Comparison of antibacterial activity and cytotoxicity of silver nanoparticles and silver-loaded montmorillonite and saponite

Although silver nanoparticles are known for their antibacterial activity, little research has been carried out on what synthesis method provides the most effective particles. In this study, silver nanoparticles were synthesised via chemical reduction by using silver nitrate as the silver precursor, ascorbic acid as the reducing agent and sodium citrate as the stabilising agent. The solutions were adjusted to several pH values employing sodium hydroxide, citric acid or nitric acid. Dynamic light scattering and absorption spectra in the ultraviolet/visible region characterisation revealed that employing nitric acid to adjust the pH produced more varied and larger silver particle sizes. Then, silver nanoparticles were supported on montmorillonite and saponite through wet impregnation or ion exchange methods. Scanning electron microscopy, energy-dispersive X-ray spectroscopy and transmission electron microscopy characterisation confirmed that silver nanoparticles were successfully loaded onto the clay minerals. Next, the antibacterial activity of the samples was evaluated against Escherichia coli and Staphylococcus aureus by determining their minimum inhibitory concentrations and minimum bactericidal concentrations. The free silver nanoparticles did not show any antibacterial activity at 125 mg/L. In contrast, the silver-loaded samples obtained by wet impregnation and with a higher silver content displayed the strongest antibacterial effect. Finally, the cytotoxicity of the samples was determined in GM07492-A cell line by using an XTT colorimetric assay. The calculated IC50 values revealed that the supported silver nanoparticles were barely toxic. Thus, the silver-loaded clay minerals obtained here are promising antibacterial materials with a high-grade safety profile.