Effects of modified palygorskite on performance, crystallization and rheology of polyphenylene sulfide
Source abstract
Abstract
In this work, Pal-Fe 3O 4 was prepared by magnetic modification of purified palygorskite (Pal), and then STAC@Pal-Fe 3O 4 was prepared by organic modification of Pal-Fe 3O 4 with Stearyl trimethyl ammonium chloride (STAC). The preparation conditions of STAC@Pal-Fe 3O 4 were optimized by orthogonal experiment. Some characterization results such as X-ray diffraction and Fourier transform infrared spectroscopy (FTIR) showed that palygorskite had been successfully modified. In addition, STAC@Pal-Fe 3O 4/polyphenylene sulfide (PPS) nanocomposites were prepared by melt blending method. The mechanical properties, rheological properties and crystallization properties of STAC@Pal-Fe 3O 4/PPS nanocomposites were studied. When the mass fraction of STAC@Pal-Fe 3O 4 in PPS was 2.5 wt%, the tensile strength and impact strength of STAC@Pal-Fe 3O 4/PPS nanocomposites were 65.06% and 366% higher than those of pure PPS, respectively. Thermogravimetric analysis showed that STAC@Pal-Fe 3O 4 improved the thermal stability of PPS. The non-isothermal crystallization behavior of STAC@Pal-Fe 3O 4/PPS nanocomposites was studied by DSC method and Rheonaut technology for simultaneous rheology and FTIR, respectively. The results showed that STAC@Pal-Fe 3O 4 can significantly improve the crystallization rate and crystallinity of PPS. Rheological studies presented that STAC@Pal-Fe 3O 4 had strong compatibility with PPS.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · biodegradable polymer synthesis and properties · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. A review of clay-supported ziegler–natta catalysts for production of polyolefin/clay nanocomposites through in situ polymerization10.1016/j.apcata.2014.01.028 ↗
2. Sepiolite nanoplatform for the simultaneous assembly of magnetite and zinc oxide nanoparticles as photocatalyst for improving removal of organic pollutants10.1016/j.jhazmat.2017.06.067 ↗
3. The crystallinity of poly (phenylene sulfide) and its effect on polymer properties10.1002/app.1976.070200921 ↗
4. Assembled Fe3O4 nanoparticles on Zn Al LDH nanosheets as a biocompatible drug delivery vehicle for pH-responsive drug release and enhanced anticancer activity10.1016/j.clay.2022.106630 ↗
5. Performance, interfacial compatibility testing and rheonaut technology analysis for simultaneous rheology and FTIR of poly (lactic acid)/modified saponite nanocomposites10.1016/j.polymertesting.2021.107232 ↗
6. Mechanical and thermal properties of attapulgite clay reinforced polymethylmethacrylate nanocomposites10.1002/pat.1691 ↗
7. Effect of functionalized organic saponite on performance, crystallization and rheology of poly (lactic acid)10.1016/j.clay.2021.106091 ↗
8. Progress in research and applications of polyphenylene sulfide blends and composites with carbons10.1016/j.compositesb.2020.108553 ↗
9. A brief review of the latest advances of attapulgite as a reinforcing agent in polymer matrix nanocomposites10.3844/ajeassp.2021.292.307 ↗
10. Influence of surface modification of attapulgite (ATP) with aminosilane (3-aminopropyl) triethoxysilane for the preparation of LLDPE/ATP nanocomposites10.1007/s10965-022-02953-3 ↗
11. Kaolinite-based janus nanoparticles as a compatibilizing agent in polymer blends10.1016/j.clay.2019.105291 ↗
12. Dasan · 2015 · 561
13. Nanodiamond as an efficient nucleating agent for polyphenylene sulfide10.1016/j.tca.2014.03.017 ↗
14. Rheological and tribological properties of carbon nanotube/thermoplastic nanocomposites incorporating inorganic fullerene-like WS2 nanoparticles10.1021/jp3035314 ↗
15. Fabrication of attapulgite/magnetic aminated chitosan composite as efficient and reusable adsorbent for Cr (VI) ions10.1038/s41598-021-96145-6 ↗
16. Mechanical properties of polyphenylene-sulfide (PPS) bonded Nd–Fe–B permanent magnets10.1016/S0921-5093(03)00400-3 ↗
17. Applications of halloysite in tissue engineering10.1016/j.clay.2021.106291 ↗
18. Relationship between the rheology and morphology of dynamically vulcanized thermoplastic elastomers based on EPDM/PP10.1002/pen.20232 ↗
19. Static and dynamic magnetic properties of spherical magnetite nanoparticles10.1063/1.1599959 ↗
20. Polyphenylene sulfide hydrophobic composite coating with high stability, corrosion resistance and antifouling performance10.1016/j.surfin.2021.101577 ↗
21. A novel composite protective coating with UV and corrosion resistance: load floating and self-cleaning performance10.1016/j.ceramint.2022.02.293 ↗
22. Magnetic activated-ATP@Fe3O4 nanocomposite as an efficient fenton-like heterogeneous catalyst for degradation of ethidium bromide10.1038/s41598-017-06398-3 ↗
23. Preparation of nano-SiO2 compound antioxidant and its antioxidant effect on polyphenylene sulfide10.1515/polyeng-2019-0072 ↗
24. Magnetic field synthesis of Fe3O4 nanoparticles used as a precursor of ferrofluids10.1016/j.jmmm.2006.07.026 ↗
25. Synthesis and magnetic interaction on concentrated Fe3O4 nanoparticles obtained by the co-precipitation and hydrothermal chemical methods10.1016/j.ceramint.2020.01.135 ↗
26. A review on functional polymer-clay based nanocomposite membranes for treatment of water
27. Rheological mechanism and overview of nucleated crystallization kinetics10.1021/ma00066a024 ↗
28. Preparation and characterization of biodegradable polyurethane composites containing attapulgite nanorods10.1002/adv.21658 ↗
29. Phase behavior and its viscoelastic responses of poly (methyl methacrylate) and poly (styrene-co-maleic anhydride) blend systems10.1007/s00289-005-0499-6 ↗
30. A thermal resistant and flame retardant separator reinforced by attapulgite for lithium-ion batteries via multilayer coextrusion10.1016/j.polymer.2022.125027 ↗
31. Effect of Ti–SiO2 nanoparticles on non-isothermal crystallization of polyphenylene sulfide fibers10.1007/s10973-017-6196-5 ↗
32. Analysis on interfacial stress in impact of polyphenylene sulfide/CaCO3 composites10.1002/pat.2033 ↗
33. Attapulgite–Fe3O4 magnetic nanoparticles via co-precipitation technique10.1016/j.apsusc.2008.06.193 ↗
34. Characterization and catalytic performance of Fe3Ni8/palygorskite for catalytic cracking of benzene10.1016/j.clay.2012.04.005 ↗
35. Influence of crystallinity on interlaminar fracture toughness and impact properties of polyphenylene sulfide/carbon fiber laminates10.1016/j.engfailanal.2020.104976 ↗
36. Slippery liquid-infused porous surface (SLIPS) with superior liquid repellency, anti-corrosion, anti-icing and intensified durability for protecting substrates10.1016/j.cej.2020.126137 ↗
37. A comparative study of different natural palygorskite clays for fabricating cost-efficient and eco-friendly iron red composite pigments10.1016/j.clay.2018.10.008 ↗
38. Performance and multi-scale investigation on the phase miscibility of poly (lactic acid)/amided silica nanocomposites10.1016/j.ijbiomac.2021.02.117 ↗
39. Fabrication of durable fluorine-free polyphenylene sulfide/silicone resin composite superhydrophobic coating enhanced by carbon nanotubes/graphene fillers10.1016/j.porgcoat.2019.04.042 ↗
40. Barrier properties of nanocomposites from high-density polyethylene reinforced with natural attapulgite10.1016/j.crgsc.2022.100314 ↗
41. Synthesis, characterization and optimization of poly(p-phenylenediamine)-based organoclay composite for Cr (VI) remediation10.1016/j.clay.2017.01.015 ↗
42. Amphiphilic polymer-grafted palygorskite nanorods via surface olefin cross-metathesis for versatile applications10.1016/j.clay.2020.105889 ↗
43. Study on the nonisothermal crystallization behavior of poly (vinyl alcohol)/attapulgite nanocomposites by DSC analysis10.1002/polb.20719 ↗
44. Insight into catalyst of tetramethylguanidine decorated palygorskite for CO2 conversion assisted with zinc halides10.1016/j.clay.2022.106626 ↗
45. Dynamic infrared study of polyphenylene sulfide using planar array infrared spectroscopy10.1366/000370208786049060 ↗
46. Strain effects on physical gelation of crystallizing isotactic polypropylene10.1002/(SICI)1099-0488(19991215)37:24<3512::AID-POLB12>3.0.CO;2-# ↗
47. Intercalated poly (vinylidene fluoride)/clay nanocomposites: structure and properties10.1002/polb.10355 ↗
48. Electrical and rheological percolation behavior of multiwalled carbon nanotube-reinforced poly (phenylene sulfide) composites10.1177/0021998316644848 ↗
49. A simple mixing method for polyamide 12/attapulgite nanocomposites: structural and mechanical characterization10.1007/s42452-020-2153-1 ↗
50. Efficient adsorption of Cu (II), Pb (II) and Ni (II) from waste water by PANI@APTS-magnetic attapulgite composites10.1016/j.clay.2021.106151 ↗
51. A study on the crystallization behaviour of polypropylene, polyethylene and their blends by dynamic mechanical and thermal methods10.1016/0032-3861(94)90842-7 ↗
52. Mechanical properties of natural rubber nanocomposites filled with thermally treated attapulgite10.1155/2013/496584 ↗
53. Preparation, crystallization behavior, simultaneous spectroscopic and rheological characterization of polyphenylene sulfide/graphene quantum dots nanocomposites10.1002/macp.202200149 ↗
54. XPS analysis of oleylamine/oleic acid capped Fe3O4 nanoparticles as a function of temperature10.1016/j.apsusc.2014.02.006 ↗
55. Poly (phenylene sulfide) magnetic composites. II. Crystallization, thermal, and viscoelastic properties10.1002/pen.21003 ↗
56. Effect of benzimidazolium salt on dispersion and properties of polyphenylene sulfide/organic clay nanocomposites via melt intercalation10.1007/s12221-015-1220-5 ↗
57. Modification of montmorillonite by different surfactants and its use for the preparation of polyphenylene sulfide nanocomposites10.1177/0954008315591194 ↗
58. Nonisothermal crystallization kinetics, morphology, and tensile properties of polyphenylene sulfide/functionalized graphite nanoplatelets composites10.1177/0954008318764584 ↗
59. Preparation and characterization of polyphenylene sulfide/graphene nanoplatelets composite fibers with enhanced oxidation resistance10.1177/0954008319867748 ↗
60. Novel and recyclable demulsifier of expanded perlite grafted by magnetic nanoparticles for oil separation from emulsified oil wastewaters10.1016/j.cej.2017.12.084 ↗
61. Polyaniline/attapulgite-supported nanoscale zero-valent iron for the rival removal of azo dyes in aqueous solution10.1177/0263617418822917 ↗
62. Time-resolved FTIR study of crystallization behavior of melt-crystallized poly (phenylene sulfide)10.1081/MB-100100385 ↗
63. Thickness, modulus and strength of interphase in clay/polymer nanocomposites10.1016/j.clay.2014.12.016 ↗
64. Structural changes and crystallization dynamics of poly(l-lactide) during the cold-crystallization process investigated by infrared and two-dimensional infrared correlation spectroscopy10.1021/ma049288t ↗
65. Nonisothermal crystallization kinetics of poly (lactic acid)/nanosilica composites10.1080/00222348.2012.701551 ↗
66. Fabrication and characterization of polyphenylene sulfide composites with ultra-high content of carbon fiber fabrics10.1007/s42114-019-00111-w ↗
67. Facile approach to magnetic attapulgite-Fe3O4/polystyrene tri-component nanocomposite10.1016/j.matlet.2012.06.076 ↗
68. Preparation of PLA-based nanocomposites modified by nano-attapulgite with good toughness-strength balance10.1016/j.polymertesting.2017.03.007 ↗
69. Excellent flame retardant and thermal insulated palygorskite/wood fiber composite aerogels with improved mechanical properties10.1016/j.clay.2019.105402 ↗
70. Heteroepitaxial growth of gold on flowerlike magnetite: an efficacious and magnetically recyclable catalyst for chemoselective hydrogenation of crotonaldehyde to crotyl alcohol10.1016/j.jcat.2011.04.007 ↗
71. Effects of length and organic modification of attapulgite nanorods on attapulgite/polystyrene nanocomposite via in-situ radical bulk polymerization10.1016/j.clay.2015.06.029 ↗
72. Thermal insulation and flame retardancy of attapulgite reinforced gelatin-based composite aerogel with enhanced strength properties10.1016/j.compositesa.2020.106040 ↗
73. Infrared spectroscopic analysis of poly (p-phenylene sulfide)10.1016/0584-8539(95)01408-X ↗