Dispersion of kaolin particles with carboxymethylated xylan
Source abstract
Abstract
Abstract In this work, the performance of carboxymethylated xylan (CMX) as a dispersant for kaolin particles in an aqueous system (20 g/L) was systematically investigated. The influence of process parameters, such as pH and CMX dosage, on the kaolin dispersions was also determined. Adsorption studies revealed that CMX had a maximum adsorption of 2.48 mg/g on kaolin particles under the treatment conditions of pH 6, 15 mg/g CMX/kaolin, 30 °C and 30 min. The minimum zeta potential of − 33 mV and the highest stability for the kaolin dispersions were found under the same treatment conditions using photometric dispersion, vertical scan analysis and turbidimetry. Isotherm and kinetic studies revealed that the adsorption of CMX on kaolin particles tended to significantly impact the zeta potential and relative turbidity of the kaolin dispersion, but the zeta potential did not necessarily predict the high stability of the kaolin dispersion. CMX improved the stability of the kaolin dispersions more than unmodified xylan (UX) and mechanical stirring.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Clay minerals and soil interactions · Enhanced Oil Recovery Techniques · Soil and Unsaturated Flow
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Electrokinetic and rheological properties of highly concentrated kaolin dispersions: influence of particle volume fraction and dispersant concentration10.1016/j.clay.2010.03.020 ↗
2. Dispersion of alumina coated TiO2 particles by adsorption of sodium polyacrylate10.1016/S0927-7757(00)00705-6 ↗
3. Molecular controls on kaolinite surface charge10.1006/jcis.1996.0557 ↗
4. Production of transparent suspensions by real grinding of fused corundum10.1016/j.powtec.2011.06.018 ↗
5. Turbiscan lab expert analysis of the stability of ethosomes and ultradeformable liposomes containing a bilayer fluidizing agent10.1016/j.colsurfb.2009.03.007 ↗
6. Carboxymethyl lignin as stabilizing agent in aqueous ceramic suspensions10.1016/j.indcrop.2011.08.015 ↗
7. Influence of deagglomeration and carboxymethylcellulose binders on rheological behaviour of kaolin suspensions10.1016/S0169-1317(03)00125-X ↗
8. Influence of non-ionic poly (ethylene glycol) polymer PEG on electrokinetic and rheological properties of bentonite suspensions10.1002/app.10965 ↗
9. An investigation on utilization of poly-electrolytes as dispersant for kaolin slurry and its slip casting properties10.1016/j.ceramint.2007.07.012 ↗
10. Preparation and evaluation of carboxymethylated lignin as dispersant for aqueous graphite suspension using Turbiscan lab analyzer10.1080/01932691.2012.686248 ↗
11. Mixture design to optimize the amount of deflocculants in aqueous porcelain suspensions
12. Colloidal behaviour of montmorillonite suspensions in the presence of non-ionic polymer
13. Process control and optimized preparation of porous alumina ceramics by starch consolidation casting10.1016/j.jeurceramsoc.2011.05.018 ↗
14. Nanosized calcium carbonate stabilized by poly (ethylene oxide)-b-poly (acrylic acid) block copolymers10.1021/la052419e ↗
15. Sulfomethylated kraft lignin as a flocculant for cationic dye10.1016/j.colsurfa.2016.05.009 ↗
16. The effect of polyacrylamide charge density and molecular weight on the flocculation and sedimentation behaviour of kaolin suspensions10.1016/j.seppur.2006.04.005 ↗
17. Synthesis and characterization of carboxymethylated xylan and its application as a dispersant10.1016/j.carbpol.2016.03.036 ↗
18. Production of water soluble kraft lignin via carboxymethylation using sodium chloroacetate10.1016/j.eurpolymj.2015.07.028 ↗
19. Current understanding of the mechanism of polysaccharide adsorption at the mineral/aqueous solution interface10.1016/j.minpro.2007.03.006 ↗
20. YAG ceramic processed by slip casting via aqueous slurries10.1016/j.ceramint.2006.10.018 ↗
21. Influence of lignosulfonates on the properties of dimethomorph water-dispersible granules10.15376/biores.4.2.589-601 ↗
22. Fluidity of highly concentrated kaolin suspensions: influence of particle concentration and presence of dispersant10.1016/j.colsurfa.2008.04.040 ↗
23. The dispersive effect of sodium silicate on kaolinite particles in process water: implications for iron ore processing10.1346/CCMN.2011.0590302 ↗
24. Surface charge and rheological properties of raw porcelain gres suspension with acrylic copolymers bearing carboxylic groups10.1016/j.jeurceramsoc.2008.07.024 ↗
25. Selection and characterization of geological materials for use as geopolymer precursors10.1179/1743676115Y.0000000055 ↗
26. Characterization of instability of concentrated dispersions by a new optical analyzer: the Turbiscan MA 100010.1016/S0927-7757(98)00680-3 ↗
27. Rheological and electrical properties of bentonite in anionic polystyrene sulfonate and non-ionic poly (vinyl alcohol)10.1002/app.26005 ↗
28. The rheological behaviour of kaolin suspensions
29. Flocculation behaviour and mechanisms of cationic inorganic microparticle/polymer system10.1016/S0927-7757(01)00903-7 ↗
30. Sodium tripolyphosphate as dispersing agents for kaolin suspensions: rheological characterization10.1016/S0927-7757(01)01024-X ↗
31. Effect of carboxymethyl cellulose and ionic strength on stability of mineral suspensions in potash ore flotation systems10.1016/S0021-9797(02)00225-4 ↗
32. Deflocculation of kaolin suspensions – the effect of various electrolytes
33. Effect of sodium pyrophosphate on the flotation separation of chalcopyrite from galena10.1016/j.ijmst.2012.04.011 ↗
34. Optimization of coagulation-flocculation parameters using a photometric dispersion analyzer10.5194/dwes-7-73-2014 ↗
35. Effect of solution chemistry on clay colloid release from an iron oxide-coated aquifer sand10.1021/es00058a025 ↗
36. Adsorption of polyacrylic acid and sodium dodecylbenzenesulfonate on kaolinite10.1006/jcis.1995.1171 ↗
37. Sulfur free dissolving pulps and their application for viscose and lyocell10.1007/s10570-011-9532-0 ↗
38. Minerological and chemical charcaterization of DD3 kaolin from the east of Algeria
39. Dispersion of aqueous nano-sized alumina suspensions using cationic polyelectrolyte10.1016/j.materresbull.2006.01.032 ↗
40. Surface charge heterogeneity of kaolinite in aqueous suspension in comparison with montmorillonite10.1016/j.clay.2006.05.009 ↗
41. Roles of polymeric dispersant charge density on lead zirconate titanate aqueous processing10.1016/j.ceramint.2010.05.018 ↗
42. Aqueous dispersion of red clay based ceramic powder with the addition of starch10.1590/S1516-14392013005000002 ↗
43. Study of suspension settling: a approach to determine suspension classification and particle interactions10.1016/j.colsurfa.2006.10.074 ↗
44. A water soluble cationic flocculant synthesized by dispersion polymerization in aqueous salts solution10.1016/j.seppur.2009.03.044 ↗
45. Cationic xylan-METAC copolymer as a flocculant for clay suspensions10.1039/C6RA05223A ↗
46. Effect of low temperature on coagulation kinetics and floc surface morphology using alum10.1016/j.desal.2007.12.033 ↗
47. Influence of dispersants on the solubility of calcined kaolin10.1016/S0169-1317(98)00016-7 ↗
48. The effect of rapid mixing on the break up and reformation of flocs10.1002/jctb.1056 ↗
49. Influence of dispersing agents and solution conditions on the solubility of crude kaolin10.1016/j.jcis.2003.09.015 ↗
50. Adsorption of a low-molecular weight polyacrylic acid on silica, alumina and kaolin10.1006/jcis.2001.7941 ↗