journal article·2024-12

Green fabrication of poly (butylene succinate)/halloysite nanotube open-cell foams with ultra-high foaming and adsorption performance

Xin He, Meng Zhang, Min Zhu, Hongfu Zhou, Xiangdong Wang, Ning Chen

Publisher page

Abstract

Ecological balance and human health have been greatly impacted by the environmental effects of oil spill pollution. In order to prepare an environmentally friendly, efficient, potential promising adsorbent for coping with the oil spill pollution, herein, biodegradable poly (butylene succinate) (PBS) open-cell foams were prepared by supercritical CO 2 foaming in the presence of a chain extender and tubular halloysite nanotube (Hal). The unique open-cell structure of PBS foams and the special functional groups on the surface of Hal enabled branched PBS (BPBS)/Hal open-cell foam to efficiently remove oil contaminants and keep excellent mechanical properties. The torque curve and Fourier transformation infrared spectra results showed that the chain extension modification of PBS was successful after adding CE. Meanwhile, the rheological properties and crystallization behaviors of all PBS samples were analyzed by rheometer, differential scanning calorimetry, polarized optical microscopy. It was found that the storage modulus and crystallinity of PBS samples were improved with the increase of Hal content. The obtained BPBS with 0.75 phr of Hal (BPBS/Hal3) open-cell foam exhibited the highest volume expansion ratio (64 times) and adsorption capacities up to 47 g/g carbon tetrachloride (CCl 4) among all the prepared foams. Furthermore, Hal addition enhanced the mechanical properties of BPBS/Hal open-cell foams, resulting in a specific compressive strength increase of 608.4 %. Moreover, BPBS/Hal3 open-cell foam continued to achieve an adsorption capacity of 46 g/g CCl 4 (97.8 % of the initial value) after 10 adsorption cycles. This study not only presents a green and straightforward approach for preparing high-porosity biodegradable polymer open-cell foams but also offers a potentially promising solution for maintaining a green and low-carbon ecological environment without oil spill pollution.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Pickering emulsions and particle stabilization · Clay minerals and soil interactions · Therapeutic Uses of Natural Elements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (75)

Show source-provided references
1. Reactive extrusion of PLA, PBAT with a multi-functional epoxide: physico-chemical and rheological properties10.1016/j.eurpolymj.2014.06.013 ↗
2. Electromagnetic shielding performance of acrylonitrile-butadiene-styrene/CNTs composite foams with different cell structures10.1016/j.supflu.2022.105608 ↗
3. MIL-100(Fe)-derived carbon sponge as high-performance material for oil/water separation10.1016/j.seppur.2020.117951 ↗
4. Oil spill cleanup from sea water by sorbent materials10.1002/ceat.200407083 ↗
5. Environmental effects of the Deepwater horizon oil spill: a review10.1016/j.marpolbul.2016.06.027 ↗
6. A comparative study of the removal of trivalent chromium from aqueous solutions by bentonite and expanded perlite10.1016/S0304-3894(01)00382-X ↗
7. Engineering of polybutylene succinate with long-chain branching toward high foamability and degradation10.1016/j.polymdegradstab.2021.109745 ↗
8. Microstructure-rheological percolation-mechanical properties correlation of melt-processed polypropylene-multiwall carbon nanotube nanocomposites: influence of matrix tacticity combination10.1016/j.matchemphys.2014.04.019 ↗
9. Comparison of natural halloysite with synthetic carbon nanotubes in poly(lactic acid) based composites10.1002/pc.23816 ↗
10. Preparation of open-cell foams from polymer blends by supercritical CO2 and their efficient oil-absorbing performance10.1002/aic.15492 ↗
11. Characterizations of the formation of polydopamine-coated halloysite nanotubes in various pH environments10.1021/acs.langmuir.6b02948 ↗
12. Halloysite nanotubes in analytical sciences and in drug delivery: a review
13. PLA scaffolds production from thermally induced phase separation: effect of process parameters and development of an environmentally improved route assisted by supercritical carbon dioxide10.1016/j.supflu.2018.02.015 ↗
14. An environmentally friendly method for the fabrication of reduced graphene oxide foam with a super oil absorption capacity10.1016/j.jhazmat.2013.06.042 ↗
15. High-expansion polypropylene foam prepared in non-crystalline state and oil adsorption performance of open-cell foam10.1016/j.jcis.2019.02.028 ↗
16. Elaboration of novel polyaniline@Almond shell biocomposite for effective removal of hexavalent chromium ions and orange G dye from aqueous solutions10.1007/s11356-020-08039-1 ↗
17. Synthesis of an arginine-functionalized polyaniline@FeOOH composite with high removal performance of hexavalent chromium ions from water: adsorption behavior, regeneration and process capability studies
18. Facile synthesis and characterization of a novel 1,2,4,5-benzene tetracarboxylic acid doped polyaniline@zinc phosphate nanocomposite for highly efficient removal of hazardous hexavalent chromium ions from water10.1016/j.jcis.2020.10.036 ↗
19. Polyaniline coated tungsten trioxide as an effective adsorbent for the removal of orange G dye from aqueous media10.1039/D1RA04135E ↗
20. 1,2,4,5-benzene tetracarboxylic acid-doped polyaniline/protonated carbon nitride nanostructures for Cr(VI) adsorption in water10.1021/acsanm.4c01503 ↗
21. The essential role of PBS on PBAT foaming under supercritical CO2 toward green engineering10.1016/j.jcou.2022.101965 ↗
22. Fabrication of bimodal open-porous poly (butylene succinate)/cellulose nanocrystals composite scaffolds for tissue engineering application10.1016/j.ijbiomac.2019.10.085 ↗
23. Does halloysite behave like an inert carrier for doxorubicin?10.1039/C6RA09198A ↗
24. Three dimensional MOF-sponge for fast dynamic adsorption10.1039/C6CP06617H ↗
25. Fabrication of biodegradable poly (lactic acid)/carbon nanotube nanocomposite foams: significant improvement on rheological property and foamability10.1016/j.ijbiomac.2020.07.094 ↗
26. Biodegradable PLA/PBS open-cell foam fabricated by supercritical CO2 foaming for selective oil-adsorption10.1016/j.seppur.2020.117949 ↗
27. Enhancement of cardanol-loaded halloysite for the thermo-oxidative stability and crystallization property of polylactic acid10.1016/j.clay.2021.106357 ↗
28. Preparation of open-cell long-chain branched polypropylene foams for oil absorption10.1021/acsomega.3c07915 ↗
29. High-expansion open-cell polylactide foams prepared by microcellular foaming based on stereocomplexation mechanism with outstanding oil-water separation10.3390/polym15091984 ↗
30. Metalized plastic current collectors incorporated with halloysite nanotubes toward highly safe lithium-ion batteries10.1002/adfm.202316582 ↗
31. Application of nanomaterial for enhanced oil recovery10.1016/j.petsci.2021.11.011 ↗
32. Coating of silk sutures by halloysite/wax pickering emulsions for controlled delivery of eosin
33. Shear thickening gel reinforced flexible polyurethane foam and its enhanced properties
34. Biomimetic hydrophobic plastic foams with aligned channels for rapid oil absorption10.1016/j.jhazmat.2022.129346 ↗
35. Iron(II) modified natural zeolites for hexavalent chromium removal from contaminated water10.1515/aep-2016-0004 ↗
36. Low-density open-cell flexible polyolefin foams as efficient materials for oil absorption: influence of tortuosity on oil absorption10.1007/s13762-019-02576-0 ↗
37. Superoleophilic and flexible thermoplastic polymer nanofiber aerogels for removal of oils and organic solvents10.1021/acsami.7b07004 ↗
38. Research progress of modified natural zeolites for removal of typical anions in water
39. Introduction/overview to in situ burning of oil spills10.1016/S1353-2561(03)00076-8 ↗
40. Polymerization regenerating ca-zeolite by calcium inducing halloysite for enhancing toxic metal ions removal
41. Design and research of offshore oil spill removal ship with variable angle of attack
42. Effect of halloysite nanotube on microstructure, rheological and mechanical properties of dynamically vulcanized PA6/NBR thermoplastic vulcanizates10.1080/1539445X.2016.1157694 ↗
43. Adopting a toxic unit model paradigm in design, analysis and interpretation of oil toxicity testing
44. Sepiolite-hydrogels: synthesis by ultrasound irradiation and their use for the preparation of functional clay-based nanoarchitectured materials10.3389/fchem.2021.733105 ↗
45. Lignin derived nano-biocarbon and its deposition on polyurethane foam for wastewater dye adsorption10.1016/j.ijbiomac.2021.06.185 ↗
46. Microbial degradation of aliphatic and aliphatic-aromatic co-polyesters10.1007/s00253-014-5558-1 ↗
47. Recent advances in cellulose-based sustainable materials for wastewater treatment: an overview10.1016/j.ijbiomac.2023.128517 ↗
48. Ultralight and hydrophobic PVDF/PMMA open-cell foams with outstanding heat-insulation and oil-adsorption performances fabricated by CO2 molten foaming10.1016/j.jcou.2022.102108 ↗
49. Role of chain extension in the rheological properties, crystallization behaviors, and microcellular foaming performances of poly (butylene adipate-co-terephthalate)10.1002/app.47322 ↗
50. Superhydrophobic UHMWPE foams with high mechanical robustness and durability fabricated by supercritical CO2 foaming10.1021/acssuschemeng.1c04573 ↗
51. Adsorption of thorium from aqueous solutions by perlite10.1016/j.jenvrad.2008.09.004 ↗
52. Time-temperature superposition for polymeric blends
53. In situ compatibilization of polylactide/thermoplastic polyester elastomer blends using a multifunctional epoxide compound as a processing agent10.1002/app.43424 ↗
54. Superhydrophobic and superoleophilic porous reduced graphene oxide/polycarbonate monoliths for high-efficiency oil/water separation10.1016/j.jhazmat.2017.11.040 ↗
55. Morphological evolution from open cells to reticulated structures in moderately branched polybutylene terephthalate foamed using supercritical CO210.1002/adem.202101102 ↗
56. Oil-water separation polypropylene foam with advanced solvent-evaporation induced coexistence of microspheres and microporous structure10.1002/marc.202200177 ↗
57. High-expansion-ratio PLLA/PDLA/HNT composite foams with good thermally insulating property and enhanced compression performance via supercritical CO210.1016/j.ijbiomac.2023.123961 ↗
58. Hydrophobic and oleophilic open-cell foams from in-situ microfibrillation blends of poly(lactic acid) and polytetrafluoroethylene: selective oil-adsorption behaviors10.1016/j.ijbiomac.2022.12.196 ↗
59. Carbon nanofiber aerogels for emergent cleanup of oil spillage and chemical leakage under harsh conditions10.1038/srep04079 ↗
60. Preparation of biodegradable poly(butylene succinate)/halloysite nanotube nanocomposite foams using supercritical CO2 as blowing agent10.1007/s10965-015-0811-6 ↗
61. Poly(butylene succinate) and its copolymers: research, development and industrialization10.1002/biot.201000136 ↗
62. Biodegradable nanofibrillated microcellular PBS/PLA foams for selective oil absorption10.1016/j.ijbiomac.2023.127844 ↗
63. Highly stabilized foam by adding amphiphilic janus particles for drilling a high-temperature and high-calcium geothermal well10.1021/acs.iecr.9b01714 ↗
64. A scalable versatile methodology to construct micro/nano open-cell polypropylene foam with high oil adsorption capacity and speed10.1007/s12274-023-6165-1 ↗
65. Functionalized halloysite scaffold controls sodium dendrite growth10.1021/acsami.3c00261 ↗
66. Sustained antioxidant properties of epigallocatechin gallate loaded halloysite for PLA as potentially durable materials10.1002/app.53411 ↗
67. Microcellular foaming behaviors of chain extended poly (butylene succinate)/polyhedral oligomeric silsesquioxane composite induced by isothermal crystallization10.1016/j.polymdegradstab.2019.07.010 ↗
68. Fabrication of branching poly (butylene succinate)/cellulose nanocrystal foams with exceptional thermal insulation10.1016/j.carbpol.2020.116708 ↗
69. Melting behavior of poly(butylene succinate) during heating scan by DSC10.1002/(SICI)1099-0488(19990701)37:13<1357::AID-POLB2>3.0.CO;2-Q ↗
70. Novel polyvinylidene fluoride nanofiltration membrane blended with functionalized halloysite nanotubes for dye and heavy metal ions removal10.1016/j.jhazmat.2016.05.049 ↗
71. Highly biocompatible, underwater superhydrophilic and multifunctional biopolymer membrane for efficient oil–water separation and aqueous pollutant removal10.1021/acssuschemeng.7b04219 ↗
72. Porous polyethylene bundles with enhanced hydrophobicity and pumping oil-Recovery ability via skin-peeling10.1021/acssuschemeng.8b03305 ↗
73. Role of high-density polyethylene in the crystallization behaviors, rheological property, and supercritical CO2 foaming of poly (lactic acid)10.1016/j.polymdegradstab.2017.11.003 ↗
74. Review on poly (butylene succinate) foams: modifications, foaming behaviors and applications
75. Adsorption characteristics of amphiphilic open-cell poly(butylene succinate) foams with ultrahigh porosity10.1016/j.supflu.2023.106002 ↗