Encapsulation of butylimidazole in smectite and slow release for enhanced copper corrosion inhibition
Source abstract
Abstract
Butylimidazole (Bim) a well-known copper corrosion inhibitor was encapsulated in its cationic form, in a smectite type clay mineral (Sabga clay mineral (Sg)) by cation exchange of sodium cations located in the interlayer space of the layered clay mineral. Physicochemical characterization (XRD, FT-IR and TGA) revealed that Bim was intercalated (0.48 mmol per gram of hybrid material) in its cationic form. The intercalation was followed by an increase of the layer to layer distance from 11.4 Å to 13.9 Å. The composite material (Sg-Bim) was then applied as copper corrosion inhibitor in concentrated sodium sulphate solution (0.1 M) and experiments monitored electrochemically. For a given concentration of Sg-Bim, the corrosion potential increased as a function of time. The corrosion inhibition percentages obtained both by corrosion current densities (up to 80.7%) and charge transfer resistance (up to 87.0%) were found to increase with the release time. This confirmed that the clay mineral Sg effectively served as a nanocontainer for the encapsulation of Bim. Moreover, the release of Bim occurred gradually when the organoclay was immersed in concentrated saline solution. Investigations on the effect of temperature on the process confirmed that the action of released Bim against copper corrosion consisted in improving the stability of the Cu2O protecting layer, according to a physisorption mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Clay nanotubes for corrosion inhibitor encapsulation: release control with end stoppers10.1039/c0jm00810a ↗
2. Corrosion inhibitors based on chitosan-heptanoate modified beidellite10.1016/j.clay.2012.04.025 ↗
3. Intercalation of macrocyclic compounds (crown ethers and cryptands) into 2:1 phyllosilicates. Stability and calorimetric study10.1021/la00016a039 ↗
4. An enhancement on corrosion resistance of low carbon steel by a novel bio-inhibitor (leech extract) in the H2SO4 solution10.1016/j.surfin.2021.101159 ↗
5. Myrtus communis as green inhibitor of copper corrosion in sulfuric acid10.1021/ie404056w ↗
6. The corrosion inhibition and adsorption behavior of mercaptobenzimidazole and bis-mercaptobenzimidazole on carbon steel in 1.0 M HCl: Experimental and computational insights
7. Molecular control of the functional and spatial interlayer environment of kaolinite by the grafting of selected pyridinium ionic liquids10.1016/j.clay.2017.04.019 ↗
8. Surface protection of copper in 3% NaCl solution by using 1-(n-butyl) imidazole self-assembled monolayer
9. Investigation of smectite hydration properties by modeling experimental X-ray diffraction patterns: part I. Montmorillonite hydration properties10.2138/am.2005.1776 ↗
10. The use of quantum chemical methods in corrosion inhibitor studies10.1016/j.corsci.2008.08.043 ↗
11. Study of the propolis extract as a corrosion inhibitor of copper alloy in ethylene glycol/water 0.1 M NaCl10.4314/jfas.v9i2.3 ↗
12. Studies of the corrosion inhibition of copper in Na2SO4 solution using polarization and electrochemical impedance spectroscopy10.1016/j.matchemphys.2009.12.044 ↗
13. Relation between the semiconducting properties of a passive film and reduction reaction rates10.1149/1.3077576 ↗
14. Landolt · 2007
15. One-step co-intercalation of cetyltrimethylammonium and thiourea in smectite and application of the organoclay to the sensitive electrochemical detection of Pb (II)10.1016/j.clay.2014.07.014 ↗
16. A template approach for the multifunctionalization of the interlayer space of kaolinite10.1016/j.clay.2020.105858 ↗
17. Performances of alkaloid extract from Rauvolfia macrophylla Stapf toward corrosion inhibition of C38 steel in acidic media10.1021/acsomega.9b01076 ↗
18. Pourbaix · 1974
19. Three indazole derivatives as corrosion inhibitors of copper in a neutral chloride solution10.1016/j.corsci.2017.07.012 ↗
20. Crown ether intercalations with phyllosilicates10.1038/276596a0 ↗
21. Corrosion inhibition of copper by potassium ethyl xanthate in acidic chloride solutions10.1016/j.corsci.2004.12.001 ↗
22. Inhibition of copper corrosion in sodium nitrate solutions with nontoxic inhibitors10.1016/j.corsci.2008.02.015 ↗
23. Electrochemical and gravimetric study on the corrosion and corrosion inhibition of pure copper in sodium chloride solutions by two azole derivative10.1016/S1452-3981(23)13429-8 ↗
24. Advances in LDH coatings on Mg alloys for biomedical applications: a corrosion perspective10.1016/j.clay.2020.105948 ↗
25. Comparison between lacunary and saturated keggin polyoxometalates as steel corrosion inhibitors in chloride solution: contribution of the lacuna in the inhibition mechanism10.1002/slct.202001591 ↗
26. Functionalization of natural smectite-type clays by grafting with organosilanes: physico-chemical characterization and application to mercury (II) uptake10.1039/b308787e ↗
27. Incorporation of an indole-3 butyric acid modified clay in epoxy resin for corrosion protection of carbon steel10.1016/j.surfcoat.2008.04.092 ↗
28. Investigation of the first stages of the localized corrosion of pure copper combining EIS, FE-SEM and FE-AES10.1016/j.electacta.2006.12.039 ↗
29. Quinoline and its derivatives as corrosion inhibitors: a review10.1016/j.surfin.2020.100634 ↗
30. Synthesis, characterization, and controlled release anticorrosion behavior of benzoate intercalated Zn–Al layered double hydroxides10.1016/j.materresbull.2011.07.021 ↗
31. Using high throughput experimental data and in silico models to discover alternatives to toxic chromate corrosion inhibitors10.1016/j.corsci.2016.02.008 ↗
32. Experimental and theoretical investigations of some pyrazolo-pyrimidine derivatives as corrosion inhibitors on copper in sulfuric acid solution10.1016/j.apsusc.2018.08.037 ↗
33. Solvent effect on the grafting of an organophilic silane onto smectite-type clay: application as electrode modifiers for pesticide detection10.1002/elan.201700144 ↗
34. Grafting of organophilic silane in the interlayer space of acid-treated smectite: application to the direct electrochemical detection of glyphosate10.1016/j.clay.2020.105513 ↗
35. Effect of SiO2: Na2O molar ratio of sodium silicate on the corrosion resistance of silicate conversion coatings10.1016/j.surfcoat.2009.10.024 ↗
36. Inhibitive properties and adsorption of purpald as a corrosion inhibitor for copper in nitric acid medium10.1021/ie301465k ↗
37. High corrosion protection of a polyaniline/organophilic montmorillonite coating for magnesium alloys10.1016/j.porgcoat.2013.01.008 ↗