical mammography and bio-medical applications10.1063/1.3478190 ↗
44. Visualization and prediction of supercritical CO2 distribution in sandstones during drainage: an in situ synchrotron X-ray micro-computed tomography study10.1016/j.ijggc.2017.10.002 ↗
45. The constitution, evaluation and ceramic properties of ball clays
46. Phase-pure mullite from kaolinite10.1111/j.1151-2916.2002.tb00289.x ↗
47. Quantitative analysis of X-ray microtomography images of geomaterials: application to volcanic rocks10.1130/GES00561.1 ↗
48. Understanding pore formation and the effect on mechanical properties of high speed sintered polyamide-12 parts: a focus on energy input10.1016/j.matdes.2020.108937 ↗