Preparation of zinc oxide/halloysite compound and their reinforcement for styrene butadiene rubber composite
Source abstract
Abstract
This study investigated the surface treatment of halloysite nanotubes (HNTs) with zinc oxide (ZnO) and used to enhance the mechanical properties of butyl rubber (SBR) composites. The prepared ZnO-modified HNTs (ZnO/HNTs) was characterized by X-ray diffraction (XRD), Fourier infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM) and Transmission electron microscopy (TEM). The results indicated that ZnO particles were successfully loaded on the surface of HNTs and interacted with hydroxyl groups. The outer surface of HNTs became rough due to the loading of ZnO. The effects of ZnO/HNTs on the processing and mechanical properties of filled SBR composites were evaluated. The results showed that the ZnO/HNTs particles displayed a fine dispersion in the matrix system and have a strong interaction compatibility with rubber matrix chains. The tensile strength reached at the maximum of 9.35 MPa at a filler content of 60 phr, which was 405% and 31.69% higher than those of pure SBR and the HNTs/SBR composites, respectively. The enhancement of the mechanical properties of filled SBR composites is attributed to the fine dispersion of the ZnO/HNTs particles in the SBR matrix and the improved incorporation between the rubber molecules and the filler particles due to the loading of ZnO on the surface of HNTs, which restricts the movement of the rubber chains by entrapping molecules when the composites is subjected to stress loading.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Clay minerals and soil interactions · Polymer Nanocomposites and Properties · Layered Double Hydroxides Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Effect of reinforcing ability of halloysite nanotubes in styrene-butadiene rubber nanocomposites10.1016/j.coco.2020.100440 ↗
2. Properties of self-assembled ZnO nanostructures10.1016/S0038-1101(02)00118-1 ↗
3. Temperature-Controlled Synthesis and Photocatalytic Performance of ZnO Nanoplatelets10.1002/cvde.200706594 ↗
4. Halloysite nanotubes in polymer science: purification, characterization, modification and applications10.1515/ntrev-2020-0024 ↗
5. Carboxylated butadiene–styrene rubber/halloysite nanotube nanocomposites: Interfacial interaction and performance10.1016/j.polymer.2008.08.042 ↗
6. Newly emerging applications of halloysite nanotubes: a review
7. Comparison of natural halloysite with synthetic carbon nanotubes in poly (lactic acid) based composites10.1002/pc.23816 ↗
8. Surface precipitation of highly porous hydrotalcite-like film on Al from a zinc aqueous solution10.1021/la052424i ↗
9. Structural, electronic, andmechanical properties of single-walled halloysite nanotube models10.1021/jp100902e ↗
10. Styrene-butadiene rubber/halloysite nanotubes nanocomposites modified by sorbic acid10.1016/j.apsusc.2009.03.092 ↗
11. Influence of zinc oxide during different stages of sulfur vulcanization. Elucidated by model compound studies10.1002/app.21364 ↗
12. Various ways to reduce zinc oxide levels in S-SBR rubber compounds10.1002/masy.200651393 ↗
13. Morphological, thermal and tensile properties of halloysite nanotubes filled ethylene propylene diene monomer (EPDM) nanocomposites10.1016/j.polymertesting.2008.06.007 ↗
14. Properties of halloysite nanotubes-filled natural rubber prepared using different mixing methods10.1016/j.matdes.2013.03.038 ↗
15. Design of halloysite modification for improvement of mechanical properties of the epoxy based nanocomposites10.1002/pc.25967 ↗
16. Reinforcing and flame-retardant effects of halloysite nanotubes on LLDPE10.1080/03602550902824440 ↗
17. Interfacial mechano-chemical grafting in styrene-butadiene rubber/halloysite nanotubes composites10.1016/j.polymertesting.2016.06.022 ↗
18. Halloysite clay minerals: a review10.1180/0009855054040180 ↗
19. Chitosan functionalized super magnetic halloysite nanotubes for covalent laccase immobilization10.1016/j.carbpol.2018.04.046 ↗
20. Review on polymer/halloysite nanotube nanocomposite10.1080/03602559.2017.1329436 ↗
21. Thermal behavior analysis of halloysite–dimethylsulfoxide intercalation complex10.1007/s10973-017-6258-8 ↗
22. Functionalized halloysite nanotubes–silica hybrid for enhanced curing and mechanical properties of elastomers10.3390/polym11050883 ↗
23. Natural inorganic nanotubes reinforced epoxy resin nanocomposites10.1007/s10965-007-9160-4 ↗
24. Nanocomposites of halloysite and polylactide10.1016/j.clay.2013.02.019 ↗
25. Recent advance in research on halloysite nanotubes-polymer nanocomposite10.1016/j.progpolymsci.2014.04.004 ↗
26. Halloysite-based polymer nanocomposites10.1016/B978-0-12-814533-3.00012-0 ↗
27. Efficient photocatalytic hydrogen evolution over hydrogenated ZnO nanorod arrays10.1039/C2CC31773G ↗
28. A study on the effect of nano-ZnO on rheological and dynamic mechanical properties of polypropylene: experiments and models10.1016/j.compositesb.2011.04.043 ↗
29. Preparation of polyurethane composites reinforced with halloysite and carbon nanotubes10.1002/pc.25838 ↗
30. Efficient preparation of coal-series kaolinite intercalation compounds via a catalytic method and their reinforcement for styrene butadiene rubber composite10.1016/j.clay.2021.106237 ↗
31. Effect of thickness on the structural and optical properties of sputtered ZnO and ZnO: Mn thin films10.1016/j.jallcom.2014.06.166 ↗
32. Preparation and properties of natural nanocomposites based on natural rubber and naturally occurring halloysite nanotubes10.1016/j.matdes.2009.11.009 ↗
33. Up-to-date review on the development of high performance rubber composites based on halloysite nanotube10.1016/j.clay.2019.105300 ↗
34. ZnO nanoparticles anchored to silica filler. A curing accelerator for isoprene rubber composites10.1016/j.cej.2015.04.017 ↗
35. Synergistic effect of hybrid graphene nanoplatelet and multi-walled carbon nanotube fillers on the thermal conductivity of polymer composites and theoretical modeling of the synergistic effect10.1016/j.compositesa.2016.05.022 ↗
36. Simulation of tensile strength for halloysite nanotubes/polymer composites10.1016/j.clay.2021.106055 ↗
37. Mechanism responsible for Intercalation of Dimethyl Sulfoxide in Kaoinite: Molecular Dynamics Simulations10.1016/j.clay.2017.10.022 ↗
38. Characterization of kaolinite/styrene butadiene rubber composite: Mechanical properties and thermal stability10.1016/j.clay.2016.02.002 ↗
39. Applications and interfaces of halloysite nanocomposites10.1016/j.clay.2015.06.034 ↗