Red clay application in the utilization of paper production sludge and scrap glass to fabricate ceramic materials
Source abstract
Abstract
Abstract The article describes the compositions with red clay, as principal component, for utilization of paper production sludge and scrap glass to fabricate red ceramics at sintering temperatures of 700°, 800°, 850°, 900°, 1000°, 1050° and 1100 °C. The raw and final materials were analyzed by XRF, XRD, SEM, EDS and LAMMA methods. The flexural strength tests of obtained ceramics reached till 11.7 MPa, water absorption till 12.6%, bulk densities varied from 1.79 to 1.86 g/cm 3 , and shrinkage till 1.4%. These properties can be attributed to the sintering at 700° and 1100 °C of ceramics with glassy structures and small inclusions of new crystalline minerals, such as mullite, albite, orthoclase and nepheline.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Pigment Synthesis and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Industrial wastes as low-cost potential adsorbents for the treatment of wastewater laden with heavy metals10.1016/j.cis.2011.04.005 ↗
2. Utilization of waste paper pulp by partial replacement of cement in concrete
3. Paper mill sludge–soil mixture: kinetic and thermodynamic tests of cadmium and lead sorption capability10.1016/S0026-265X(03)00074-2 ↗
4. Battistelle · 2002
5. BRACELPA — Cellulose and Paper Association of Brazil
6. Fuel specifications-sludge, environmental issues and technology in the 420 pulp and paper industry
7. Campregher
8. CANMET, Energy Technology Centre · 2005 · 18
9. Casagrande · 2002
10. Progress and recent trends in biofuels10.1016/j.pecs.2006.06.001 ↗
11. Paper sludge and paper sludge ash in Portland cement manufacture
12. Epplar · 2005
13. Fluid bed incineration of paper mill sludge
14. Foelkel · 2008
15. Sintering and characterization of ceramics containing paper sludge, glass cullet and different types of clayey materials10.1016/j.ceramint.2010.12.005 ↗
16. Structural performance of concrete with paper sludge as fine aggregates partial replacement enhanced with admixtures
17. Composting of deinking sludge from the recycled paper manufacturing industry10.1016/j.biortech.2004.09.025 ↗
18. Paper mill sludge as a component of wood adhesive formulation10.1515/HF.2007.112 ↗
19. Research into using recycled waste paper residues in construction products
20. Paper sludge as a feasible soil amendment for the immobilization of Pb2+10.1016/S1001-0742(09)60123-6 ↗
21. Preparation and sorption properties of materials from paper sludge10.1016/j.jhazmat.2007.06.058 ↗
22. Experimental research of microwave pyrolysis about paper mill sludge10.1016/j.applthermaleng.2011.07.037 ↗
23. Paper mill industrial waste as a sustainable source for high efficiency absorbent production10.1016/j.wasman.2011.01.012 ↗
24. Energy and resource utilization of deinking sludge pyrolysis10.1016/j.apenergy.2010.12.025 ↗
25. Controle dimensional e do formato de revestimento cerâmico. Parte I: Dimensões
26. Misawa · 2002
27. Construction materials as a waste management solution for cellulose sludge10.1016/j.wasman.2010.09.017 ↗
28. Monte · 2009
29. NBR 15270–3 · 2005
30. Burning mill sludge in a fluidized-bed incinerator and waste-heat-recovery system
31. Why energy from waste incineration is an essential component of environmentally responsible waste management10.1016/j.wasman.2005.02.008 ↗
32. Evaluation of paper sludge landfill cover settlement10.1061/40519(293)2 ↗
33. Use of industrial by-products in landfill cover
34. Use of paper and pulp production wastes in manufacture of ceramic bricks
35. Chemical properties and biodegradability of waste paper mill sludge to be used for landfill covering10.1177/0734242X07079188 ↗