journal article·2024-01

Composite of gum arabic and halloysite as a bio-based acidic catalyst for efficient synthesis of 5-hydroxymthylfurfural

Samahe Sadjadi, Soheila Yaghoubi, Xuemin Zhong, Peng Yuan, Majid M. Heravi

Publisher page

Abstract

A novel acidic bio-based composite has been synthesized via covalent conjugation of two acidic natural compounds, i.e. halloysite clay mineral and Gum Arabic. Measurement of the acidity of the composite confirmed that its acidity was higher than that of individual components. Halloysite-Gum Arabic composite was successfully applied as a biocompatible catalyst for the dehydration of fructose to 5-hydroxymthylfurfural. The reaction conditions were also optimized via Response Surface Method (RSM) and it was found that using 30 mg catalyst per 0.1 mmol fructose led to 99.2% product yield at 100 °C in 105 min. Gratifyingly, the as-prepared composite was recyclable for seven consecutive runs and only insignificant loss of activity was observed after each run. Notably, the recycled catalyst was structurally and morphologically stable.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Catalysis for Biomass Conversion · Mesoporous Materials and Catalysis · Microbial Metabolites in Food Biotechnology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Effects of preparation temperature on production of graphene oxide by novel chemical processing10.1016/j.ceramint.2020.12.159 ↗
2. XPS, structural and antimicrobial studies of novel functionalized halloysite nanotubes10.1038/s41598-022-25270-7 ↗
3. Self‐organization of ionic liquid‐modified organosilica hollow nanospheres and heteropolyacids: efficient preparation of 5‐HMF under mild conditions10.1002/cctc.201900285 ↗
4. Effects of acid-treatment of halloysite on the characteristics and catalytic performance of palladated halloysite in lubricants hydrogenation reaction10.1016/j.inoche.2022.109438 ↗
5. Pd immobilized on dendrimer decorated halloysite clay: Computational and experimental study on the effect of dendrimer generation, Pd valance and incorporation of terminal functionality on the catalytic activity10.1016/j.jcis.2018.07.039 ↗
6. Production of palladium nanocatalyst supported on modified gum arabic and investigation of its potential against treatment of environmental contaminants10.1016/j.ijbiomac.2020.07.321 ↗
7. Catalytic dehydration of fructose to HMF over sulfonic acid functionalized periodic mesoporous organosilicas: role of the acid density10.1039/C4CY00137K ↗
8. Upgrading Furfurals to Drop-in Biofuels: an Overview10.1021/acssuschemeng.5b00271 ↗
9. A structural comparison of halloysite nanotubes of different origin by Small-Angle Neutron Scattering (SANS) and Electric Birefringence10.1016/j.clay.2017.12.044 ↗
10. Conversion of fructose into 5-hydroxymethylfurfural catalyzed by recyclable sulfonic acid-functionalized metal–organic frameworks10.1039/C3GC42414F ↗
11. Self-assembly of mesoporous TiO2 nanospheres viaaspartic acid templating pathway and its catalytic application for 5-hydroxymethyl-furfural synthesis10.1039/c1jm13229f ↗
12. Effects of calcination and acid treatment on improving benzene adsorption performance of halloysite10.1016/j.clay.2019.105240 ↗
13. A computational and experimental investigation of halloysite silicic surface modifications after alkaline treatment10.1016/j.clay.2022.106813 ↗
14. Dehydration of sugars to 5-hydroxymethylfurfural and non-stoichiometric formic and levulinic acids over mesoporous Ta and Ta-W oxide solid acid catalysts10.1016/S1872-2067(19)63519-9 ↗
15. Conversion of fructose and glucose into 5-hydroxymethylfurfural with lignin-derived carbonaceous catalyst under microwave irradiation in dimethyl sulfoxide–ionic liquid mixtures10.1016/j.biortech.2012.02.108 ↗
16. Selective dehydration of fructose to 5-hydroxymethylfurfural catalyzed by mesoporous SBA-15-SO3H in ionic liquid BmimCl10.1016/j.carres.2012.01.003 ↗
17. Prospective review on the application of biofuel 2,5-dimethylfuran to diesel engine10.1016/j.joei.2020.10.004 ↗
18. Tin phosphate as a heterogeneous catalyst for efficient dehydration of glucose into 5-hydroxymethylfurfural in ionic liquid10.1016/j.apcatb.2017.09.049 ↗
19. Preparation of rare earth metal ions promoted MnOx@halloysite catalyst for highly efficient catalytic oxidation of toluene10.1016/j.clay.2023.107081 ↗
20. Halloysite nanotube microspheres connected to an electrospun nanofiber membrane for effective and riskless hemostasis10.1016/j.clay.2023.107045 ↗
21. Pd on nitrogen rich polymer–halloysite nanocomposite as an environmentally benign and sustainable catalyst for hydrogenation of polyalfaolefin based lubricants10.1016/j.jiec.2021.02.031 ↗
22. Solvent-Free production of 5-Hydroxymethylfurfural from Deep Eutectic Substrate Reaction Mixtures over a Magnetically Recoverable Solid Acid Catalyst10.1021/acssuschemeng.0c07272 ↗
23. Greener assembling of MoO3 nanoparticles supported on gum arabic: cytotoxic effects and catalytic efficacy towards reduction of p-nitrophenol10.1007/s10098-019-01726-9 ↗
24. Relation between surface acidity and reactivity in fructose conversion into 5-HMF using tungstated zirconia catalysts10.1016/j.catcom.2012.10.005 ↗
25. An assembly of organic-inorganic composites using halloysite clay nanotubes10.1016/j.cocis.2018.01.002 ↗
26. Catalytic transformation of fructose and sucrose to HMF with proline-derived ionic liquids under mild conditions10.1155/2014/978708 ↗
27. Immobilizing Cr3+ with SO3H-functionalized solid polymeric ionic liquids as efficient and reusable catalysts for selective transformation of carbohydrates into 5-hydroxymethylfurfural10.1016/j.biortech.2013.06.063 ↗
28. Effective catalytic reduction of 4-nitrophenol to 4-aminophenol over etched halloysite nanotubes@α-Ni(OH)2
29. Halloysite nanotubes filled with MgO for paper reinforcement and deacidification10.1016/j.clay.2021.106231 ↗
30. Strategies for palladium nanoparticles formation on halloysite nanotubes and their performance in acetylene semi-hydrogenation10.1016/j.clay.2022.106763 ↗
31. In-situ synthesis of ZnO nanoparticles using gum arabic based hydrogels as a self-template for effective malachite green dye adsorption10.1007/s10924-020-01713-y ↗
32. Interfacial charge transfer between phenyl-capped aniline tetramer films and iron oxide surfaces10.1021/acs.jpcc.6b09950 ↗
33. Polystyrene immobilized Brønsted acid ionic liquid as an efficient and recyclable catalyst for the synthesis of 5-hydroxymethylfurfural from fructose10.1016/j.molliq.2021.117811 ↗
34. Sulfonic acid functionalized dendrimer-grafted cellulose as a solid acid catalyst for the high-yield and green production of 5-hydroxymethylfurfural10.1039/D2SE00235C ↗
35. Acid modified H-USY zeolite for efficient catalytic transformation of fructose to 5-hydroxymethyl furfural (Biofuel Precursor) in methyl isobutyl ketone–water biphasic system10.1021/acs.energyfuels.7b03684 ↗
36. Halloysite–TiO2 nanocomposites: Synthesis, characterization and photocatalytic activity10.1016/j.apcatb.2012.12.012 ↗
37. Physicochemical characterization of organosilylated halloysite clay nanotubes10.1016/j.micromeso.2015.08.002 ↗
38. The interactions between the two negatively charged polysaccharides: Gum Arabic and alginate10.1016/j.foodhyd.2020.106343 ↗
39. Halloysite-based hybrids/composites in catalysis10.1016/j.clay.2020.105537 ↗
40. Halloysite functionalized with Cu (II) Schiff base complex containing polymer as an efficient catalyst for chemical transformation10.1016/j.inoche.2021.108955 ↗
41. Halloysite nanoclay with high content of sulfonic acid-based ionic liquid: a novel catalyst for the synthesis of tetrahydrobenzo[b]pyrans10.3390/catal11101172 ↗
42. Combined experimental and computational study on the role of ionic liquid containing ligand in the catalytic performance of halloysite-based hydrogenation catalyst10.1016/j.molliq.2021.115740 ↗
43. Clay-supported acidic ionic liquid as an efficient catalyst for conversion of carbohydrates to 5-hydroxymethylfurfural10.1016/j.molliq.2023.121847 ↗
44. Ionic liquid-functionalized halloysite as an efficient catalyst for the production of 5-hydroxymethylfurfural10.1016/j.clay.2023.106896 ↗
45. Tuning the acidity of halloysite by polyionic liquid to develop an efficient catalyst for the conversion of fructose to 5-hydroxymethylfurfural10.1038/s41598-023-34876-4 ↗
46. Effect of support hydrophobicity of halloysite-based catalysts on the polyalphaolefin hydrofinishing performance10.1002/aoc.6719 ↗
47. Supported ionic liquid silica nanoparticles (SILnPs) as an efficient and recyclable heterogeneous catalyst for the dehydration of fructose to 5-hydroxymethylfurfural10.1039/c0gc00690d ↗
48. Acacia gum polysaccharide based hydrogel wound dressings: Synthesis, characterization, drug delivery and biomedical properties10.1016/j.carbpol.2017.02.039 ↗
49. Environmentally benign halloysite nanotube multilayer assembly significantly reduces polyurethane flammability10.1002/adfm.201703289 ↗
50. A new nanomagnetic Pd-Co bimetallic alloy as catalyst in the Mizoroki-Heck and Buchwald-Hartwig amination reactions in aqueous media10.1038/s41598-021-95931-6 ↗
51. Production of HMF and DMF biofuel from carbohydrates through catalytic pathways as a sustainable strategy for the future energy sector10.1016/j.fuel.2022.124474 ↗
52. Efficient hydro-finishing of polyalfaolefin based lubricants under mild reaction condition using Pd on ligands decorated halloysite10.1016/j.jcis.2020.08.112 ↗
53. Phosphorylated mesoporous carbon as effective catalyst for the selective fructose dehydration to HMF10.1016/S2095-4956(13)60037-6 ↗
54. Halloysite nanotube-based cobalt mesocatalysts for hydrogen production from sodium borohydride10.1016/j.jssc.2018.08.042 ↗
55. Halloysite nanoclay based CdS formulations with high catalytic activity in hydrogen evolution reaction under visible light irradiation10.1021/acssuschemeng.7b02272 ↗
56. Ce doping TiO2/halloysite nanotubes photocatalyst for enhanced electrons transfer and photocatalytic degradation of Tetracycline
57. High yield production and purification of 5-hydroxymethylfurfural10.1002/aic.14019 ↗
58. High yield production and purification of 5-hydroxymethylfurfural10.1002/aic.14019 ↗
59. Catalytic conversion of fructose and 5-hydroxymethylfurfural into 2,5-furandicarboxylic acid over a recyclable Fe3O4–CoOx magnetite nanocatalyst10.1021/sc500702q ↗
60. Efficient dehydration of fructose into 5-HMF using a weakly-acidic catalyst prepared from a lignin-derived mesoporous carbon10.1016/j.fuel.2022.123255 ↗
61. Determination of physiochemical properties of Gum Arabic as a suitable binder in emulsion house paint10.3126/ije.v5i1.14565 ↗
62. Investigation of amphiphilic polypeptoid-functionalized halloysite nanotubes as emulsion stabilizer for oil spill remediation10.1021/acsami.9b08623 ↗
63. N-doped carbon layer-coated au nanocatalyst for H2-free conversion of 5-hydroxymethylfurfural to 5-methylfurfural10.1016/S1872-2067(21)64049-4 ↗
64. Substitutional doping for aluminosilicate mineral and superior water splitting performance10.1186/s11671-017-2192-8 ↗
65. Conversion of cellulose to HMF in ionic liquid catalyzed by bifunctional ionic liquids10.1016/j.biortech.2012.11.015 ↗
66. New synthetic approaches to biofuels from lignocellulosic biomass10.1016/j.cogsc.2019.08.005 ↗