Thermal, chemical and mechanical characterization of recycled corundum powder in metakaolin-based geopolymer binder
Source abstract
Abstract
In this study we report on the addition of a waste, a real spent corundum abrasive powder collected after testing, to a metakaolin-based alkali activated binder. The waste has been chosen as representative of spent grits produced by industrial blasting processes. In this model system based on metakaolin, the effect of corundum powder in the environment of high alkaline media was investigated in terms of 3D reticulation of the aluminosilicate amorphous structure of the consolidated geopolymeric mixes. A number of microstructural techniques (FT-IR, XRD, TGA/DTA) have been used in combination with less conventional one, such as the ionic conductivity measurements of the eluate produced after 24 h of immersion of the sample in water. The overall 3D aluminosilicate frame typical of MK-based geopolymer is retained also after 50 wt% addition of recycled corundum, as shown by FT-IR, XRD, and TGA/DTA. The traces of ceramic materials abrasion present in the waste showed good reactivity, as shown by the disappearance of their characteristic peaks in the XRD patterns. Ionic conductivity of the eluates evidenced the most extended reactivity of the alkaline activator solution in the case of 10 and 20 wt% addition of the waste. While the role of 20, 30 and 40 wt% addition of the waste to the MK-based matrix produced the highest compressive strength in the consolidated mortars after 28 days comparable to those of Ordinary Portland cement concretes. It was proved that, when produced using a partially reactive waste with well-formulated mix designs, metakaolin alkali-activated binders or mortars are an important aluminosilicate source for room temperature produced construction materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Advanced ceramic materials synthesis · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. ACI M318–-05 2005 · 2005
2. Dissolution behavior of Jordanian clay-rich materials in alkaline solutions for alkali activation purpose. Part I10.1016/j.clay.2015.08.004 ↗
3. An evaluation of the feasibility of several industrial wastes and natural materials as precursors for the production of alkali activated materials
4. Macro- and micro-properties of engineered cementitious composites (ECCs) incorporating industrial waste materials: a review10.1007/s13369-020-04729-7 ↗
5. Improving the geopolymeric reactivity of Earth of Datça as a natural pozzolan in developing green binder10.1016/j.jobe.2021.102760 ↗
6. Potentiality of the use of pyroclastic volcanic residues in the production of alkali activated material10.1007/s12649-020-01004-6 ↗
7. Kinetic study of the kaolinite-mullite reaction sequence. Part I: Kaolinite dihydroxylation10.1007/BF00202253 ↗
8. Use of contaminated sand blasting grit for production of cement mortars
9. Thermal behavior and antibacterial studies of a carbonate Mg–Al-based layered double hydroxide (LDH) for in vivo uses
10. Al2O3 ·2SiO2 powders synthesized via sol–gel as pure raw material in geopolymer preparation10.1111/jace.14724 ↗
11. Thermal and microbiological performance of metakaolin-based geopolymers cement with waste glass10.1016/j.clay.2020.105763 ↗
12. The properties of fly ash based geopolymer mortars made with dune sand10.1016/j.matdes.2015.12.070 ↗
13. Recycling of waste corundum abrasive powder in MK-based geopolymers10.3390/polym14112173 ↗
14. Directive 2008/98/EC
15. Blasted copper slag as fine aggregate in Portland cement concrete10.1016/j.jenvman.2017.03.032 ↗
16. Physical evolution of Na-geopolymer derived from metakaolin up to 1000 °C10.1007/s10853-006-0535-4 ↗
17. An overview of the chemistry of alkali-activated cement-based binders, Chapter 2
18. Thermal dihydroxylation of kaolinite under isothermal conditions10.1016/j.clay.2013.07.017 ↗
19. Energy efficiency of state-of-the-art grinding processes10.1016/j.promfg.2018.02.176 ↗
20. Alkali-activated laterite binders: influence of silica modulus on setting time, rheological behaviour and strength development10.1016/j.clet.2021.100175 ↗
21. Editorial for special issue: alkali activated materials: advances, innovations, future trends10.3390/min11010075 ↗
22. Effect of sulphate and nitrate anions on heavy metal immobilisation in ferronickel slag geopolymers10.1016/j.clay.2012.09.018 ↗
23. Dehydroxylation and high temperature phase formation in sol-gel boehmite characterized by Fourier transform infrared spectroscopy10.1023/A:1018568418302 ↗
24. Effect of very fine aggregate on concrete strength10.1007/BF02472816 ↗
25. Life Cycle Assessment of alkali activated materials for pavement applications: preliminary investigation of precursors10.21809/rilemtechlett.2021.120 ↗
26. An overview of geopolymers derived from industrial, by-products10.1016/j.conbuildmat.2016.09.136 ↗
27. Assessment of proper-ties of metakaolin-based geopolymers applied in the conservation of tile facades10.1016/j.conbuildmat.2020.119759 ↗
28. The multistep nature of the kaolinite dehydroxylation: Kinetics and mechanism10.1111/j.1551-2916.2009.03328.x ↗
29. Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymers10.1016/j.colsurfa.2006.12.064 ↗
30. Low-temperature synthesized aluminosilicate glasses: part II. Rheological transformations during low-temperature cure and high-temperature properties of a model compound10.1007/BF00355129 ↗
31. Investigation of interfacial and mechanical properties of alumina-coated steel fiber reinforced geopolymer composites10.1016/j.conbuildmat.2021.123118 ↗
32. Encapsulation of Mg–Zr alloy in metakaolin-based geopolymer10.1016/j.clay.2012.09.023 ↗
33. Development and use of geopolymers for energy conversion: an overview10.1016/j.conbuildmat.2021.125774 ↗
34. Mine clay washing residues as a source for alkali-activated binders10.3390/ma15010083 ↗
35. Sustainable chromium encapsulation: alkali activation route
36. Geopolymer binders from metakaolin using sodium waterglass from waste glass and rice husk ash as alternative activators: a comparative study10.1016/j.conbuildmat.2016.03.184 ↗
37. Preparation of metakaolin based geopolymer coatings on metal substrates as thermal barriers10.1016/j.clay.2009.08.015 ↗
38. Theoretical studies on aluminate and sodium aluminate species in models for aqueous solution: Al(OH)3, Al(OH)4−, and NaAl(OH)410.2138/am-1999-1019 ↗
39. Corundum dissolution in concentrated sodium hydroxide solution10.1007/s41230-016-5064-4 ↗